Showing papers by "Alcatel-Lucent published in 1994"

Proton transfer in solution: Molecular dynamics with quantum transitions

Abstract: We apply ‘‘molecular dynamics with quantum transitions’’ (MDQT), a surface‐hopping method previously used only for electronic transitions, to proton transfer in solution, where the quantum particle is an atom. We use full classical mechanical molecular dynamics for the heavy atom degrees of freedom, including the solvent molecules, and treat the hydrogen motion quantum mechanically. We identify new obstacles that arise in this application of MDQT and present methods for overcoming them. We implement these new methods to demonstrate that application of MDQT to proton transfer in solution is computationally feasible and appears capable of accurately incorporating quantum mechanical phenomena such as tunneling and isotope effects. As an initial application of the method, we employ a model used previously by Azzouz and Borgis to represent the proton transfer reaction AH–B■A−–H+B in liquid methyl chloride, where the AH–B complex corresponds to a typical phenol–amine complex. We have chosen this model, in part, because it exhibits both adiabatic and diabatic behavior, thereby offering a stringent test of the theory. MDQT proves capable of treating both limits, as well as the intermediate regime. Up to four quantum states were included in this simulation, and the method can easily be extended to include additional excited states, so it can be applied to a wide range of processes, such as photoassisted tunneling. In addition, this method is not perturbative, so trajectories can be continued after the barrier is crossed to follow the subsequent dynamics.

Multimedia service access by reading marks on an object

Abstract: An apparatus and method enables a user to control the selection of electronic multimedia services to be provided to the user by one or more servers over a communication medium. The apparatus includes a scanner for reading marks on an object and for communicating a request signal, having an object code representing the read marks, to a user interface. The interface receives the request signal and transmits to the servers a request command including an interface identification code and the object code which is used to select the desired electronic multimedia service. The servers identify the selected electronic multimedia service using the object code. The interface then enables the selected electronic multimedia service transmitted from the servers to be received by the user's receiver.

Comparison of classifier methods: a case study in handwritten digit recognition

Abstract: This paper compares the performance of several classifier algorithms on a standard database of handwritten digits. We consider not only raw accuracy, but also training time, recognition time, and memory requirements. When available, we report measurements of the fraction of patterns that must be rejected so that the remaining patterns have misclassification rates less than a given threshold.

Smart card with multiple charge accounts and product item tables designating the account to debit

Abstract: Systems and methods are disclosed wherein a single set of consumer items may be purchased by debiting any of a plurality of accounts stored on a smart card. According to an embodiment disclosed herein, a point-of-sale terminal includes a terminal processor, an item identification device, a terminal memory, and a smart card reader. The item identification device may include a conventional UPC bar code reader adapted to read UPC bar codes on consumer items. A cost table and a plurality of item tables are electronically stored in terminal memory. The cost table associates each item identifier (UPC bar code) with a corresponding cost. Each item table contains a list of item identifiers, and may optionally associate specific item identifiers with corresponding accounts. Each item table is uniquely identified using an item table identifier. The terminal memory, item identification device, and smart card reader are all coupled to the terminal processor. A smart card is equipped with smart card memory for storing a plurality of data files, and a smart card processor adapted to execute a software operating system for managing the plurality of data files. Each data file associates an account identifier for uniquely specifying a given account with an account balance and at least one item table identifier. Accounts are implemented, for example, by service providers such as Visa, MasterCard, Discover, ATM networks, food stamp programs, other types of welfare programs, unemployment compensation, or the like.

