Diamond-like carbon (DLC) is a metastable form of amorphous carbon with significant sp3 bonding. DLC is a semiconductor with a high mechanical hardness, chemical inertness, and optical transparency. This review will describe the deposition methods, deposition mechanisms, characterisation methods, electronic structure, gap states, defects, doping, luminescence, field emission, mechanical properties and some applications of DLCs. The films have widespread applications as protective coatings in areas, such as magnetic storage disks, optical windows and micro-electromechanical devices (MEMs).

/pdf/diamond-like-amorphous-carbon-3pczopr0z7.pdf

Diamond-like amorphous carbon

Electrical current can be completely spin polarized in a class of materials known as half-metals, as a result of the coexistence of metallic nature for electrons with one spin orientation and insulating nature for electrons with the other. Such asymmetric electronic states for the different spins have been predicted for some ferromagnetic metals--for example, the Heusler compounds--and were first observed in a manganese perovskite. In view of the potential for use of this property in realizing spin-based electronics, substantial efforts have been made to search for half-metallic materials. However, organic materials have hardly been investigated in this context even though carbon-based nanostructures hold significant promise for future electronic devices. Here we predict half-metallicity in nanometre-scale graphene ribbons by using first-principles calculations. We show that this phenomenon is realizable if in-plane homogeneous electric fields are applied across the zigzag-shaped edges of the graphene nanoribbons, and that their magnetic properties can be controlled by the external electric fields. The results are not only of scientific interest in the interplay between electric fields and electronic spin degree of freedom in solids but may also open a new path to explore spintronics at the nanometre scale, based on graphene.

https://arxiv.org/pdf/cond-mat/0611600.pdf

Half-metallic graphene nanoribbons

The last decade witnessed significant progress in angle-resolved photoemission spectroscopy (ARPES) and its applications. Today, ARPES experiments with 2-meV energy resolution and $0.2\ifmmode^\circ\else\textdegree\fi{}$ angular resolution are a reality even for photoemission on solids. These technological advances and the improved sample quality have enabled ARPES to emerge as a leading tool in the investigation of the high-${T}_{c}$ superconductors. This paper reviews the most recent ARPES results on the cuprate superconductors and their insulating parent and sister compounds, with the purpose of providing an updated summary of the extensive literature. The low-energy excitations are discussed with emphasis on some of the most relevant issues, such as the Fermi surface and remnant Fermi surface, the superconducting gap, the pseudogap and $d$-wave-like dispersion, evidence of electronic inhomogeneity and nanoscale phase separation, the emergence of coherent quasiparticles through the superconducting transition, and many-body effects in the one-particle spectral function due to the interaction of the charge with magnetic and/or lattice degrees of freedom. Given the dynamic nature of the field, we chose to focus mainly on reviewing the experimental data, as on the experimental side a general consensus has been reached, whereas interpretations and related theoretical models can vary significantly. The first part of the paper introduces photoemission spectroscopy in the context of strongly interacting systems, along with an update on the state-of-the-art instrumentation. The second part provides an overview of the scientific issues relevant to the investigation of the low-energy electronic structure by ARPES. The rest of the paper is devoted to the experimental results from the cuprates, and the discussion is organized along conceptual lines: normal-state electronic structure, interlayer interaction, superconducting gap, coherent superconducting peak, pseudogap, electron self-energy, and collective modes. Within each topic, ARPES data from the various copper oxides are presented.

https://arxiv.org/pdf/cond-mat/0208504.pdf

Angle-resolved photoemission studies of the cuprate superconductors

Nanoscale metal/oxide/metal switches have the potential to transform the market for nonvolatile memory and could lead to novel forms of computing. However, progress has been delayed by difficulties in understanding and controlling the coupled electronic and ionic phenomena that dominate the behaviour of nanoscale oxide devices. An analytic theory of the ‘memristor’ (memory-resistor) was first developed from fundamental symmetry arguments in 1971, and we recently showed that memristor behaviour can naturally explain such coupled electron–ion dynamics. Here we provide experimental evidence to support this general model of memristive electrical switching in oxide systems. We have built micro- and nanoscale TiO2 junction devices with platinum electrodes that exhibit fast bipolar nonvolatile switching. We demonstrate that switching involves changes to the electronic barrier at the Pt/TiO2 interface due to the drift of positively charged oxygen vacancies under an applied electric field. Vacancy drift towards the interface creates conducting channels that shunt, or short-circuit, the electronic barrier to switch ON. The drift of vacancies away from the interface annilihilates such channels, recovering the electronic barrier to switch OFF. Using this model we have built TiO2 crosspoints with engineered oxygen vacancy profiles that predictively control the switching polarity and conductance. Nanoscale metal/oxide/metal devices that are capable of fast non-volatile switching have been built from platinum and titanium dioxide. The devices could have applications in ultrahigh density memory cells and novel forms of computing.

Memristive switching mechanism for metal/oxide/metal nanodevices.

A large amount of work world-wide has been directed towards obtaining an understanding of the fundamental characteristics of porous Si. Much progress has been made following the demonstration in 1990 that highly porous material could emit very efficient visible photoluminescence at room temperature. Since that time, all features of the structural, optical and electronic properties of the material have been subjected to in-depth scrutiny. It is the purpose of the present review to survey the work which has been carried out and to detail the level of understanding which has been attained. The key importance of crystalline Si nanostructures in determining the behaviour of porous Si is highlighted. The fabrication of solid-state electroluminescent devices is a prominent goal of many studies and the impressive progress in this area is described.

The structural and luminescence properties of porous silicon

The electronic structure of crystalline CoSi 2 produced by ion-beam synthesis has been studied. Using fluorescence spectroscopies, we have taken advantage of the large photon penetration depth to obtain information from silicide layers, buried several hundred Angstroms deep in Si wafers, prepared by ion-beam synthesis. The unoccupied local Co d density of states (DOS) was determined via the Co L 3 nearedge absorption spectrum, measured in the fluorescence-yield mode. The occupied local Co d DOS was determined via the Co L 3 emission spectrum, excited both with photons and with high-energy electrons

Electronic-structure determination of ion-beam-synthesized CoSi2 using photon-in-photon-out spectroscopies.

Digitally printed conductive structures often need to be electrically connected to batteries, microcontrollers, or other devices. A consensus of industry and research is that such hybrid printed electronics will play a major part in the future of printed electronics. To promote the technology of hybrid printed electronics, surface mount technologies for electronic components using isotropic conductive adhesives (ICAs) and low melting tin bismuth solders on inkjet-printed silver structures on injection molded liquid crystal polymer (LCP) substrates were investigated in this publication. The special needs for inkjet-printed electronics were considered as well as the reliability of assembled surface mounted devices (SMDs) and their failure mechanisms. Connected 0603 and 1206 SMD components achieved a characteristic fatigue life of more than 3500 cycles during thermal cycling at +125 °C/−40 °C and withstood over 1000 h under a damp-heat atmosphere of +85 °C/85% RH. The coefficient of thermal expansion (CTE) of the substrate and the selection of solder have major impacts on the reliability of the assemblies.

Wolfgang Eberhardt

Papers

Electronic-structure determination of ion-beam-synthesized CoSi2 using photon-in-photon-out spectroscopies.

Contacting Inkjet-Printed Silver Structures and SMD by ICA and Solder

Core level photoionization—decay coincidence spectroscopy of free molecules

Growth and magnetic behavior of Pd on Fe(100)

Core hole screening and lifetimes in adsorbates on metallic surfaces