Showing papers in "Journal of the American Chemical Society in 2023"

Boosting Oxygen Electrocatalytic Activity of Fe–N–C Catalysts by Phosphorus Incorporation

Abstract: Nitrogen-doped graphitic carbon materials hosting single-atom iron (Fe–N–C) are major non-precious metal catalysts for the oxygen reduction reaction (ORR). The nitrogen-coordinated Fe sites are described as the first coordination sphere. As opposed to the good performance in ORR, that in the oxygen evolution reaction (OER) is extremely poor due to the sluggish O–O coupling process, thus hampering the practical applications of rechargeable zinc (Zn)–air batteries. Herein, we succeed in boosting the OER activity of Fe–N–C by additionally incorporating phosphorus atoms into the second coordination sphere, here denoted as P/Fe–N–C. The resulting material exhibits excellent OER activity in 0.1 M KOH with an overpotential as low as 304 mV at a current density of 10 mA cm–2. Even more importantly, they exhibit a remarkably small ORR/OER potential gap of 0.63 V. Theoretical calculations using first-principles density functional theory suggest that the phosphorus enhances the electrocatalytic activity by balancing the *OOH/*O adsorption at the FeN4 sites. When used as an air cathode in a rechargeable Zn–air battery, P/Fe–N–C delivers a charge–discharge performance with a high peak power density of 269 mW cm–2, highlighting its role as the state-of-the-art bifunctional oxygen electrocatalyst.

Tracking the Role of Defect Types in Co3O4 Structural Evolution and Active Motifs during Oxygen Evolution Reaction.

Abstract: Dynamic reconstruction of catalyst active sites is particularly important for metal oxide-catalyzed oxygen evolution reaction (OER). However, the mechanism of how vacancy-induced reconstruction aids OER remains ambiguous. Here, we use Co3O4 with Co or O vacancies to uncover the effects of different defects in the reconstruction process and the active motifs relevant to alkaline OER. Combining in situ characterization and theoretical calculations, we found that cobalt oxides are converted to an amorphous [Co(OH)6] intermediate state, and then the mismatched rates of *OH adsorption and deprotonation lead to irreversible catalyst reconstruction. The stronger *OH adsorption but weaker deprotonation induced by O defects provides the driving force for reconstruction, while Co defects favor dehydrogenation and reduce the reconstruction rate. Importantly, both O and Co defects trigger highly OER-active bridge Co sites in reconstructed catalysts, of which Co defects induce a short Co-Co distance (3.38 Å) under compressive lattice stress and show the best OER activity (η10 of 262 mV), superior to reconstructed oxygen-defected Co3O4-VO (η10 of 300 mV) and defect-free Co3O4 (η10 of 320 mV). This work highlights that engineering defect-dependent reconstruction may provide a rational route for electrocatalyst design in energy-related applications.

Three-Dimensional Covalent Organic Frameworks with Ultra-Large Pores for Highly Efficient Photocatalysis.

Abstract: Benefiting from their unique structural merits, three-dimensional (3D) large-pore COF materials demonstrate high surface areas and interconnected large channels, which makes these materials promising in practical applications. Unfortunately, functionalization strategies and application research are still absent in these structures. To this end, a series of functional 3D stp-topologized COFs are designed based on porphyrin or metalloporphyrin moieties, named JUC-640-M (M = Co, Ni, or H). Interestingly, JUC-640-H exhibits a record-breaking low crystal density (0.106 cm3 g-1) among all crystalline materials, along with the largest interconnected pore size (4.6 nm) in 3D COFs, high surface area (2204 m2 g-1), and abundant exposed porphyrin moieties (0.845 mmol g-1). Inspired by the unique structural characteristics and photoelectrical performance, JUC-640-Co is utilized for the photoreduction of CO2 to CO and demonstrates a high CO production rate (15.1 mmol g-1 h-1), selectivity (94.4%), and stability. It should be noted that the CO production rate of JUC-640-Co has exceeded those of all reported COF-based materials. This work not only produces a series of novel 3D COFs with large channels but also provides a new guidance for the functionalization and applications of COFs.

EnT-Mediated N-S Bond Homolysis of a Bifunctional Reagent Leading to Aliphatic Sulfonyl Fluorides.

