Showing papers in "Applied Mathematics and Mechanics-english Edition in 2008"

Algorithms of common solutions to quasi variational inclusion and fixed point problems

Abstract: The purpose of this paper is to present an iterative scheme for finding a common element of the set of solutions to the variational inclusion problem with multivalued maximal monotone mapping and inverse-strongly monotone mappings and the set of fixed points of nonexpansive mappings in Hilbert space. Under suitable conditions, some strong convergence theorems for approximating this common elements are proved. The results presented in the paper not only improve and extend the main results in Korpelevich (Ekonomika i Matematicheskie Metody, 1976, 12(4):747–756), but also extend and replenish the corresponding results obtained by Iiduka and Takahashi (Nonlinear Anal TMA, 2005, 61(3):341–350), Takahashi and Toyoda (J Optim Theory Appl, 2003, 118(2):417–428), Nadezhkina and Takahashi (J Optim Theory Appl, 2006, 128(1):191–201), and Zeng and Yao (Taiwanese Journal of Mathematics, 2006, 10(5):1293–1303).

Influence of magnetic field and Hall currents on blood flow through a stenotic artery

Abstract: A micropolar model for blood simulating magnetohydrodynamic flow through a horizontally nonsymmetric but vertically symmetric artery with a mild stenosis is presented. To estimate the effect of the stenosis shape, a suitable geometry has been considered such that the horizontal shape of the stenosis can easily be changed just by varying a parameter referred to as the shape parameter. Flow parameters, such as velocity, the resistance to flow (the resistance impedance), the wall shear stress distribution in the stenotic region, and its magnitude at the maximum height of the stenosis (stenosis throat), have been computed for different shape parameters, the Hartmann number and the Hall parameter. This shows that the resistance to flow decreases with the increasing values of the parameter determining the stenosis shape and the Hall parameter, while it increases with the increasing Hartmann number. The wall shear stress and the shearing stress on the wall at the maximum height of the stenosis possess an inverse characteristic to the resistance to flow with respect to any given value of the Hartmann number and the Hall parameter. Finally, the effect of the Hartmann number and the Hall parameter on the horizontal velocity is examined.

Effects of heat and mass transfer on nonlinear MHD boundary layer flow over a shrinking sheet in the presence of suction

Abstract: This work is concerned with Magnetohydrodynamic viscous flow due to a shrinking sheet in the presence of suction. The cases of two dimensional and axisymmetric shrinking are discussed. The governing boundary layer equations are written into a dimensionaless form by similarity transformations. The transformed coupled nonlinear ordinary differential equations are numerically solved by using an advanced numeric technique. Favorability comparisons with previously published work are presented. Numerical results for the dimensionless velocity, temperature and concentration profiles as well as for the skin friction, heat and mass transfer and deposition rate are obtained and displayed graphically for pertinent parameters to show interesting aspects of the solution.

Research Progress On Thermal Protection Materials And Structures Of Hypersonic Vehicles

Abstract: Hypersonic vehicles represent future trends of military equipments and play an important role in future war. Thermal protection materials and structures, which relate to the safety of hypersonic vehicles, are one of the most key techniques in design and manufacture of hypersonic vehicles. Among these materials and structures, such as metallic temperature protection structure, the temperature ceramics and carbon/carbon composites are usually adopted in design. The recent progresses of research and application of ultra-high temperature materials in preparation, oxidation resistance, mechanical and physical characterization are summarized.

Effects of unsteady deformation of flapping wing on its aerodynamic forces

Abstract: Effects of unsteady deformation of a flapping model insect wing on its aerodynamic force production are studied by solving the Navier-Stokes equations on a dynamically deforming grid. Aerodynamic forces on the flapping wing are not much affected by considerable twist, but affected by camber deformation. The effect of combined camber and twist deformation is similar to that of camber deformation. With a deformation of 6% camber and 20° twist (typical values observed for wings of many insects), lift is increased by 10% ∼ 20% and lift-to-drag ratio by around 10% compared with the case of a rigid flat-plate wing. As a result, the deformation can increase the maximum lift coefficient of an insect, and reduce its power requirement for flight. For example, for a hovering bumblebee with dynamically deforming wings (6% camber and 20° twist), aerodynamic power required is reduced by about 16% compared with the case of rigid wings.

