Journal ArticleDOI
Hybrid composites made of unidirectional T600S carbon and E-glass fabrics under quasi-static loading
TLDR
Finite element analysis and experimental studies are presented on in-plane tensile and compressive properties under quasi-static loading for two types of hybrid composites made by using unidirectional T620S carbon and E-glass fabrics in a common matrix, epoxy resin this article.Abstract:
Finite element analysis and experimental studies are presented on in-plane tensile and compressive properties under quasi-static loading for two types of hybrid composites made by using unidirectional T620S carbon and E-glass fabrics in a common matrix, epoxy resin Results are also generated for plain T620S carbon/epoxy and plain E-glass/epoxy composite laminates Quantitative data for tensile and compressive properties are presented It is observed that for hybrid composites, placing carbon and glass fiber parts alternately in every layer (intralayer configuration) gives higher tensile and compressive strengths Tensile failure strain is higher for intralayer compared to interlayer hybrid configurationread more
Citations
More filters
BookDOI
Mechanics of composite materials
TL;DR: In this article, the authors presented a comprehensive analysis of the four Elastic Moduli coefficients of a Unidirectional Lamina Coefficients of Thermal Expansion and Moisture Expansion.
Journal ArticleDOI
Hybrid effect and pseudo-ductile behaviour of unidirectional interlayer hybrid FRP composites for civil engineering applications
TL;DR: In this article, an experimental study on the tensile stress-strain curves of interlayer (layer-by-layer) unidirectional hybrid FRP composites was conducted aiming at evaluating the corresponding hybrid effect and pseudo-ductility of this innovative solution.
Journal ArticleDOI
Hybrid Effect in In-Plane Loading of Carbon/Glass Fibre Based Inter- and Intraply Hybrid Composites
TL;DR: In this article, a quasi-static tensile and compressive loading of composites hybridized at two levels: intraply and interply, was analyzed and the results showed that different hybridization strategies can be exploited to balance cost and performance of composite for structural and lightweight applications.
Journal ArticleDOI
Low-Velocity Impact Behavior of Interlayer/Intralayer Hybrid Composites Based on Carbon and Glass Non-Crimp Fabric.
TL;DR: The results revealed that the hybrid structure played an important role in peak force and the absorbed energy, and that the Hybrid interface had an influence on damage modes, whereas the intralayer hybrid composite laminate damage was affected by the impact location.
Journal ArticleDOI
Digital image processing and thermo-mechanical response of neat epoxy and different laminate orientations of fiber reinforced polymer composites for vibration isolation applications
TL;DR: In this article, a camera-based advanced image processing technique called as digital image correlation is employed to obtain the full-field strain fields and identify the direction of failure of the matrix and composites as a function of fiber orientation angle.
References
More filters
Book
Microstructural design of fiber composites
TL;DR: In this article, the performance design of composite microstructures is discussed and the optimum performance design for composite micro-structures are discussed, and recent developments in the mechanics of laminated composites are surveyed, emphasizing thick laminates, hygrothermal effects and thermal transient effects.
BookDOI
Mechanics of composite materials
TL;DR: In this article, the authors presented a comprehensive analysis of the four Elastic Moduli coefficients of a Unidirectional Lamina Coefficients of Thermal Expansion and Moisture Expansion.
Journal ArticleDOI
Hybrid composite laminates reinforced with glass/carbon woven fabrics for lightweight load bearing structures
TL;DR: In this article, the authors investigated the influences of stacking sequence of on the strength of hybrid composites comprising materials with differing stiffness and strength, and proposed to selectively incorporate carbon fibres to enhance glass fibre composites along main loading path.
Journal ArticleDOI
A review of the tensile, compressive, flexural and shear properties of hybrid fibre-reinforced plastics.
TL;DR: In this article, the authors present a survey of hybrid composites with a special emphasis on the basic mechanical properties of continuous-fibre composites and the models used to predict them.
Journal ArticleDOI
Tensile and interfacial properties of unidirectional flax/glass fiber reinforced hybrid composites
TL;DR: In this paper, the authors studied the mechanical properties of unidirectional flax and glass fiber reinforced hybrid composites with the aim of investigation on the hybrid effects of the composites made by natural and synthetic fibers.