Modeling Laboratory Permeability in Coal Using Sorption-Induced Strain Data

TLDR: Sorption-induced strain and permeability were measured as a function of pore pressure using subbituminous coal from the Powder River basin of Wyoming, USA, and high-volatile bituminous coals from the Uinta-Piceance basin of Utah, USA as discussed by the authors.

Abstract: Sorption-induced strain and permeability were measured as a function of pore pressure using subbituminous coal from the Powder River basin of Wyoming, USA, and high-volatile bituminous coal from the Uinta-Piceance basin of Utah, USA. We found that for these coal samples, cleat compressibility was not constant, but variable. Calculated variable cleat-compressibility constants were found to correlate well with previously published data for other coals. Sorption-induced matrix strain (shrinkage/swelling) was measured on unconstrained samples for different gases: carbon dioxide (CO2), methane (CH4), and nitrogen (N2). During permeability tests, sorption-induced matrix shrinkage was demonstrated clearly by higher-permeability values at lower pore pressures while holding overburden pressure constant; this effect was more pronounced when gases with higher adsorption isotherms such as CO2 were used. Measured permeability data were modeled using three different permeability models that take into account sorption-induced matrix strain. We found that when the measured strain data were applied, all three models matched the measured permeability results poorly. However, by applying an experimentally derived expression to the strain data that accounts for the constraining stress of overburden pressure, pore pressure, coal type, and gas type, two of the models were greatly improved.