Motion and structure from feature correspondences: a review

Abstract: We present a review of algorithms and their performance for determining three-dimensional (3D) motion and structure of rigid objects when their corresponding features are known at different times or are viewed by different cameras. Three categories of problems are considered, depending upon whether the features are two (2D) or three-dimensional (3D) and the type of correspondence: a) 3D to 3D (i.e., locations of corresponding features in 3D space are known at two different times), b) 2D to 3D (i.e., locations of features in 3D space and their projection on the camera plane are known, and c) 2D to 2D (i.e., projections of features on the camera plane are known at two different times). Features considered include points, straight lines, curved lines, and corners. Emphasis is on problem formulation, efficient algorithms for solution, existence and uniqueness of solutions, and sensitivity of solutions to noise in the observed data. Algorithms described have been used in a variety of applications. Some of these are: a) positioning and navigating 3D objects in a 3D world, b) camera calibration, i.e., determining location and orientation of a camera by observing 3D features whose location is known, c) estimating motion and structure of moving objects relative to a camera. We mention some of the mathematical techniques borrowed from algebraic geometry, projective geometry, and homotopy theory that are required to solve these problems, list unsolved problems, and give some directions for future research. >

TTP/spl minus/a protocol for fault-tolerant real-time systems

Abstract: The Time-Triggered Protocol integrates such services as predictable message transmission, clock synchronization, membership, mode change, and blackout handling. It also supports replicated nodes and replicated communication channels. The authors describe their architectural assumptions, fault hypothesis, and objectives for the TTP protocol. After they elaborate on its rationale, they give a detailed protocol description. They also discuss TTP characteristics and compare its performance with that of other protocols proposed for control applications. >

Superconductivity at 23 K in yttrium palladium boride carbide

Abstract: COPPER oxide compounds have dominated superconductivity research since 1986 because of their very high transition temperatures (Tcs). In contrast, no new families of high-Tc intermetallic compounds have been discovered since the A15-type Nb3X compounds were first reported in 19531. The intermetallies with highest Jcs have all been based on niobium, with the highest Tcs being 20.7 K for bulk Nb3Ga and 23.2 K for sputtered films of Nb3Ge (refs 2, 3). Here we report the observation of superconductivity at 23 K in a multiple-phase bulk sample of a quaternary intermetallic, yttrium palladium boride carbide. This is higher than any Tc reported previously for a bulk intermetallic compound. Although the materials are not yet single-phase, the superconducting volume fraction is large. We propose that this compound may represent the first of a new family of superconducting intermetallics with relatively high Tcs.

Wireless data communication system having power saving function

Abstract: A wireless data communication system is operable in a power saving mode wherein stations are synchronized to be in an awake state to receive synchronizing messages (TIM, PSYNC) and traffic indicator information and are changed to a doze state if they are not to receive data messages. In one embodiment all stations ( 20 ) communicate via a base station access point ( 16 ), which broadcasts synchronizing messages (TIM) at regular intervals identifying stations ( 20 ) that are to receive data messages. In another embodiment all stations ( 220 ) communicate directly with one another, one station assumes the role of a master station and broadcasts synchronizing messages (PSYNC), and stations ( 220 ) desiring to transmit data messages transmit traffic indicator messages (PTIM) to the appropriate destination stations ( 220 ), in a synchronized awake period just before the next synchronizing message (PSYNC) is expected to arrive.

Wireless information system for acquiring location related information

Abstract: An information system for automatically providing mobile vehicles with information related to their geographical location and to provide routing control information downloaded from a broadcasting or directed cellular call source includes a GPS receiver and associated data storage unit. A cellular packet data receiver is included to receive data with location markers from a transmission source. The data from the data storage unit and the received data with location markers is coupled to a controller module which includes stored program controls to select data relevant to the present geographical location and to provide centralized alerts and local readout in the mobile vehicle of this information.

Smart card for automatic financial records

Abstract: A smart card that allows for the categorization of expenses at the time they are incurred and the automatic generation and storage of information concerning the date, payee, and amount of the transaction. A single smart card is utilized to record and categorize transactions as they occur by transaction identities. These transaction identities are business or personal classification, cash, check, or credit card type transactions, and expense categories. The smart card has a alphanumeric display and a keyboard for selecting the class, type, and category. These items are selected by the entry of numbers on the keyboard but textual information is displayed to identify these items in response to the entered numbers. A program in a personal computer is used to specify the class, type, and categories along with the textual information in the smart card via a smart card reader. These specifications correspond to a spreadsheet that has been entered on the personal computer by the user of the smart card. The personal computer loads the textual information defining the class, type, and category into the smart card so that it corresponds to the titles of the entries on the spreadsheet.