Enhancement of natural convection heat transfer from a fin by triangular perforation of bases parallel and toward its tip

Abstract: This study examines the heat transfer enhancement from a horizontal rectangular fin embedded with triangular perforations (their bases parallel and toward the fin tip) under natural convection. The fin’s heat dissipation rate is compared to that of an equivalent solid one. The parameters considered are geometrical dimensions and thermal properties of the fin and the perforations. The gain in the heat transfer enhancement and the fin weight reduction due to the perforations are considered. The study shows that the heat dissipation from the perforated fin for a certain range of triangular perforation dimensions and spaces between perforations result in improvement in the heat transfer over the equivalent solid fin. The heat transfer enhancement of the perforated fin increases as the fin thermal conductivity and its thickness are increased.

Semi-analytical solution to one-dimensional consolidation in unsaturated soils

Abstract: In this paper, a series of semi-analytical solutions to one-dimensional consolidation in unsaturated soils are obtained. The air governing equation by Fredlund for unsaturated soils consolidation is simplified. By applying the Laplace transform and the Cayley-Hamilton theorem to the simplified governing equations of water and air, Darcy’s law, and Fick’s law, the transfer function between the state vectors at top and at any depth is then constructed. Finally, by the boundary conditions, the excess pore-water pressure, the excess pore-air pressure, and the soil settlement are obtained under several kinds of boundary conditions with the large-area uniform instantaneous loading. By the Crump method, the inverse Laplace transform is performed, and the semi-analytical solutions to the excess pore-water pressure, the excess pore-air pressure, and the soils settlement are obtained in the time domain. In the case of one surface which is permeable to air and water, comparisons between the semi-analytical solutions and the analytical solutions indicate that the semi-analytical solutions are correct. In the case of one surface which is permeable to air but impermeable to water, comparisons between the semi-analytical solutions and the results of the finite difference method are made, indicating that the semi-analytical solution is also correct.

Effects of Chemical Reactions on MHD Micropolar Fluid Flow Past a Vertical Plate in slip-flow Regime

Abstract: Heat and mass transfer effects on the unsteady flow of a micropolar fluid through a porous medium bounded by a semi-infinite vertical plate in a slip-flow regime are studied taking into account a homogeneous chemical reaction of the first order. A uniform magnetic field acts perpendicular to the porous surface absorb micropolar fluid with a suction velocity varying with time. The free stream velocity follows an exponentially increasing or decreasing small perturbation law. Using the approximate method, the expressions for the velocity microrotation, temperature, and concentration are obtained. Futher, the results of the skin friction coefficient, the couple stress coefficient, and the rate of heat and mass transfer at the wall are presented with various values of fluid properties and flow conditions.

Two dimensional analytical solution for a partially vegetated compound channel flow

Abstract: The theory of an eddy viscosity model is applied to the study of the flow in a compound channel which is partially vegetated. The governing equation is constituted by analyzing the longitudinal forces acting on the unit volume where the effect of the vegetation on the flow is considered as a drag force item. The compound channel is divided into 3 sub-regions in the transverse direction, and the coefficients in every region’s differential equations were solved simultaneously. Thus, the analytical solution of the transverse distribution of the depth-averaged velocity for uniform flow in a partially vegetated compound channel was obtained. The results can be used to predict the transverse distribution of bed shear stress, which has an important effect on the transportation of sediment. By comparing the analytical results with the measured data, the analytical solution in this paper is shown to be sufficiently accurate to predict most hydraulic features for engineering design purposes.

Permanence and global attractivity of stage-structured predator-prey model with continuous harvesting on predator and impulsive stocking on prey

Abstract: We investigate a stage-structured delayed predator-prey model with impulsive stocking on prey and continuous harvesting on predator According to the fact of biological resource management, we improve the assumption of a predator-prey model with stage structure for predator population that each individual predator has the same ability to capture prey It is assumed that the immature and mature individuals of the predator population are divided by a fixed age, and immature predator population does not have the ability to attach prey Sufficient conditions are obtained, which guarantee the global attractivity of predator-extinction periodic solution and the permanence of the system Our results show that the behavior of impulsive stocking on prey plays an important role for the permanence of the system, and provide tactical basis for the biological resource management Numerical analysis is presented to illuminate the dynamics of the system

Some integral inequalities on time scales

Abstract: In this article, we study the reverse Holder type inequality and Holder inequality in two dimensional case on time scales. We also obtain many integral inequalities by using Holder inequalities on time scales which give Hardy’s inequalities as spacial cases.