Abstract: Sulfur(VI) fluoride exchange (SuFEx) gives rise to a plethora of high-valent sulfur linkages; however, the availability of (aliphatic) sulfonyl fluoride manifolds lag behind, owing to the limited sources of introducing the SO2F moiety via a classical two-electron approach. Recently, radical-based methodologies have emerged as a complementary strategy to increase the diversity of accessible click partners. In this work, synthesis of a bench-stable sulfamoyl fluoride reagent is presented, which may undergo sigma-bond homolysis upon visible-light-induced sensitization to form protected β-amino sulfonyl fluorides from alkene feedstocks. Notably, this offers an appealing strategy to access various building blocks for peptido sulfonyl fluorides, relevant in a medicinal chemistry context, as well as an intriguing entry to β-ammonium sulfonates and β-sultams, from alkenes. Densely functionalized 1,3-sultones were obtained by employing allyl alcohols as substrates. Surprisingly, allyl chloride-derived β-imino sulfonyl fluoride underwent S-O bond formation and ring closure to yield rigid cyclopropyl β-imino sulfonate ester under SuFEx conditions. Furthermore, by engaging a thiol-based hydrogen atom donor in the reaction, the reactivity of the same reagent can be tuned toward the direct synthesis of aliphatic sulfonyl fluorides. Mechanistic experiments indicate an energy transfer (EnT)-mediated process. The transient sulfonyl fluoride radical adds to the alkene and product formation occurs upon either radical-radical coupling or hydrogen atom transfer (HAT), respectively.

Derivatized Benzothiazoles as Two-Photon-Absorbing Organic Photosensitizers Active under Near Infrared Light Irradiation.

Abstract: Homogeneous organic photocatalysis typically requires molecular photosensitizers absorbing in the ultraviolet-visible (UV/vis) region, because UV/vis photons possess the sufficient energy to excite those one-photon-absorbing photosensitizers to the desired excited states. However, UV/vis light irradiation has many potential limitations, especially for large-scale applications, such as low penetration through reaction media, competing absorption by substrates and co-catalysts, and incompatibility with substrates bearing light-sensitive functionalities. In fact, these drawbacks can be effectively avoided if near infrared (NIR) photons can be utilized to drive the target reactions. Herein, we report two benzothiazole-derived compounds as novel two-photon-absorbing (TPA) organic photosensitizers, which can function under NIR light irradiation using inexpensive LED as the light source. We demonstrate that by judicially modulating the donor-π-acceptor-π-donor-conjugated structure containing a bibenzothiazole core and imine bridges, excellent two-photon absorption capability in the NIR region can be achieved, approaching 2000 GM at 850 nm. Together with large quantum yields (∼0.5), these benzothiazole-derived TPA organic photosensitizers exhibit excellent performance in driving various O2-involved organic reactions upon irradiation at 850 nm, showing great penetration depth, superior to that upon blue light irradiation. A suite of photophysical and computational studies were performed to shed light on the underlying electronic states responsible for the observed TPA capability. Overall, this work highlights the promise of developing Ru/Ir-free organic photosensitizers operative in the NIR region by taking advantage of the two-photon absorption mechanism.

Enabling Specific Photocatalytic Methane Oxidation by Controlling Free Radical Type.

Abstract: Selective CH4 oxidation to CH3OH or HCHO with O2 in H2O under mild conditions provides a desired sustainable pathway for synthesis of commodity chemicals. However, manipulating reaction selectivity while maintaining high productivity remains a huge challenge due to the difficulty in the kinetic control of the formation of a desired oxygenate against its overoxidation. Here, we propose a highly efficient strategy, based on the precise control of the type of as-formed radicals by rational design on photocatalysts, to achieve both high selectivity and high productivity of CH3OH and HCHO in CH4 photooxidation for the first time. Through tuning the band structure and the size of active sites (i.e., single atoms or nanoparticles) in our Au/In2O3 catalyst, we show alternative formation of two important radicals, •OOH and •OH, which leads to distinctly different reaction paths to the formation of CH3OH and HCHO, respectively. This approach gives rise to a remarkable HCHO selectivity and yield of 97.62% and 6.09 mmol g-1 on In2O3-supported Au single atoms (Au1/In2O3) and an exceptional CH3OH selectivity and yield of 89.42% and 5.95 mmol g-1 on In2O3-supported Au nanoparticles (AuNPs/In2O3), respectively, upon photocatalytic CH4 oxidation for 3 h at room temperature. This work opens a new avenue toward efficient and selective CH4 oxidation by delicate design of composite photocatalysts.

Self-Stacking Autocatalytic Molecular Circuit with Minimal Catalytic DNA Assembly.