Direct view display based on a micromechanical modulation

Abstract: A direct-view display comprising an array of micro-mechanical modulators is disclosed, he modulator used to form the display comprises a suspended, vertically moving membrane and a substrate. The device functions based on optical interference effects between the membrane and the substrate which cause the modulator to either substantially reflect or absorb an optical signal. The interference effects are a function of the size of the air gap between the membrane and substrate, which varies as the membrane moves. The membrane moves in response to a data signal, representative of an image, delivered to the modulator. The display generates an image based on the pattern of light and dark sections of the display corresponding to the reflectivity of each modulator at a given point in time.

Query Optimization by Predicate Move-Around

Abstract: Query optimization which is done by making a graph of the query and moving predicates around in the graph so that they will be applied early in the optimized query generated from the graph. Predicates are first propagated up from child nodes of the graph to parent nodes and then down into different child nodes. After the predicates have been moved, redundant predicates are detected and removed. Predicates are moved through aggregation operations and new predicates are deduced from aggregation operations and from functional dependencies. The optimization is not dependent on join order and works where nodes of the graph cannot be merged.

An interactive system for communications between a cordless telephone and a remotely operated device

Abstract: An interactive communication system includes a portable unit of a cordless telephone for providing wireless telephone communications and integrating telephone functions and control of remotely operated devices, such as television sets, video cassette recorders and cable converters. The portable unit advantageously provides controlling information to a remotely operated device in response to voice and data communications occurring over the telephone network.

Mobile-radio network with debit accounts

Abstract: A mobile-radio network (MRS) includes a mobile switching center (MSC) for receiving incoming calls from mobile-radio subscribers (A). In response to the incoming calls, certain ones of the incoming calls are selected if the respective mobile-radio subscriber (A) has a debit account assigned to it and the debit account has a credit balance. The credit balance is compared with a predetermined minimum balance (Dmin1) and a call is completed if the credit balance exceeds the predetermined minimum balance. The debit account for the respective mobile-radio subscriber is charged a unit fee. Incorporated in the mobile switching center (MSC) is a service switching point (SSP). Additionally, a service control point (SCP) is connected to the service switching point and includes an arithmetic unit (DC) for call charging. The mobile-radio network structure makes it possible to establish connections and charge incoming calls using simple exchange protocols (INAP) without having to change conventional network protocols (MAP).

Interactive video on demand

Abstract: Video on demand (VOD)/spl minus/likely to become one of the most successful services in the emerging broadband network/spl minus/must minimize bandwidth requirements to serve large numbers of users. This article describes two VOD service variants, whereby bandwidth requirements in the network are reduced, while keeping the quality of service (QoS) at an equally high level. >

Software pay per use system

Abstract: A pay per use system for the prevention of the unauthorized use of computer software. An encryption program encodes original software to produce secured software. The encoding is accomplished by using cryptographic techniques. In order to use the software, a user must call a telephone number to receive the cryptographic keys necessary to decrypt the secured software. Thus, users must pay for each use of the secured software. The system allows software developers to freely distribute the secured software. Copies of the secured software may be freely made, because payment is based on each use of the software not on each copy of the software.

Hand-held radiotelephone with video transmission and display

Abstract: A radiotelephone device has a telephone handset-shaped housing for hand-held operation. The device includes electroacoustic transducers mounted at sound apertures in the housing, a keypad mounted between the apertures, and electronic circuitry. Video communication is accomplished by a video camera mounted in the housing and connected with the electronic circuitry and a liquid crystal display device mounted in the housing and connected to the electronic circuitry. Thus a radiotelephone is equipped with a video pickup device and a video display device.

