Access to clean, affordable and reliable energy has been a cornerstone of the world's increasing prosperity and economic growth since the beginning of the industrial revolution. Our use of energy in the twenty–first century must also be sustainable. Solar and water–based energy generation, and engineering of microbes to produce biofuels are a few examples of the alternatives. This Perspective puts these opportunities into a larger context by relating them to a number of aspects in the transportation and electricity generation sectors. It also provides a snapshot of the current energy landscape and discusses several research and development opportunities and pathways that could lead to a prosperous, sustainable and secure energy future for the world.

Opportunities and challenges for a sustainable energy future

Overview of current development in electrical energy storage technologies and the application potential in power system operation

The fuel economy and all-electric range (AER) of hybrid electric vehicles (HEVs) are highly dependent on the onboard energy-storage system (ESS) of the vehicle. Energy-storage devices charge during low power demands and discharge during high power demands, acting as catalysts to provide energy boost. Batteries are the primary energy-storage devices in ground vehicles. Increasing the AER of vehicles by 15% almost doubles the incremental cost of the ESS. This is due to the fact that the ESS of HEVs requires higher peak power while preserving high energy density. Ultracapacitors (UCs) are the options with higher power densities in comparison with batteries. A hybrid ESS composed of batteries, UCs, and/or fuel cells (FCs) could be a more appropriate option for advanced hybrid vehicular ESSs. This paper presents state-of-the-art energy-storage topologies for HEVs and plug-in HEVs (PHEVs). Battery, UC, and FC technologies are discussed and compared in this paper. In addition, various hybrid ESSs that combine two or more storage devices are addressed.

Battery, Ultracapacitor, Fuel Cell, and Hybrid Energy Storage Systems for Electric, Hybrid Electric, Fuel Cell, and Plug-In Hybrid Electric Vehicles: State of the Art

Due to increasing concerns about global warming, greenhouse gas emissions, and the depletion of fossil fuels, the electric vehicles (EVs) receive massive popularity due to their performances and efficiencies in recent decades. EVs have already been widely accepted in the automotive industries considering the most promising replacements in reducing CO2 emissions and global environmental issues. Lithium-ion batteries have attained huge attention in EVs application due to their lucrative features such as lightweight, fast charging, high energy density, low self-discharge and long lifespan. This paper comprehensively reviews the lithium-ion battery state of charge (SOC) estimation and its management system towards the sustainable future EV applications. The significance of battery management system (BMS) employing lithium-ion batteries is presented, which can guarantee a reliable and safe operation and assess the battery SOC. The review identifies that the SOC is a crucial parameter as it signifies the remaining available energy in a battery that provides an idea about charging/discharging strategies and protect the battery from overcharging/over discharging. It is also observed that the SOC of the existing lithium-ion batteries have a good contribution to run the EVs safely and efficiently with their charging/discharging capabilities. However, they still have some challenges due to their complex electro-chemical reactions, performance degradation and lack of accuracy towards the enhancement of battery performance and life. The classification of the estimation methodologies to estimate SOC focusing with the estimation model/algorithm, benefits, drawbacks and estimation error are extensively reviewed. The review highlights many factors and challenges with possible recommendations for the development of BMS and estimation of SOC in next-generation EV applications. All the highlighted insights of this review will widen the increasing efforts towards the development of the advanced SOC estimation method and energy management system of lithium-ion battery for the future high-tech EV applications.

A review of lithium-ion battery state of charge estimation and management system in electric vehicle applications: Challenges and recommendations

Energy storage systems (ESSs) are enabling technologies for well-established and new applications such as power peak shaving, electric vehicles, integration of renewable energies, etc. This paper presents a review of ESSs for transport and grid applications, covering several aspects as the storage technology, the main applications, and the power converters used to operate some of the energy storage technologies. Special attention is given to the different applications, providing a deep description of the system and addressing the most suitable storage technology. The main objective of this paper is to introduce the subject and to give an updated reference to nonspecialist, academic, and engineers in the field of power electronics.

