Graphene and other two-dimensional materials, such as transition metal dichalcogenides, have rapidly established themselves as intriguing building blocks for optoelectronic applications, with a strong focus on various photodetection platforms The versatility of these material systems enables their application in areas including ultrafast and ultrasensitive detection of light in the ultraviolet, visible, infrared and terahertz frequency ranges These detectors can be integrated with other photonic components based on the same material, as well as with silicon photonic and electronic technologies Here, we provide an overview and evaluation of state-of-the-art photodetectors based on graphene, other two-dimensional materials, and hybrid systems based on the combination of different two-dimensional crystals or of two-dimensional crystals and other (nano)materials, such as plasmonic nanoparticles, semiconductors, quantum dots, or their integration with (silicon) waveguides

http://www-g.eng.cam.ac.uk/nms/publications/pdf/nnano.2014.215.pdf

Photodetectors based on graphene, other two-dimensional materials and hybrid systems

We present the science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems, targeting an evolution in technology, that might lead to impacts and benefits reaching into most areas of society. This roadmap was developed within the framework of the European Graphene Flagship and outlines the main targets and research areas as best understood at the start of this ambitious project. We provide an overview of the key aspects of graphene and related materials (GRMs), ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries. We also define an extensive list of acronyms in an effort to standardize the nomenclature in this emerging field.

/pdf/science-and-technology-roadmap-for-graphene-related-two-4q9m7czlkc.pdf

Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems

The compelling demand for higher performance and lower power consumption in electronic systems is the main driving force of the electronics industry's quest for devices and/or architectures based on new materials. Here, we provide a review of electronic devices based on two-dimensional materials, outlining their potential as a technological option beyond scaled complementary metal-oxide-semiconductor switches. We focus on the performance limits and advantages of these materials and associated technologies, when exploited for both digital and analog applications, focusing on the main figures of merit needed to meet industry requirements. We also discuss the use of two-dimensional materials as an enabling factor for flexible electronics and provide our perspectives on future developments.

Electronics based on two-dimensional materials

Graphene, a single layer of carbon atoms in a honeycomb lattice, offers a number of fundamentally superior qualities that make it a promising material for a wide range of applications, particularly in electronic devices. Its unique form factor and exceptional physical properties have the potential to enable an entirely new generation of technologies beyond the limits of conventional materials. The extraordinarily high carrier mobility and saturation velocity can enable a fast switching speed for radio-frequency analog circuits. Unadulterated graphene is a semi-metal, incapable of a true off-state, which typically precludes its applications in digital logic electronics without bandgap engineering. The versatility of graphene-based devices goes beyond conventional transistor circuits and includes flexible and transparent electronics, optoelectronics, sensors, electromechanical systems, and energy technologies. Many challenges remain before this relatively new material becomes commercially viable, but laboratory prototypes have already shown the numerous advantages and novel functionality that graphene provides.

Graphene: An Emerging Electronic Material

The ultrafast relaxation and recombination dynamics of photogenerated electrons and holes in epitaxial graphene are studied using optical-pump Terahertz-probe spectroscopy. The conductivity in graphene at Terahertz frequencies depends on the carrier concentration as well as the carrier distribution in energy. Time-resolved studies of the conductivity can therefore be used to probe the dynamics associated with carrier intraband relaxation and interband recombination. We report the electron-hole recombination times in epitaxial graphene for the first time. Our results show that carrier cooling occurs on sub-picosecond time scales and that interband recombination times are carrier density dependent.