Abstract: Isothermal autocatalytic DNA circuits have been proven to be versatile and powerful biocomputing platforms by virtue of their self-sustainable and self-accelerating reaction profiles, yet they are currently constrained by their complicated designs, severe signal leakages, and unclear reaction mechanisms. Herein, we developed a simpler-yet-efficient autocatalytic assembly circuit (AAC) for highly robust bioimaging in live cells and mice. The scalable and sustainable AAC system was composed of a mere catalytic DNA assembly reaction with minimal strand complexity and, upon specific stimulation, could reproduce numerous new triggers to expedite the whole reaction. Through in-depth theoretical simulations and systematic experimental demonstrations, the catalytic efficiency of these reproduced triggers was found to play a vital role in the autocatalytic profile and thus could be facilely improved to achieve more efficient and characteristic autocatalytic signal amplification. Due to its exponentially high signal amplification and minimal reaction components, our self-stacking AAC facilitated the efficient detection of trace biomolecules with low signal leakage, thus providing great clinical diagnosis and therapeutic assessment potential.

Fast-Specific Fluorescent Probes to Visualize Norepinephrine Signaling Pathways and Its Flux in the Epileptic Mice Brain.

Abstract: Norepinephrine (NE) is synthesized in the locus coeruleus and widely projected throughout the brain and spinal cord. It regulates various actions and consciousness linked to a variety of neurological diseases. A "hunting-shooting" strategy was proposed in this work to improve the specificity and response rate of an NE fluorescent probe: 2-(cyclohex-2-en-1-ylidene)malononitrile derivatives were chosen as a fluorophore. To create a dual-site probe, an aldehyde group was added to the ortho of the ester group (or benzene sulfonate). Because of its excellent electrophilic activity, the aldehyde group could rapidly "hunt" the amino group and then form an intramolecular five-membered ring via the nucleophilic reaction with the β-hydroxyl group. The -NH- in the five-membered ring "shoots" the adjacent ester group, releasing the fluorophore and allowing for rapid and specific NE detection. The NE release and reuptake ″emetic″-″swallow″ transient process is captured and visualized under the action of the primary NE receptor drug. Furthermore, by introducing halogen into the fluorophore to lengthen the absorption wavelength, improve lipid solubility, and adjust the pKa appropriately, the probe successfully penetrated the blood-brain barrier (BBB). In situ synchronous probe imaging was used to detect the NE level in the brains of epileptic and normal mice, and abnormal expression of NE in the brain was discovered during epilepsy. Brain anatomy was used to examine the distribution and level changes of NE in various brain regions before and after epilepsy. This research provides useful tools and a theoretical foundation for diagnosing and treating central nervous system diseases early.

Exchangeable HaloTag Ligands for Super-Resolution Fluorescence Microscopy

Abstract: The specific and covalent labeling of the protein HaloTag with fluorescent probes in living cells makes it a powerful tool for bioimaging. However, the irreversible attachment of the probe to HaloTag precludes imaging applications that require transient binding of the probe and comes with the risk of irreversible photobleaching. Here, we introduce exchangeable ligands for fluorescence labeling of HaloTag (xHTLs) that reversibly bind to HaloTag and that can be coupled to rhodamines of different colors. In stimulated emission depletion (STED) microscopy, probe exchange of xHTLs allows imaging with reduced photobleaching as compared to covalent HaloTag labeling. Transient binding of fluorogenic xHTLs to HaloTag fusion proteins enables points accumulation for imaging in nanoscale topography (PAINT) and MINFLUX microscopy. We furthermore introduce pairs of xHTLs and HaloTag mutants for dual-color PAINT and STED microscopy. xHTLs thus open up new possibilities in imaging across microscopy platforms for a widely used labeling approach.

Synthesis of Sulfilimines Enabled by Copper-Catalyzed <i>S</i>-Arylation of Sulfenamides

Abstract: Herein, an unprecedented synthetic route to sulfilimines via a copper-catalyzed Chan-Lam-type coupling of sulfenamides is presented. A key to success in this novel transformation is the chemoselective S-arylation of S(II) sulfenamides to form S(IV) sulfilimines, overriding the competitive, and more thermodynamically favored, C-N bond formation that does not require a change in the sulfur oxidation state. Computations reveal that the selectivity arises from a selective transmetallation event where bidentate sulfenamide coordination through the sulfur and oxygen atoms favors the S-arylation pathway. The mild and environmentally benign catalytic conditions enable broad functional group compatibility, allowing a variety of diaryl or alkyl aryl sulfilimines to be efficiently prepared. The Chan-Lam coupling procedure could also tolerate alkenylboronic acids as coupling partners to afford alkenyl aryl sulfilimines, a class of scaffolds that cannot be directly synthesized via conventional imination strategies. The benzoyl-protecting groups could be conveniently removed from the product, which, in turn, could be readily transformed into several S(IV) and S(VI) derivatives.

