Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These

Phd by thesis

Supported metal nanostructures are the most widely used type of heterogeneous catalyst in industrial processes. The size of metal particles is a key factor in determining the performance of such catalysts. In particular, because low-coordinated metal atoms often function as the catalytically active sites, the specific activity per metal atom usually increases with decreasing size of the metal particles. However, the surface free energy of metals increases significantly with decreasing particle size, promoting aggregation of small clusters. Using an appropriate support material that strongly interacts with the metal species prevents this aggregation, creating stable, finely dispersed metal clusters with a high catalytic activity, an approach industry has used for a long time. Nevertheless, practical supported metal catalysts are inhomogeneous and usually consist of a mixture of sizes from nanoparticles to subnanometer clusters. Such heterogeneity not only reduces the metal atom efficiency but also frequent...

Single-atom catalysts: a new frontier in heterogeneous catalysis.

Hollow micro-/nanostructures are of great interest in many current and emerging areas of technology. Perhaps the best-known example of the former is the use of fly-ash hollow particles generated from coal power plants as partial replacement for Portland cement, to produce concrete with enhanced strength and durability. This review is devoted to the progress made in the last decade in synthesis and applications of hollow micro-/nanostructures. We present a comprehensive overview of synthetic strategies for hollow structures. These strategies are broadly categorized into four themes, which include well-established approaches, such as conventional hard-templating and soft-templating methods, as well as newly emerging methods based on sacrificial templating and template-free synthesis. Success in each has inspired multiple variations that continue to drive the rapid evolution of the field. The Review therefore focuses on the fundamentals of each process, pointing out advantages and disadvantages where appropriate. Strategies for generating more complex hollow structures, such as rattle-type and nonspherical hollow structures, are also discussed. Applications of hollow structures in lithium batteries, catalysis and sensing, and biomedical applications are reviewed.

Hollow Micro-/Nanostructures: Synthesis and Applications**

As the field of nanomedicine emerges, there is a lag in research surrounding the topic of nanoparticle (NP) toxicity, particularly concerned with mechanisms of action. The continuous emergence of bacterial resistance has challenged the research community to develop novel antibiotic agents. Metal NPs are among the most promising of these because show strong antibacterial activity. This review summarizes and discusses proposed mechanisms of antibacterial action of different metal NPs. These mechanisms of bacterial killing include the production of reactive oxygen species, cation release, biomolecule damages, ATP depletion, and membrane interaction. Finally, a comprehensive analysis of the effects of NPs on the regulation of genes and proteins (transcriptomic and proteomic) profiles is discussed.

https://link.springer.com/content/pdf/10.1186/s12951-017-0308-z.pdf

Metal nanoparticles: understanding the mechanisms behind antibacterial activity.

It is well known that urbanization and industrialization have resulted in the rapidly increasing emissions of volatile organic compounds (VOCs), which are a major contributor to the formation of secondary pollutants (e.g., tropospheric ozone, PAN (peroxyacetyl nitrate), and secondary organic aerosols) and photochemical smog. The emission of these pollutants has led to a large decline in air quality in numerous regions around the world, which has ultimately led to concerns regarding their impact on human health and general well-being. Catalytic oxidation is regarded as one of the most promising strategies for VOC removal from industrial waste streams. This Review systematically documents the progresses and developments made in the understanding and design of heterogeneous catalysts for VOC oxidation over the past two decades. It addresses in detail how catalytic performance is often drastically affected by the pollutant sources and reaction conditions. It also highlights the primary routes for catalyst deactivation and discusses protocols for their subsequent reactivation. Kinetic models and proposed oxidation mechanisms for representative VOCs are also provided. Typical catalytic reactors and oxidizers for industrial VOC destruction are further discussed. We believe that this Review will provide a great foundation and reference point for future design and development in this field.

/pdf/recent-advances-in-the-catalytic-oxidation-of-volatile-zw2c35dbg7.pdf

Recent Advances in the Catalytic Oxidation of Volatile Organic Compounds: A Review Based on Pollutant Sorts and Sources.