Control of vertical-cavity laser polarization with anisotropic transverse cavity geometries

Abstract: We show the two-fold polarization degeneracy of etched air-post vertical-cavity surface emitting laser diodes can be lifted and a dominant polarization state selected through use of anisotropic transverse laser cavity geometries. For lasers with rhombus-shaped cavities, fundamental mode lasing emission linearly polarized along one specified crystal axis is obtained up to twice the threshold current. For dumbbell-shaped lasers, fundamental mode lasing emission linearly polarized along one specified crystal axis is maintained over the entire operating range of the device producing a maximum orthogonal polarization suppression ratio of 14 dB. >

Application program interface

Abstract: An application program interface for integrated services digital networks is implemented so that application programs can be generated independently of network protocols (Layer 1, 2; 1TR6, VN2) and independently of the respective implementation of service features. The application program interface contains for each network service an independent service program module (Telephony, FAX, Packet data, Teletex, . . . ) with a message set representing procedures as specified by standards (CCITT, ETSI, . . . ).

Facility for detecting intruders and suspect callers in a computer installation and a security system including such a facility

Abstract: A facility for detecting intrusions and suspect users in a computer installation, and a security system incorporating such a facility that makes use of surveillance data relating to the operation of the installation. The facility includes elements for modelling the computer installation, its users, and their respective behavior with the help of a semantic network; elements for comparing the modellized behavior of the system and of its users relative to modellized normal behavior; elements for interpreting observed anomalies in terms of intrusions and of intrusion hypothesis; elements for interpreting observed intrusion hypotheses and intrusions in order to indicate them and enable restraint actions to be prepared. Elements are provided to evaluate the degree of suspicion of users. The elements co-operate with one another for the purpose of providing information.

Video on demand network, including a central video server and distributed video servers with random access read/write memories

Abstract: A video on demand network (VODN), transmits video signals (VS) to user stations (US11, . . . , US2N) pursuant to the receipt of control signals (CS) issued by these user stations. In order to optimize the retrieval costs, this video on demand network maintains a large video library in a central video server (CS) and stores locally popular video signals in a plurality of local distributed video servers (DS1/2) from which the latter video signals are transmitted to the user stations. The video signals provided by the local distributed servers are updated from the central server based upon the changing popularity of the video signals. The present invention proposes in particular to store the video signals in the local distributed servers in random access read/write memories (HDA), e.g., electronic RAMs, magnetic or optical disks, and/or the like, from which the video signals can flexibly be supplied on-line to the user stations and to store the video signals in the central server in sequential access memories, e.g. Digital Audio Tapes (DAT) and CD-ROMs (CDR), providing cheap mass storage.

Color variation with electroluminescent organic semiconductors in multimode resonant cavities

Abstract: The range of possibilities in controlling the color of an organic semiconductor based light emitter diode (LED) by incorporating the active layers in a multimode Fabry–Perot cavity is demonstrated. The combination of carefully designed multimode microcavities and electroluminescent organic semiconductors makes possible the realization of mixed colors such as white, purple, etc. with a single LED. The parameters affecting the color include the total optical thickness of the device and the position of the electromagnetic‐field antinodes with respect to the location of the emitting dipoles. The electrical characteristics and quantum efficiency of such devices are also reported.

Microcavity effects in organic semiconductors

Abstract: Microcavity structures containing hydroxyquinoline aluminum and diamine layers commonly used in electroluminescent devices are described. We show that it is possible to obtain emission at red, green, and blue wavelengths by changing the thickness of a polyimide filler layer in the cavity. The angular dependence of the emission wavelength and linewidth are reported and the implications for organic electroluminescent color displays are discussed.

