scispace - formally typeset
Journal ArticleDOI

Production of dense thermonuclear plasmas by intense ion beams

Friedwardt Winterberg
- 01 Jan 1975 - 
- Vol. 17, Iss: 1, pp 69-77
Reads0
Chats0
TLDR
In this article, the authors considered the use of non-relativistic beams of heavy ions for high density plasmas, which can be axially compressed to accelerate the beam and increase the beam power by several orders of magnitude.
Abstract
For very high density plasmas, large energy accumulation within a small volume is required. As an alternative to laser- or relativistic electron-beams, the employment of intense non-relativistic beams of heavy ions is considered. Because of the rather low ion velocities, the beams can be axially compressed thereby shortening the duration of the beam pulse and increasing the beam power by perhaps several orders of magnitude. The low ion velocities make it possible to build up the beam rather slowly in about approximately 10-6 sec, prior to its axial compression and delivery to the target. This long build up time may permit the use of cheap inductive energy storage devices to drive the beam. In case capacitors are used one can simply pulse the beam with the upper terminal of a Marx generator.

read more

Citations
More filters
Journal ArticleDOI

Production of high current particle beams by low pressure spark discharges

TL;DR: In this paper, a new type of particle accelerator was developed based on low pressure spark discharges, which produces pulsed ion as well as electron beams of high intensities in a gas atmosphere at pressures of the order of 1 mbar.
Journal ArticleDOI

Intense pulsed ion beams for fusion applications

TL;DR: A review of the field of intense pulsed ion beam generation and its potential application to fusion research can be found in this paper, where a number of applications in both magnetic confinement and inertial confinement fusion are considered.
Journal ArticleDOI

Ion beam propagation and focusing

TL;DR: In this paper, the propagation and focusing of light ion fusion (LIF) beams is discussed, and the fundamental constraints on ion beam propagation and focus are discussed and ion beam propulsion modes are categorized.
Journal ArticleDOI

Extraction and focusing of intense ion beams from a magnetically insulated diode

TL;DR: A magnetically insulated diode has been used to produce cylindrically converging intense proton beams, which can be propagated across the magnetic field to within 1 cm of the axis.
Journal ArticleDOI

Cross-field injection, propagation, and energy deposition of intense ion beams with application to tokamak plasma heating

Edward Ott, +1 more
- 01 Oct 1977 - 
TL;DR: In this article, the authors explore the possibility of using ion beams for heating tokamak plasmas and show that for proper values of the beam energy, radius, and current, an intense ion beam can penetrate to the interior of a plasma and deposit its energy there.
References
More filters
Journal ArticleDOI

Laser Compression of Matter to Super-High Densities: Thermonuclear (CTR) Applications

TL;DR: In this article, an implosion system energized by a high energy laser was proposed to compress hydrogen to more than 10,000 times liquid density by an imploding system, which makes possible efficient thermonuclear burn of small pellets of heavy hydrogen isotopes, and makes feasible fusion power reactors using practical lasers.
Book

Laser Interaction and Related Plasma Phenomena

TL;DR: The report on the Thirteenth International Conference held at the Naval Postgraduate School, Monterey, California, United States of America, 13-18 April 1997 as discussed by the authors was published in 1997.
Journal ArticleDOI

Generation of Intense Ion Beams in Pulsed Diodes

TL;DR: The generation of high-current pulsed ion beams with ion energy in the range 0.5-10 MeV appears to be possible by modifications of present electron-beam technology as mentioned in this paper.
Journal ArticleDOI

Micro-fission Explosions and Controlled Release of Thermonuclear Energy

TL;DR: In this paper, the concept of high density compression is applied to a fissionable pellet, consisting of 235U, 233U or 239Pu, and very small critical masses become possible.