The performance of Ce-OMS-2 catalysts was improved by tuning the fill percentage in the hydrothermal synthesis process to increase the oxygen vacancy density. The Ce-OMS-2 samples were prepared with different fill percentages by means of a hydrothermal approach (i.e. 80%, 70%, 50% and 30%). Ce-OMS-2 with 80% fill percentage (Ce-OMS-2-80%) showed ozone conversion of 97%, and a lifetime experiment carried out for more than 20 days showed that the activity of the catalyst still remained satisfactorily high (91%). For Ce-OMS-2-80%, Mn ions in the framework as well as K ions in the tunnel sites were replaced by Ce4+, while for the others only Mn ions were replaced. O2-TPD and H2-TPR measurements proved that the Ce-OMS-2-80% catalyst possessed the greatest number of mobile surface oxygen species. XPS and XAFS showed that increasing the fill percentage can reduce the AOS of Mn and augment the amount of oxygen vacancies. The active sites, which accelerate the elimination of O3, can be enriched by increasing the oxygen vacancies. These findings indicate that increasing ozone removal can be achieved by tuning the fill percentage in the hydrothermal synthesis process.

Tuning the fill percentage in the hydrothermal synthesis process to increase catalyst performance for ozone decomposition.

The adsorption and desorption of N2O on main-group ion-exchanged ZSM-5 was studied using temperature-programmed desorption (TPD) and density functional theory (DFT) calculations. TPD experiments were carried out to determine the desorbed temperature Tmax corresponding to the maximum mass intensity of N2O desorption peak and adsorption capacity of N2O on metal-ion-exchanged ZSM-5s. The results indicated that Tmax followed a sequence of Ba2+ > Ca2+ > Cs+ > K+ > Na+ > Mg2+ and the amount of adsorbed N2O on main-group metal cation followed a sequence of Ba2+ > Mg2+ > Ca2+ > Na+ > K+ > Cs+. The DFT calculations were performed to obtain the adsorption energy (Eads), which represents the strength of the interaction between metal cations and the N-end or O-end of N2O. The calculation results showed that the N-end of the N2O molecule was favorably adsorbed on ion-exchanged ZSM-5, except for Cs-ZSM-5. For alkali metal cations, the Eads of N2O on cations followed the order which was the same to that of Tmax: Cs+ > K+ > Na+. The calculated and experimental results consistently showed that the adsorption performances of alkaline-earth metal cations were better than those of alkali metal cations.

Experimental and density functional theory study of the adsorption of N2O on ion-exchanged ZSM-5: Part II. The adsorption of N2O on main-group ion-exchanged ZSM-5

Interaction between Noble Metals (Pt, Pd, Rh, IR, Ag) and Defect-Enriched Tio2 and its Application in Toluene and Propene Catalytic Oxidation

Adsorption is an efficient method for atmospheric NOx abatement under ambient conditions; however, traditional adsorbents suffer from limited adsorption capacity and byproduct formation. Developing a low-cost material with high capacity for atmospheric NO2 elimination remains a challenge. Here, we synthesized a nanodispersed Mn3O4/γ-Al2O3 (Mn/Al) material that exhibits excellent ability to remove NO2. The 10 wt % Mn/Al sample showed the highest removal capacity, with 247.6 mgNO2/gMn/Al, which is superior to that of activated carbon (42.6 mgNO2/g). There were no byproducts produced when Mn/Al was tested with ppb-level NO2. The NO2 abatement mechanism with Mn/Al is different from physisorption or chemisorption. NO2 removal is mainly a catalytic process in air, during which surface hydroxyls and lattice oxygen are involved in the oxidation of NO2 to nitrate. In contrast, a chemical reaction between Mn3+ and NO2 is dominant in N2, where Mn3+ is converted into Mn4+ and NO2 is reduced to nitrite. Washing with deionized water is an effective and convenient method for the regeneration of saturated Mn/Al, and an 86% adsorption capacity was recovered after one washing. The results suggest that this low-cost Mn/Al material with easy preparation and regeneration is a promising candidate material for atmospheric NO2 elimination.

Changbin Zhang

Papers

Tuning the fill percentage in the hydrothermal synthesis process to increase catalyst performance for ozone decomposition.

Experimental and density functional theory study of the adsorption of N2O on ion-exchanged ZSM-5: Part II. The adsorption of N2O on main-group ion-exchanged ZSM-5

Interaction between Noble Metals (Pt, Pd, Rh, IR, Ag) and Defect-Enriched Tio2 and its Application in Toluene and Propene Catalytic Oxidation

Nanodispersed Mn3O4/γ-Al2O3 for NO2 Elimination at Room Temperature.

Electrochemical oxidation of volatile organic compounds in all-solid cell at ambient temperature