scispace - formally typeset
Journal ArticleDOI

Scaling the modulation bandwidth and phase efficiency of a silicon optical modulator

Reads0
Chats0
TLDR
In this article, the authors presented an optimized design and detailed simulation of an all-silicon optical modulator based on a silicon waveguide phase shifter containing a metaloxide-semiconductor (MOS) capacitor.
Abstract
We present an optimized design and detailed simulation of an all-silicon optical modulator based on a silicon waveguide phase shifter containing a metal-oxide-semiconductor (MOS) capacitor. Based on a fully vectorial Maxwell mode solver, we analyze the modal characteristics of the silicon waveguide. We show that shrinking the waveguide size and reducing gate oxide thickness significantly enhances the phase modulation efficiency because of the optical field enhancement in the voltage induced charge layers of the MOS capacitor, which, in turn, induce refractive index modulation in silicon due to free carrier dispersion effects. We also analyze the device speed by transient semiconductor device modeling. As both optical absorption and modulation bandwidth increase with increasing doping concentration, we show that, with a nonuniform doping profile in the waveguide, balance between the device operation speed and optical loss can be realized. Our simulation suggests that a TE-polarized optical phase modulator with a bandwidth of 10 GHz and an on-chip optical loss less than 2 dB is achievable in silicon.

read more

Citations
More filters
Journal ArticleDOI

High speed silicon Mach-Zehnder modulator

TL;DR: A silicon modulator with an intrinsic bandwidth of 10 GHz and data transmission from 6 Gbps to 10 Gbps is demonstrated.
Journal ArticleDOI

Silicon photonics for compact, energy-efficient interconnects [Invited]

TL;DR: A novel reconfigurable, 'hitless' switch that does not perturb the express channels either before, during, or after reconfiguration, and multigigahertz operation of low-power, Mach-Zehnder silicon modulators as well as germanium-on-silicon photodiodes are presented.
Journal ArticleDOI

Development of CMOS-Compatible Integrated Silicon Photonics Devices

TL;DR: The motivations for building these devices in silicon, including specific technical examples of low-loss waveguides for Raman lasers, fast silicon modulators, SiGe heterostructures for infrared photodetection, and waveguide tapers are introduced.
Journal ArticleDOI

Silicon-Based Microring Resonator Modulators for Intensity Modulation

TL;DR: In this paper, the authors numerically analyze the characteristics of silicon-based microring modulators consisting of a single-ring resonator and show that cavity dynamics significantly affect the modulation properties.
Journal ArticleDOI

Luminescence of black silicon

TL;DR: In this paper, room temperature visible and near-infrared photoluminescence from black silicon wafers has been observed and quenched above 120 K due to thermalization and competing nonradiative recombination of the carriers.
References
More filters
Book

Fiber-Optic Communication Systems

TL;DR: In this article, the authors present an overview of the main components of WDM lightwave communication systems, including the following: 1.1 Geometrical-Optics Description, 2.2 Wave Propagation, 3.3 Dispersion in Single-Mode Fibers, 4.4 Dispersion-Induced Limitations.
Journal ArticleDOI

Electrooptical effects in silicon

TL;DR: In this article, a numerical Kramers-Kronig analysis is used to predict the refractive index perturbations produced in crystalline silicon by applied electric fields or by charge carriers.
Journal ArticleDOI

A high-speed silicon optical modulator based on a metal–oxide–semiconductor capacitor

TL;DR: An approach based on a metal–oxide–semiconductor (MOS) capacitor structure embedded in a silicon waveguide that can produce high-speed optical phase modulation is described and an all-silicon optical modulator with a modulation bandwidth exceeding 1 GHz is demonstrated.
Book ChapterDOI

Fiber Optic Communication Systems

TL;DR: Understanding fiber optic transmission systems requires a knowledge of the characteristics of optoelectronic transmitters and receivers, which do not differ much from traditional copper pairs (choice of analog to digital modulation, total attenuation, etc.).
Related Papers (5)