New matrix method for analyzing vibration and damping effect of sandwich circular cylindrical shell with viscoelastic core

Abstract: Based on the linear theories of thin cylindrical shells and viscoelastic materials, a governing equation describing vibration of a sandwich circular cylindrical shell with a viscoelastic core under harmonic excitation is derived. The equation can be written as a matrix differential equation of the first order, and is obtained by considering the energy dissipation due to the shear deformation of the viscoelastic core layer and the interaction between all layers. A new matrix method for solving the governing equation is then presented with an extended homogeneous capacity precision integration approach. Having obtained these, vibration characteristics and damping effect of the sandwich cylindrical shell can be studied. The method differs from a recently published work as the state vector in the governing equation is composed of displacements and internal forces of the sandwich shell rather than displacements and their derivatives. So the present method can be applied to solve dynamic problems of the kind of sandwich shells with various boundary conditions and partially constrained layer damping. Numerical examples show that the proposed approach is effective and reliable compared with the existing methods.

Two-dimensional interactions due to moving load in generalized thermoelastic solid with diffusion

Abstract: The present paper is concerned with the investigation of disturbances in a homogeneous, isotropic elastic medium with generalized thermoelastic diffusion, when a moving source is acting along one of the co-ordinate axis on the boundary of the medium. Eigen value approach is applied to study the disturbance in Laplace-Fourier transform domain for a two dimensional problem. The analytical expressions for displacement components, stresses, temperature field, concentration and chemical potential are obtained in the physical domain by using a numerical technique for the inversion of Laplace transform based on Fourier expansion techniques. These expressions are calculated numerically for a copper like material and depicted graphically. As special cases, the results in generalized thermoelastic and elastic media are obtained. Effect of presence of diffusion is analyzed theoretically and numerically.

Using reproducing kernel for solving a class of partial differential equation with variable-coefficients

Abstract: How to solve the partial differential equation has been attached importance to by all kinds of fields. The exact solution to a class of partial differential equation with variable-coefficient is obtained in reproducing kernel space. For getting the approximate solution, give an iterative method, convergence of the iterative method is proved. The numerical example shows that our method is effective and good practicability.

Analytical model of sound transmission through laminated composite cylindrical shells considering transverse shear deformation

Abstract: Composite structures are often used in the aerospace industry due to the advantages offered by a high strength to weight ratio. Sound transmission through an infinite laminated composite cylindrical shell is studied in the context of the transmission of airborne sound into the aircraft interior. The shell is immersed in an external fluid medium and contains internal fluid. Airflow in the external fluid medium moves with a constant velocity. An exact solution is obtained by simultaneously solving the first-order shear deformation theory (FSDT) of a laminated composite shell and the acoustic wave equations. Transmission losses (TL) obtained from numerical solutions are compared with those of other authors. The effects of structural properties and flight conditions on TL are studied for a range of values, especially, the Mach number, stack sequences, and the angle of warp. Additionally, comparisons of the transmission losses are made between the classical thin shell theory (CST) and FSDT for laminated composite and isotropic cylindrical shells.

Analytic solutions to problem of elliptic hole with two straight cracks in one-dimensional hexagonal quasicrystals

Abstract: By means of the complex variable function method and the technique of conformal mapping, the anti-plane shear problem of an elliptic hole with two straight cracks in one-dimensional hexagonal quasicrystals is investigated. The solution of the stress intensity factor (SIF) for mode III problem has been found. Under the condition of limitation, both the known results and the SIF solution at the crack tip of a circular hole with two straight cracks and cross crack in one-dimensional hexagonal quasicrystals can be obtained.

Generalized thermoelastic functionally graded spherically isotropic solid containing a spherical cavity under thermal shock

Abstract: This paper is concerned with the determination of thermoelastic displacement, stress and temperature in a functionally graded spherically isotropic infinite elastic medium having a spherical cavity, in the context of the linear theory of generalized thermoelasticity with two relaxation time parameters (Green and Lindsay theory). The surface of cavity is stress-free and is subjected to a time-dependent thermal shock. The basic equations have been written in the form of a vector-matrix differential equation in the Laplace transform domain, which is then solved by an eigenvalue approach. Numerical inversion of the transforms is carried out using the Bellman method. Displacement, stress and temperature are computed and presented graphically. It is found that variation in the thermo-physical properties of a material strongly influences the response to loading. A comparative study with a corresponding homogeneous material is also made.