Rational Design of Non-Centrosymmetric Hybrid Halide Perovskites.

Abstract: Structural non-centrosymmetry in semiconducting organic-inorganic hybrid halide perovskites can introduce functionalities like anomalous photovoltaics and nonlinear optical properties. Here we introduce a design principle to prepare Pb- and Bi-based two- and one-dimensional hybrid perovskites with polar non-centrosymmetric space groups. The design principle relies on creating dissimilar hydrogen and halogen bonding non-covalent interactions at the organic-inorganic interface. For example, in organic cations like I-(CH2)3-NH2(CH3)+ (MIPA), -CH3 is substituted by -CH2I at one end, and -NH3+ is substituted by -NH2(CH3)+ at the other end. These substitutions of two -H atoms by -I and -CH3 reduce the rotational symmetry of MIPA at both ends, compared to an unsubstituted cation, for example, H3C-(CH2)3-NH3+. Consequently, the dissimilar hydrogen-iodine and iodine-iodine interactions at the organic-inorganic interface of (MIPA)2PbI4 2D perovskites break the local inversion symmetries of Pb-I octahedra. Owing to this non-centrosymmetry, (MIPA)2PbI4 displays visible to infrared tunable nonlinear optical properties with second and third harmonic generation susceptibility values of 5.73 pm V-1 and 3.45 × 10-18 m2 V-2, respectively. Also, the single crystal shows photocurrent on shining visible light at no external bias, exhibiting anomalous photovoltaic effect arising from the structural asymmetry. The design strategy was extended to synthesize four new non-centrosymmetric hybrid perovskite compounds. Among them, one-dimensional (H3N-(CH2)3-NH(CH3)2)BiI5 shows a second harmonic generation susceptibility of 7.3 pm V-1 and a high anomalous photovoltaic open-circuit voltage of 22.6 V.

General Synthesis of a Diatomic Catalyst Library via a Macrocyclic Precursor-Mediated Approach.

Abstract: Heterogeneous catalysts containing diatomic sites are often hypothesized to have distinctive reactivity due to synergistic effects, but there are limited approaches that enable the convenient production of diatomic catalysts (DACs) with diverse metal combinations. Here, we present a general synthetic strategy for constructing a DAC library across a wide spectrum of homonuclear (Fe2, Co2, Ni2, Cu2, Mn2, and Pd2) and heteronuclear (Fe-Cu, Fe-Ni, Cu-Mn, and Cu-Co) bimetal centers. This strategy is based on an encapsulation-pyrolysis approach, wherein a porous material-encapsulated macrocyclic complex mediates the structure of DACs by preserving the main body of the molecular framework during pyrolysis. We take the oxygen reduction reaction (ORR) as an example to show that this DAC library can provide great opportunities for electrocatalyst development by unlocking an unconventional reaction pathway. Among all investigated sites, Fe-Cu diatomic sites possess exceptional high durability for ORR because the Fe-Cu pairs can steer elementary steps in the catalytic cycle and suppress the troublesome Fenton-like reactions.

Tough while Recyclable Plastics Enabled by Monothiodilactone Monomers.

Abstract: The current scale of plastics production and the attendant waste disposal issues represent an underexplored opportunity for chemically recyclable polymers. Typical recyclable polymers are subject to the trade-off between the monomer's polymerizability and the polymer's depolymerizability as well as insufficient performance for practical applications. Herein, we demonstrate that a single atom oxygen-by-sulfur substitution of relatively highly strained dilactone is an effective and robust strategy for converting the "non-recyclable" polyester into a chemically recyclable polymer by lowering the ring strain energy in the monomer (from 16.0 kcal mol-1 in dilactone to 9.1 kcal mol-1 in monothiodilactone). These monothio-modification monomers enable both high/selective polymerizability and recyclability, otherwise conflicting features in a typical monomer, as evidenced by regioselective ring-opening, minimal transthioesterifications, and quantitative recovery of the pristine monomer. Computational and experimental studies demonstrate that an n→π* interaction between the adjacent ester and thioester in the polymer backbone has been implicated in the high selectivity for propagation over transthioesterification. The resulting polymer demonstrates high performance with its mechanical properties being comparable to some commodity polyolefins. Thio-modification is a powerful strategy for enabling conversion of six-membered dilactones into chemically recyclable and tough thermoplastics that exhibit promise as next-generation sustainable polymers.

