Journal ArticleDOI
Modelling of the effects of welding conditions on dilution of stainless steel claddings produced by gas metal arc welding procedures
A. S. Shahi,Sunil Pandey +1 more
TLDR
In this paper, the effects of various gas metal arc welding (GMAW) and universal GMAW process parameters on dilution in single layer stainless steel cladding of low carbon structural steel plates were analyzed.About:
This article is published in Journal of Materials Processing Technology.The article was published on 2008-01-21. It has received 67 citations till now. The article focuses on the topics: Gas metal arc welding & Welding.read more
Citations
More filters
Journal ArticleDOI
Effect of process parameters on clad bead geometry and its shape relationships of stainless steel claddings deposited by GMAW
T. Kannan,J. Yoganandh +1 more
TL;DR: In this article, an experimental study carried out to develop mathematical models to predict clad bead geometry and its shape relationships of austenitic stainless steel claddings deposited by gas metal arc welding process.
Journal ArticleDOI
Multiobjective Optimization of Atmospheric Plasma Spray Process Parameters to Deposit Yttria-Stabilized Zirconia Coatings Using Response Surface Methodology
TL;DR: In this paper, a five-factor five-level central composite rotatable design matrix with full replication for planning, conduction, execution, and development of empirical relationships was designed for the selection of optimum process parameters to achieve desired quality of yttria-stabilized zirconia coating deposits.
Journal ArticleDOI
Predicting the dilution of plasma transferred arc hardfacing of stellite on carbon steel using response surface methodology
TL;DR: In this paper, the authors used response surface methodology to predict and optimize the percentage of the dilution of a cobalt-based hard-faced surface produced by the PTA process.
Journal ArticleDOI
Microstructure and mechanical properties of hot rolled stainless steel clad plate by heat treatment
TL;DR: In this article, a series of stainless steel clad plates were heat treated at the quenching temperatures ranging from 900°C to 1150°C for holding time of 6min and 60min, respectively.
Journal ArticleDOI
Parametric Optimization of Gas Metal Arc Welding Process by Taguchi Method on Weld Dilution
TL;DR: In this article, a mathematical model was developed using parameters such as, wire feed rate (W), welding voltage (V), nozzle-to-plate distance (N), welding speed (S) and gas flow rate (G) on weld dilution.
References
More filters
Journal ArticleDOI
An investigation on the explosive cladding of 316L stainless steel-din-P355GH steel
Ramazan Kaçar,Mustafa Acarer +1 more
TL;DR: In this article, the impact toughness of the cladded metals at a given test temperature is found significantly higher than that of parent plate alone because of the high impact-toughness of 316L austenitic stainless steel layer.
Journal ArticleDOI
Modelling and optimization of a GMA welding process by genetic algorithm and response surface methodology
TL;DR: In this article, a genetic algorithm and response surface methodology have been suggested for determining welding conditions in the gas metal arc (GMA) welding process, and a desirability function approach was used to give different objective function values according to the positive or negative response from the set target value in the optimization problem.
Journal ArticleDOI
Optimizing the laser-welded butt joints of medium carbon steel using RSM
TL;DR: In this paper, the optimization capabilities in design-expert software were used to optimize the keyhole parameters (i.e., maximize penetration, minimize the heat input, width of welded zone, and width of heat-affected zone (W HAZ )) in CW CO 2 laser butt-welding of medium carbon steel.
Journal ArticleDOI
Dependence of melting rate in MIG/MAG welding on the type of shielding gas used
M. Suban,Janez Tušek +1 more
TL;DR: In this article, a study on welding productivity, i.e., melting efficiency of the filler material (solid and cored wires) in various shielding media (four shielding gases and a welding flux), is presented.
Related Papers (5)
Optimization of weld bead geometry for stainless steel claddings deposited by FCAW
P.K. Palani,N. Murugan +1 more
Effects of MIG process parameters on the geometry of the bead in the automatic surfacing of stainless steel
N. Murugan,R.S. Parmar +1 more
Development of mathematical models for prediction of weld bead geometry in cladding by flux cored arc welding
P.K. Palani,N. Murugan +1 more