Energy Storage Systems for Transport and Grid Applications

In this paper, a new battery/ultracapacitor hybrid energy storage system (HESS) is proposed for electric drive vehicles including electric, hybrid electric, and plug-in hybrid electric vehicles. Compared to the conventional HESS design, which uses a larger dc/dc converter to interface between the ultracapacitor and the battery/dc link to satisfy the real-time peak power demands, the proposed design uses a much smaller dc/dc converter working as a controlled energy pump to maintain the voltage of the ultracapacitor at a value higher than the battery voltage for the most city driving conditions. The battery will only provide power directly when the ultracapacitor voltage drops below the battery voltage. Therefore, a relatively constant load profile is created for the battery. In addition, the battery is not used to directly harvest energy from the regenerative braking; thus, the battery is isolated from frequent charges, which will increase the life of the battery. Simulation and experimental results are presented to verify the proposed system.

A New Battery/UltraCapacitor Hybrid Energy Storage System for Electric, Hybrid, and Plug-In Hybrid Electric Vehicles

The fuel efficiency and performance of novel vehicles with electric propulsion capability are largely limited by the performance of the energy storage system (ESS). This paper reviews state-of-the-art ESSs in automotive applications. Battery technology options are considered in detail, with emphasis on methods of battery monitoring, managing, protecting, and balancing. Furthermore, other ESS candidates such as ultracapacitors, flywheels and fuel cells are also discussed. Finally, hybrid power sources are considered as a method of combining two or more energy storage devices to create a superior power source.

Energy Storage Systems for Automotive Applications

The trend toward more electric vehicles has demanded the need for high voltage, high efficiency and long life battery systems. A complete battery system consists of the following parts: protection, management and balancing. Of the three parts, balancing is the most important concerning the life of the battery system because without the balancing system, the individual cell voltages will drift apart over time. The capacity of the total pack will also decrease more quickly during operation which will result in the fail of the total battery system. This condition is especially severe when the battery has a long string of cells (high voltage battery systems) and frequent regenerative braking (charging) is done via the battery pack. This paper presents the theory behind the proposed balancing methods for battery systems within the past twenty years. Comparison between the methods is carried out and different balancing methods are grouped by their nature of balancing.

Battery balancing methods: A comprehensive review

In this letter, a new multiple-input (MI) hybrid energy conversion topology is presented. The proposed topology is capable of energy diversification among different energy sources with different voltage-current characteristics while achieving low part number and bidirectional operational. Compared to the earlier MI buck-boost converter, the proposed topology provides positive output voltage without any additional transformer, is capable of bidirectional operation, and has the capability of operating in buck, boost, and buck-boost modes separately. A fixed-frequency switching strategy is considered, and analytical analyses, detailed device-level simulation, and experimental results are presented.

A Multiple-Input DC–DC Converter Topology

To overcome the power delivery limitations of batteries and energy storage limitations of ultracapacitors, hybrid energy storage systems, which combine the two energy sources, have been proposed. A comprehensive review of the state of the art is presented. In addition, a method of optimizing the operation of a battery/ultracapacitor hybrid energy storage system (HESS) is presented. The goal is to set the state of charge of the ultracapacitor and the battery in a way which ensures that the available power and energy is sufficient to supply the drivetrain. By utilizing an algorithm where the states of charge of both systems are tightly controlled, we allow for the overall system size to reduce since more power is available from a smaller energy storage system.

Jian Cao

Papers

A New Battery/UltraCapacitor Hybrid Energy Storage System for Electric, Hybrid, and Plug-In Hybrid Electric Vehicles

Energy Storage Systems for Automotive Applications

Battery balancing methods: A comprehensive review

A Multiple-Input DC–DC Converter Topology

Power Management of an Ultracapacitor/Battery Hybrid Energy Storage System in an HEV