Numerical investigations on dynamic process of muzzle flow

Abstract: The integrative process of a quiescent projectile accelerated by high-pressure gas to shoot out at a supersonic speed and beyond the range of a precursor flow field was simulated numerically. The calculation was based on ALE equations and a second-order precision Roe method that adopted chimera grids and a dynamic mesh. From the predicted results, the coupling and interaction among the precursor flow field, propellant gas flow field and high-speed projectile were discussed in detail. The shock-vortex interaction, shockwave reflection, shock-projectile interaction with shock diffraction, and shock focus were clearly demonstrated to explain the effect on the acceleration of the projectile.

Some discrete SI and SIS epidemic models

Abstract: The probability is introduced to formulate the death of individuals, the recovery of the infected individuals and incidence of epidemic disease. Based on the assumption that the number of individuals in a population is a constant, discrete-time SI and SIS epidemic models with vital dynamics are established respectively corresponding to the case that the infectives can recover from the disease or not. For these two models, the results obtained in this paper show that there is the same dynamical behavior as their corresponding continuous ones, and the threshold determining its dynamical behavior is found. Below the threshold the epidemic disease dies out eventually, above the threshold the epidemic disease becomes an endemic eventually, and the number of the infectives approaches a positive constant.

Propagation of Rayleigh waves on free surface of transversely isotropic generalized thermoelastic diffusion

Abstract: The present paper is devoted to the study of Rayleigh wave propagation in a homogeneous, transversely isotropic, thermoelastic diffusive half-space, subject to stress free, thermally insulated/isothermal, and chemical potential boundary conditions in the context of the generalized thermoelastic diffusion theory. The Green-Lindsay(GL) theory is used in the study. In this theory, thermodiffusion and thermodiffusion mechanical relaxations are governed by four different time constants. Secular equations for surface wave propagation in the considered media are derived. Anisotropy and diffusion effects on the phase velocity, attenuation coefficient are graphically presented in order to present the analytical results and make comparison. Some special cases of frequency equations are derived from the present investigation.

Entropy generation analysis of thermally developing forced convection in fluid-saturated porous medium

Abstract: Entropy generation for thermally developing forced convection in a porous medium bounded by two isothermal parallel plates is investigated analytically on the basis of the Darcy flow model where the viscous dissipation effects had also been taken into account. A parametric study showed that decreasing the group parameter and the Peclet number increases the entropy generation while for the Brinkman number the converse is true. Heatline visualization technique is applied with an emphasis on the Br < 0 case where there is somewhere that heat transfer changes direction at some streamwise location to the wall instead of its original direction, i.e., from the wall.

PSE as applied to problems of secondary instability in supersonic boundary layers

Abstract: Parabolized stability equations (PSE) approach is used to investigate problems of secondary instability in supersonic boundary layers. The results show that the mechanism of secondary instability does work, whether the 2-D fundamental disturbance is of the first mode or second mode T-S wave. The variation of the growth rates of the 3-D sub-harmonic wave against its span-wise wave number and the amplitude of the 2-D fundamental wave is found to be similar to those found in incompressible boundary layers. But even as the amplitude of the 2-D wave is as large as the order 2%, the maximum growth rate of the 3-D sub-harmonic is still much smaller than the growth rate of the most unstable second mode 2-D T-S wave. Consequently, secondary instability is unlikely the main cause leading to transition in supersonic boundary layers.

Terminal sliding mode control for coordinated motion of a space rigid manipulator with external disturbance

Abstract: The control problem of coordinated motion of a free-floating space rigid manipulator with external disturbance is discussed. By combining linear momentum conversion and the Lagrangian approach, the full-control dynamic equation and the Jacobian relation of a free-floating space rigid manipulator are established and then inverted to the state equation for control design. Based on the terminal sliding mode control (SMC) technique, a mathematical expression of the terminal sliding surface is proposed. The terminal SMC scheme is then developed for coordinated motion between the base’s attitude and the end-effector of the free-floating space manipulator with external disturbance. This proposed control scheme not only guarantees the existence of the sliding phase of the closed-loop system, but also ensures that the output tracking error converges to zero in finite time. In addition, because the initial system state is always at the terminal sliding surface, the control scheme can eliminate reaching phase of the SMC and guarantee global robustness and stability of the closed-loop system. A planar free-floating space rigid manipulator is simulated to verify the feasibility of the proposed control scheme.