Native Amides as Enabling Vehicles for Forging sp3–sp3 Architectures via Interrupted Deaminative Ni-Catalyzed Chain-Walking

Abstract: Herein, we disclose an interrupted deaminative Ni-catalyzed chain-walking strategy that forges sp3–sp3 architectures at remote, yet previously unfunctionalized, methylene sp3 C–H sites enabled by the presence of native amides. This protocol is characterized by its mild conditions and wide scope, including challenging substrate combinations. Site-selectivity can be dictated by a judicious choice of the ligand, thus offering an opportunity to enable sp3–sp3 bond formations that are otherwise inaccessible in conventional chain-walking events.

Spontaneous Reduction by One Electron on Water Microdroplets Facilitates Direct Carboxylation with CO2.

Abstract: Recent advances in microdroplet chemistry have shown that chemical reactions in water microdroplets can be accelerated by several orders of magnitude compared to the same reactions in bulk water. Among the large plethora of unique properties of microdroplets, an especially intriguing one is the strong reducing power that can be sometimes as high as alkali metals as a result of the spontaneously generated electrons. In this study, we design a catalyst-free strategy that takes advantage of the reducing ability of water microdroplets to reduce a certain molecule, and the reduced form of that molecule can convert CO2 into value-added products. By spraying the water solution of C6F5I into microdroplets, an exotic and fragile radical anion, C6F5I•-, is observed, where the excess electron counter-intuitively locates on the σ* antibonding orbital of the C-I bond as evidenced by anion photoelectron spectroscopy. This electron weakens the C-I bond and causes the formation of C6F5-, and the latter attacks the carbon atom on CO2, forming the pentafluorobenzoate product, C6F5CO2-. This study provides a good example of strategically making use of the spontaneous properties of water microdroplets, and we anticipate that microdroplet chemistry will be a green avenue rich in new opportunities in CO2 utilization.

Repertoire of Computationally Designed Peroxygenases for Enantiodivergent C–H Oxyfunctionalization Reactions

Abstract: The generation of enantiodivergent biocatalysts for C–H oxyfunctionalizations is ever more important in modern synthetic chemistry. Here, we have applied the FuncLib algorithm based on phylogenetic and Rosetta calculations to design a diverse repertoire of active, stable, and enantiodivergent fungal peroxygenases. 24 designs, each carrying 4–5 mutations in the catalytic core, were expressed functionally in yeast and benchmarked against characteristic model compounds. Several designs were active and stable in a range of temperature and pH, displaying unprecedented enantiodivergence, changing regioselectivity from alkyl to aromatic hydroxylation, and increasing catalytic efficiencies up to 10-fold, with 15-fold improvements in total turnover numbers over the parental enzyme. We find that this dramatic functional divergence stems from beneficial epistasis among the mutations and an extensive reorganization of the heme channel. Our work demonstrates that FuncLib can rapidly design highly functional libraries enriched in enantioselective peroxygenases not seen in nature for a range of biotechnological applications.

Diversifying Amino Acids and Peptides via Deaminative Reductive Cross-Couplings Leveraging High-Throughput Experimentation.

Abstract: A deaminative reductive coupling of amino acid pyridinium salts with aryl bromides has been developed to enable efficient synthesis of noncanonical amino acids and diversification of peptides. This method transforms natural, commercially available lysine, ornithine, diaminobutanoic acid, and diaminopropanoic acid to aryl alanines and homologated derivatives with varying chain lengths. Attractive features include ability to transverse scales, tolerance of pharma-relevant (hetero)aryls and biorthogonal functional groups, and the applicability beyond monomeric amino acids to short and macrocyclic peptide substrates. The success of this work relied on high-throughput experimentation to identify complementary reaction conditions that proved critical for achieving the coupling of a broad scope of aryl bromides with a range of amino acid and peptide substrates including macrocyclic peptides.

Pulsed Nitrate-to-Ammonia Electroreduction Facilitated by Tandem Catalysis of Nitrite Intermediates.

Abstract: Electroreduction of nitrate to ammonia offers a promising pathway for nutrient recycling and recovery from wastewater with energy and environmental sustainability. There have been considerable efforts on the regulation of reaction pathways to facilitate nitrate-to-ammonia conversion over the competing hydrogen evolution reaction but only with limited success. Here, we report a Cu single-atom gel (Cu SAG) electrocatalyst that produces NH3 from both nitrate and nitrite under neutral conditions. Given the unique mechanism of NO2- activation on Cu SAGs with spatial confinement and strengthened kinetics, a pulse electrolysis strategy is presented to cascade the accumulation and conversion of NO2- intermediates during NO3- reduction with the prohibited competition from the hydrogen evolution reaction, thus substantially enhancing the Faradaic efficiency and the yield rate for ammonia production compared with constant potential electrolysis. This work underlines the cooperative approach of the pulse electrolysis and SAGs with three-dimensional (3D) framework structures for highly efficient nitrate-to-ammonia conversion enabled by tandem catalysis of unfavorable intermediates.