Scalable encoding and decoding of high-resolution progressive video

Abstract: High-resolution, progressive format video signals (on C3100) having high frame rates may be encoded by a base layer encoder (C3140) and an enhancement layer encoder (C3180) to provide two kinds of encoded video signals which share a common output channel (C3260). These encoded video signals are received at an input (C3270) of a video receiver which may use one or both of the two kinds of encoded video signal. Relatively lower performance high-definition televisions may thus receive video signals from higher performance transmitters and produce satisfactory pictures. Higher performance HDTVs will be able to utilize the full performance capabilities of these video signals.

Low loss synchronous rectifier for application to clamped-mode power converters

Abstract: A synchronous rectifier for use with a clamped-mode power converter uses in one embodiment a hybrid rectifier with a MOSFET rectifying device active in one first cyclic interval of the conduction/nonconduction sequence of the power switch and a second rectifying device embodied in one illustrative embodiment as a low voltage bipolar diode rectifying device active during an alternative interval to the first conduction/nonconduction interval. The gate drive to the MOSFET device is continuous at a constant level for substantially all of the second interval which enhances efficiency of the rectifier. The bipolar rectifier device may also be embodied as a MOSFET device. The subject rectifier may be used in both forward and flyback power converters.

Categorization of purchased items for each transaction by a smart card

Abstract: A smart card that is responsive to a list of items with individual prices that are received from a point of sale (POS) terminal during an individual transaction to automatically insert these items into expense categories. A personal computer later retrieves these categories and associated information and inserts the information into a spreadsheet. The microprocessor in the smart card relies on stored tables defining commonly used item designations and a table that defines definitions based on an ongoing learning process by the microprocessor in conjunction with the personal computer.

Interactive control system for multiservice installations including a television program distribution server and a PABX

Abstract: A system for interactive control of applications by users to whom information can be communicated by televisions in a multiservice installation includes a television program distribution server, user modules, a PABX, and an operating system. The television program distribution server (4) has means (12,13) for transmitting television programs. The user modules (6) each include a telephone (2) with a control device connected to the PABX and a television (5) served by the server. The PABX (1) has a control and management system for controlling the individual connection of the television to the server in connection with first coded signals sent by the user through the control device of the telephone included in the same user module. The operating system includes an interactive television program from a computer and a device for producing control information usable by man or by machine from information transmitted by the PABX control and management system on reception of second coded signals sent through the control device included in the telephone in relation to specific interactive program information transmitted from the operating system and then sent to and displayed on the television of the same user module.

Mesoscopic self‐assembly of gold islands on diblock‐copolymer films

Abstract: We describe the fabrication and characterization of self‐assembled gold island arrays on diblock‐copolymer thin films. The natural tendency of these polymers to form ordered phases is used to induce selective aggregation of evaporated gold metal during an annealing process. We obtain well‐defined, nanoscale island arrays aligned with one of the copolymer blocks. Near perfect segregation is achieved between the two domains. Two types of diblock‐copolymer systems are discussed, together with the resulting island patterns.

System for composing multimedia signals for interactive television services.

Abstract: A system for composing multimedia signals from various source signals, such as still-frame video signals, full motion video signals and audio signals includes a plurality of composing units, each of which is capable of composing a multimedia signal from selected source signals. One of such composing units is assigned for each multimedia signal to be composed. Each composing unit accepts parameters specifying various properties for each element of the multimedia signal, such as size, position and precedence for each video element and gain for each audio element. The composing units can include decompressors for decompressing source signals furnished in compressed form and a compressor to compress the multimedia signal to be transmitted to a user. The source signals can be received from a packet network and the resulting multimedia signals transmitted to the respective users via the same packet network.

Rate loop processor for perceptual encoder/decoder

Abstract: A method and apparatus for quantizing audio signals is disclosed which advantageously produces a quantized audio signal which can be encoded within an acceptable range. Advantageously, the quantizer uses a scale factor which is interpolated between a threshold based on the calculated threshold of hearing at a given frequency and the absolute threshold of hearing at the same frequency.