Elasticity solutions for functionally graded plates in cylindrical bending

Abstract: The plate theory of functionally graded materials suggested by Mian and Spencer is extended to analyze the cylindrical bending problem of a functionally graded rectangular plate subject to uniform load. The expansion formula for displacements is adopted. While keeping the assumption that the material parameters can vary along the thickness direction in an arbitrary fashion, this paper considers orthotropic materials rather than isotropic materials. In addition, the traction-free condition on the top surface is replaced with the condition of uniform load applied on the top surface. The plate theory for the particular case of cylindrical bending is presented by considering an infinite extent in the y-direction. Effects of boundary conditions and material inhomogeneity on the static response of functionally graded plates are investigated through a numerical example.

Supercritical as well as subcritical Hopf bifurcation in nonlinear flutter systems

Abstract: The Hopf bifurcations of an airfoil flutter system with a cubic nonlinearity are investigated, with the flow speed as the bifurcation parameter. The center manifold theory and complex normal form method are used to obtain the bifurcation equation. Interestingly, for a certain linear pitching stiffness the Hopf bifurcation is both supercritical and subcritical. It is found, mathematically, this is caused by the fact that one coefficient in the bifurcation equation does not contain the first power of the bifurcation parameter. The solutions of the bifurcation equation are validated by the equivalent linearization method and incremental harmonic balance method.

Dynamical response of hyper-elastic cylindrical shells under periodic load

Abstract: Dynamical responses, such as motion and destruction of hyper-elastic cylindrical shells subject to periodic or suddenly applied constant load on the inner surface, are studied within a framework of finite elasto-dynamics. By numerical computation and dynamic qualitative analysis of the nonlinear differential equation, it is shown that there exists a certain critical value for the internal load describing motion of the inner surface of the shell. Motion of the shell is nonlinear periodic or quasi-periodic oscillation when the average load of the periodic load or the constant load is less than its critical value. However, the shell will be destroyed when the load exceeds the critical value. Solution to the static equilibrium problem is a fixed point for the dynamical response of the corresponding system under a suddenly applied constant load. The property of fixed point is related to the property of the dynamical solution and motion of the shell. The effects of thickness and load parameters on the critical value and oscillation of the shell are discussed.

Diffusion-driven instability and Hopf bifurcation in Brusselator system

Abstract: The Hopf bifurcation for the Brusselator ordinary-differential-equation (ODE) model and the corresponding partial-differential-equation (PDE) model are investigated by using the Hopf bifurcation theorem. The stability of the Hopf bifurcation periodic solution is discussed by applying the normal form theory and the center manifold theorem. When parameters satisfy some conditions, the spatial homogenous equilibrium solution and the spatial homogenous periodic solution become unstable. Our results show that if parameters are properly chosen, Hopf bifurcation does not occur for the ODE system, but occurs for the PDE system.

Synchronization of N different coupled chaotic systems with ring and chain connections

Abstract: Synchronization of N different coupled chaotic systems with ring and chain connections is investigated. The New system, the Chen system, the Lu system, the Lorenz system, and the Rossler system are used as examples in verifying effectiveness of the method. Based on the Lyapunov stability theory, the form of the controller is designed and the area of the coupling coefficients is determined. Simulations indicate that global synchronization of the N different chaotic systems can be realized by choosing appropriate coupling coefficients by using the controller.

Elasticity solution of clamped-simply supported beams with variable thickness

Abstract: This paper studies the stress and displacement distributions of continuously varying thickness beams with one end clamped and the other end simply supported under static loads. By introducing the unit pulse functions and Dirac functions, the clamped edge can be made equivalent to the simply supported one by adding the unknown horizontal reactions. According to the governing equations of the plane stress problem, the general expressions of displacements, which satisfy the governing differential equations and the boundary conditions at two ends of the beam, can be deduced. The unknown coefficients in the general expressions are then determined by using Fourier sinusoidal series expansion along the upper and lower boundaries of the beams and using the condition of zero displacements at the clamped edge. The solution obtained has excellent convergence properties. Comparing the numerical results to those obtained from the commercial software ANSYS, excellent accuracy of the present method is demonstrated.

Aerodynamic optimization of 3D wing based on iSIGHT

Abstract: A method for combining the CFD software, Fluent, with the iSIGHT design platform is presented to optimize a three-dimensional wing to ameliorate its aerodynamics performance In the optimization design, two kinds of genetic algorithms, the Neighborhood Cultivation Genetic Algorithm (NCGA) and the Non-dominated Sorting Genetic Algorithm (NSGAII), are employed and the Navier-Stoke (N-S) equations are adopted to derive the aerodynamics functions of the 3D wing The aerodynamic performance of the optimized wing has been significantly improved, which shows that the approach can be extended and employed in other cases