Enantioselective C(sp³)–C(sp³) Reductive Cross-Electrophile Coupling of Unactivated Alkyl Halides with α-Chloroboronates via Dual Nickel/Photoredox Catalysis

Abstract: Substantial advances in enantioconvergent C(sp3)–C(sp3) bond formations have been made with nickel-catalyzed cross-coupling of racemic alkyl electrophiles with organometallic reagents or nickel-hydride-catalyzed hydrocarbonation of alkenes. Herein, we report an unprecedented enantioselective C(sp3)–C(sp3) reductive cross-coupling by the direct utilization of two different alkyl halides with dual nickel/photoredox catalysis system. This highly selective coupling of racemic α-chloroboronates and unactivated alkyl iodides furnishes chiral secondary alkyl boronic esters, which serve as useful and important intermediates in the realm of organic synthesis and enable a desirable protocol to fast construction of enantioenriched complex molecules.

Construction of Covalent Organic Frameworks via a Visible-Light-Activated Photocatalytic Multicomponent Reaction.

Abstract: Multicomponent reactions (MCRs), as a powerful one-pot combinatorial synthesis tool, have been recently applied to the synthesis of covalent organic frameworks (COFs). Compared with the thermally driven MCRs, the photocatalytic MCR-based COF synthesis has not yet been investigated. Herein, we first report the construction of COFs by a photocatalytic multicomponent reaction. Upon visible-light irradiation, a series of COFs with excellent crystallinity, stability, and permanent porosity are successfully synthesized via photoredox-catalyzed multicomponent Petasis reaction under ambient conditions. Additionally, the obtained Cy-N3-COF exhibits excellent photoactivity and recyclability for the visible-light-driven oxidative hydroxylation of arylboronic acids. The concept of photocatalytic multicomponent polymerization not only enriches the methodology for COF synthesis but also opens a new avenue for the construction of COFs that might not be possible with the existing synthetic methods based on thermally driven MCRs.

Catalytic Asymmetric Deoxygenative Cyclopropanation Reactions by a Chiral Salen-Mo Catalyst.

Abstract: The catalytic asymmetric cyclopropanation reaction of alkenes with diazo compounds is a direct and powerful method to construct chiral cyclopropanes that are essential to drug discovery. However, diazo compounds are potentially explosive and often require hazardous reagents for their preparation. Here, we report on the use of 1,2-dicarbonyl compounds as safe and readily available surrogates for diazo compounds in the direct catalytic asymmetric deoxygenative cyclopropanation reaction. Enabled by a class of simple and readily accessible chiral salen-Mo catalysts, the reaction proceeded with generally good enantioselectivities and yields toward a wide range of substrates (80 examples). Preliminary mechanistic studies suggested that the proposed μ-oxo bridged dinuclear Mo(III)-species was the catalytically active species. This strategy not only provides a promising route for the synthesis of chiral cyclopropanes but also opens a new window for the potential applications of chiral salen-Mo complexes in asymmetric catalysis.

Supramolecular Photosensitizer Enables Oxygen-Independent Generation of Hydroxyl Radicals for Photodynamic Therapy.

Abstract: The highly oxygen-dependent nature of photodynamic therapy (PDT) limits its therapeutic efficacy against hypoxic solid tumors in clinics, which is an urgent problem to be solved. Herein, we develop an oxygen-independent supramolecular photodynamic agent that produces hydroxyl radical (•OH) by oxidizing water in the presence of intracellularly abundant pyruvic acid under oxygen-free conditions. A fluorene-substituted BODIPY was designed as the electron donor and coassembled with perylene diimide as the electron acceptor to form the quadruple hydrogen-bonded supramolecular photodynamic agent. Detailed mechanism studies reveal that intermolecular electron transfer and charge separation upon light irradiation result in an efficient generation of radical ion pairs. Under oxygen-free conditions, the cationic radicals directly oxidize water to generate highly cytotoxic •OH, and the anionic radicals transfer electrons to pyruvic acid, realizing the catalytic cycle. Thus, this photodynamic agent exhibited superb photocytotoxicity even under severe hypoxic environments and excellent in vivo antitumor efficacy on HeLa-bearing mouse models. This work provides a strategy for constructing oxygen-independent photodynamic agents, which opens up an avenue for effective PDT against hypoxic tumors.