Ultrafast Optical-Pump Terahertz-Probe Spectroscopy of the Carrier Relaxation and Recombination Dynamics in Epitaxial Graphene

This paper reports on photodetection properties of the graphene-Si schottky junction by measuring current–voltage characteristics under 1.55- $\mu{\rm m}$ excitation laser. The measurements have been done on a junction fabricated by depositing mechanically exfoliated natural graphite on top of the pre-patterned silicon substrate. The electrical Schottky barrier height is estimated to be (0.44–0.47) eV with a minimum responsivity of 2.8 mA/W corresponding to an internal quantum efficiency of 10%, which is almost an order of magnitude larger than regular Schottky junctions. A possible explanation for the large quantum efficiency related to the 2-D nature of graphene is discussed. Large quantum efficiency, room temperature IR detection, ease of fabrication along with compatibility with Si devices can open a doorway for novel graphene-based photodetectors.

Graphene-Si Schottky IR Detector

We demonstrate a subharmonic resistive graphene FET mixer utilizing the symmetrical channel-resistance versus gate-voltage characteristic. A down-conversion loss of 24 dB is obtained with fRF = 2 GHz, fLO= 1.01 GHz, and fIF= 20 MHz in a 50- Ω-impedance system. Unlike conventional subharmonic resistive FET mixers, this type of mixer operates with only one transistor and does not need any balun at the local oscillator (LO) port, which makes it more compact.

https://publications.lib.chalmers.se/records/fulltext/local_146694.pdf

A Subharmonic Graphene FET Mixer

We propose a semi-empirical graphene field-effect-transistor (G-FET) model for analysis and design of G-FET-based circuits The model describes the current-voltage characteristic for a G-FET over a wide range of operating conditions The gate bias dependence of the output power spectrum is studied and compared with the simulated values Good agreement between the simulated and the experimental power spectrums up to the third harmonic is demonstrated, which confirms the model validity Moreover, S-parameter measurements essentially coincide with the results obtained from the simulation The model contains a small set of fitting parameters, which can be straightforwardly extracted from S-parameters and dc measurements The developed extraction method gives a more accurate estimation of the drain and source contact resistances compared with other approaches As a design example, we use a harmonic balance load-pull approach to extract optimum embedding impedance values for a subharmonic G-FET mixer

http://publications.lib.chalmers.se/records/fulltext/local_151329.pdf

A Large-Signal Graphene FET Model

A 30-GHz integrated subharmonic mixer based on a single graphene field-effect transistor (G-FET) has been designed, fabricated, and characterized. The mixer is realized in microstrip technology on a 250- μm-high-resistivity silicon substrate. In order to enhance the current on-off ratio, the G-FET utilizes a channel consisting of an array of bow-tie structured graphene, yielding a current on-off ratio of 7. A conversion loss (CL) of 19 ± 1 dB over the frequency range of 24-31 GHz is obtained with a local oscillator (LO) to RF isolation better than 20 dB at an LO power of 10 dBm. The overall minimum CL is 18 dB at 27 GHz. The mixer has a 3 GHz ± 1-dB IF bandwidth, which is achieved with a fixed LO signal of 15 GHz. The mixer linearity is characterized and the highest third-order intercept point is measured to be 12.8 dBm.

https://publications.lib.chalmers.se/records/fulltext/169312/local_169312.pdf

A 30-GHz Integrated Subharmonic Mixer Based on a Multichannel Graphene FET

Reported is the realisation of a graphene FET microwave amplifier operating at 1 GHz, exhibiting a small-signal power gain of 10 dB and a noise figure of 6.4 dB. The amplifier utilises a matching inductor on the gate yielding a return loss of 20 dB. The design is optimised for maximum gain and the optimum noise figure is extracted by noise modelling and predicted to be close to 1 dB for the intrinsic graphene FET at this frequency. The presented results complement existing graphene FET applications and are promising for future graphene microwave circuits.

http://publications.lib.chalmers.se/records/fulltext/local_160131.pdf

Omid Habibpour

Papers

Graphene-Si Schottky IR Detector

A Subharmonic Graphene FET Mixer

A Large-Signal Graphene FET Model

A 30-GHz Integrated Subharmonic Mixer Based on a Multichannel Graphene FET

10 dB small-signal graphene FET amplifier