Open AccessBook
Manufacturing Processes for Engineering Materials
Reads0
Chats0
TLDR
In this paper, the authors present the fundamental properties of materials and their properties, including surfaces, tribology, dimensional characteristics, inspection, and product quality assurance, and manufacturing properties of metals.Abstract:
1 Introduction 2 Fundamentals of the mechanical behavior of materials 3 Structure and manufacturing properties of metals 4 Surfaces, tribology, dimensional characteristics, inspection, and product Quality assurance 5 Metal-casting processes and equipment heat treatment 6 Bulk deformation processes 7 Sheet-metal forming processes 8 Material-removal pocesses: cutting 9 Material-removal processes: abrasive, chemical, electrical, and high-energy beams 10 Properties and processing of polymers and reinforced plastics rapid prototyping and rapid tooling 11 Properties and processing of metal powders, ceramics, glasses, composites, and superconductors 12 Joining and fastening processes 13 Fabrication of microelectronic, micromechanical, and microelectromechanical devices nanomanufacturing 14 Automation of manufacturing processes and operations 15 Computer-integrated manufacturing systems 16 Product design and manufacturing in a global competitive environmentread more
Citations
More filters
Book ChapterDOI
Parametric Study of Non-axisymmetric Stretch Flanging Process on AA-6061-T6 Sheet
TL;DR: In this article, the authors carried out FE simulation of two such parameters (punch-die clearance and profile radii) and investigated their effect on maximum circumferential strain (CS) of AA-6061-T6 metal blank through finite element simulation software ABAQUS/CAE 6.13.
Dissertation
Contribution to micro-milling process parameters selection for process planning operations
TL;DR: In this article, the authors focus on increasing knowledge about the micro-milling, establishing relationships between the process parameters as well as machining conditions and the key aspects of the final piece such as accuracy, quality surface finishing and geometrical quality.
Journal ArticleDOI
Improvement of grinding performance and investigation of cutting parameters using a grinding mechanism with secondary rotational axis
TL;DR: In this article, the effects of certain cutting parameters on arithmetical mean deviation of the assessed profile (the Ra parameter) were investigated, and the effect of the specified control factors on the surface roughness was demonstrated using an analysis of variance (ANOVA) test.
Journal ArticleDOI
Characterization of Highly Hardened Surface Layers on Austenitic Stainless Steels
TL;DR: In this paper, the highly hardened surface layers obtained from a TiN-physical vapor deposition (PVD) coating and a treatment that leads to a surface carbon enrichment, applied to American Iron and Steel Institute (AISI) 304, 316, and 316L stainless steels, have been characterized.
Constitutive parameter optimisation using metal forming experiment and finite element analysis
TL;DR: In this paper, the authors investigated a method for optimising parameters in a constitutive model of steel using the finite element method (FEM) and found that a set of parameters where the flow stress of the material is optimised using a power function, relating one hundred predefined values of plastic strain to the flow stresses, gives the best fit to experimental data.