Strong Axiality in a Dysprosium(III) Bis(borolide) Complex Leads to Magnetic Blocking at 65 K

Abstract: Substituted dysprosocenium complexes of the type [Dy(CpR)2]+ exhibit slow magnetic relaxation at cryogenic temperatures and have emerged as top-performing single-molecule magnets. The remarkable properties of these compounds derive in part from the strong axial ligand field afforded by the cyclopentadiene anions, and the design of analogous compounds with even stronger ligand fields is one promising route toward identifying new single-molecule magnets that retain a magnetic memory at even higher temperatures. Here, we report the synthesis and characterization of a dysprosium bis(borolide) compound, [K(18-crown-6)][Dy(BC4Ph5)2] (1), featuring the dysprosocenate anion [Dy(BC4Ph5)2]− with a pseudoaxial coordination environment afforded by two dianionic pentaphenyl borolide ligands. Variable-field magnetization data reveal open magnetic hysteresis up to 66 K, establishing 1 as a top-performing single-molecule magnet among its dysprosocenium analogues. Ac magnetic susceptibility data indicate that 1 relaxes via an Orbach mechanism above ∼80 K with Ueff = 1500(100) cm–1 and τ0 = 10–12.0(9) s, whereas Raman relaxation and quantum tunneling of the magnetization dominate at lower temperatures. Compound 1 exhibits a 100 s blocking temperature of 65 K, among the highest reported for dysprosium-based single-molecule magnets. Ab initio spin dynamics calculations support the experimental Ueff and τ0 values and enable a quantitative comparison of the relaxation dynamics of 1 and two representative dysprosocenium cations, yielding additional insights into the impact of the crystal field splitting and vibronic coupling on the observed relaxation behavior. Importantly, compound 1 represents a step toward the development of alternatives to substituted dysprosocenium single-molecule magnets with increased axiality.

Photoinduced Acylations Via Azolium-Promoted Intermolecular Hydrogen Atom Transfer.

Abstract: Photoinduced hydrogen atom transfer (HAT) has been developed as a powerful tool to generate synthetically valuable radical species. The direct photoexcitation of ketones has been known to promote HAT or to generate acyl radicals through Norrish-type pathways, but these modalities remain severely limited by radical side reactions. We report herein a catalyst- and transition metal-free method for the acylation of C-H bonds that leverages the unique properties of stable, isolable acyl azolium species. Specifically, acyl azolium salts are shown to undergo an intermolecular and regioselective HAT upon LED irradiation with a range of substrates bearing active C-H bonds followed by C-C bond formation to afford ketones. Experimental and computational studies support photoexcitation of the acyl azolium followed by facile intersystem crossing to access triplet diradical species that promote selective HAT and radical-radical cross-coupling.

Porphyrin-Based Covalent Organic Frameworks Anchoring Au Single Atoms for Photocatalytic Nitrogen Fixation.

Abstract: The development of efficient photocatalysts for N2 fixation to produce NH3 under ambient conditions remains a great challenge. Since covalent organic frameworks (COFs) possess predesignable chemical structures, good crystallinity, and high porosity, it is highly significant to explore their potential for photocatalytic nitrogen conversion. Herein, we report a series of isostructural porphyrin-based COFs loaded with Au single atoms (COFX-Au, X = 1-5) for photocatalytic N2 fixation. The porphyrin building blocks act as the docking sites to immobilize Au single atoms as well as light-harvesting antennae. The microenvironment of the Au catalytic center is precisely tuned by controlling the functional groups at the proximal and distal positions of porphyrin units. As a result, COF1-Au decorated with strong electron-withdrawing groups exhibits a high activity toward NH3 production with rates of 333.0 ± 22.4 μmol g-1 h-1 and 37.0 ± 2.5 mmol gAu-1 h-1, which are 2.8- and 171-fold higher than that of COF4-Au decorated with electron-donating functional groups and a porphyrin-Au molecular catalyst, respectively. The NH3 production rates could be further increased to 427.9 ± 18.7 μmol g-1 h-1 and 61.1 ± 2.7 mmol gAu-1 h-1 under the catalysis of COF5-Au featuring two different kinds of strong electron-withdrawing groups. The structure-activity relationship analysis reveals that the introduction of electron-withdrawing groups facilitates the separation and transportation of photogenerated electrons within the entire framework. This work manifests that the structures and optoelectronic properties of COF-based photocatalysts can be finely tuned through a rational predesign at the molecular level, thus leading to superior NH3 evolution.

Three-Component Donor-π-Acceptor Covalent-Organic Frameworks for Boosting Photocatalytic Hydrogen Evolution.

Abstract: Two-dimensional covalent-organic frameworks (2D COFs) have recently emerged as great prospects for their applications as new photocatalytic platforms in solar-to-hydrogen conversion; nevertheless, their inefficient solar energy capture and fast charge recombination hinder the improvement of photocatalytic hydrogen production performance. Herein, two photoactive three-component donor-π-acceptor (TCDA) materials were constructed using a multicomponent synthesis strategy by introducing electron-deficient triazine and electron-rich benzotrithiophene moieties into frameworks through sp2 carbon and imine linkages, respectively. Compared with two-component COFs, the novel TCDA-COFs are more convenient in regulating the inherent photophysical properties, thereby realizing outstanding photocatalytic activity for hydrogen evolution from water. Remarkably, the first sp2 carbon-linked TCDA-COF displays an impressive hydrogen evolution rate of 70.8 ± 1.9 mmol g-1 h-1 with excellent reusability in the presence of 1 wt % Pt under visible-light illumination (420-780 nm). Utilizing the combination of diversified spectroscopy and theoretical prediction, we show that the full π-conjugated linkage not only effectively broadens the visible-light harvesting of COFs but also enhances charge transfer and separation efficiency.

Rapid Interlayer Charge Separation and Extended Carrier Lifetimes due to Spontaneous Symmetry Breaking in Organic and Mixed Organic-Inorganic Dion-Jacobson Perovskites.

Abstract: Promising alternatives to three-dimensional perovskites, two-dimensional (2D) layered metal halide perovskites have proven their potential in optoelectronic applications due to improved photo- and chemical stability. Nevertheless, photovoltaic devices based on 2D perovskites suffer from poor efficiency owing to unfavorable charge carrier dynamics and energy losses. Focusing on the 2D Dion-Jacobson perovskite phase that is rapidly rising in popularity, we demonstrate that doping of complementary cations into the 3-(aminomethyl)piperidinium perovskite accelerates spontaneous charge separation and slows down charge recombination, both factors improving the photovoltaic performance. Employing ab initio nonadiabatic (NA) molecular dynamics combined with time-dependent density functional theory, we demonstrate that cesium doping broadens the bandgap by 0.4 eV and breaks structural symmetry. Assisted by thermal fluctuations, the symmetry breaking helps to localize electrons and holes in different layers and activates additional vibrational modes. As a result, the charge separation is accelerated. Simultaneously, the charge carrier lifetime grows due to shortened coherence time between the ground and excited states. The established relationships between perovskite composition and charge carrier dynamics provide guidelines toward future material discovery and design of perovskite solar cells.

Ionizable Lipid Nanoparticles for In Vivo mRNA Delivery to the Placenta during Pregnancy.

Abstract: Ionizable lipid nanoparticles (LNPs) are the most clinically advanced nonviral platform for mRNA delivery. While they have been explored for applications including vaccines and gene editing, LNPs have not been investigated for placental insufficiency during pregnancy. Placental insufficiency is caused by inadequate blood flow in the placenta, which results in increased maternal blood pressure and restricted fetal growth. Therefore, improving vasodilation in the placenta can benefit both maternal and fetal health. Here, we engineered ionizable LNPs for mRNA delivery to the placenta with applications in mediating placental vasodilation. We designed a library of ionizable lipids to formulate LNPs for mRNA delivery to placental cells and identified a lead LNP that enables in vivo mRNA delivery to trophoblasts, endothelial cells, and immune cells in the placenta. Delivery of this top LNP formulation encapsulated with VEGF-A mRNA engendered placental vasodilation, demonstrating the potential of mRNA LNPs for protein replacement therapy during pregnancy to treat placental disorders.

Molecular Engineering of pH-Responsive NIR Oxazine Assemblies for Evoking Tumor Ferroptosis via Triggering Lysosomal Dysfunction.

Abstract: Ferroptosis, a newly discovered form of regulated cell death, is emerging as a promising approach to tumor therapy. However, the spatiotemporal control of cell-intrinsic Fenton chemistry to modulate tumor ferroptosis remains challenging. Here, we report an oxazine-based activatable molecular assembly (PTO-Biotin Nps), which is capable of triggering the lysosomal dysfunction-mediated Fenton pathway with excellent spatiotemporal resolution via near-infrared (NIR) light to evoke ferroptosis. In this system, a pH-responsive NIR photothermal oxazine molecule was designed and functionalized with a tumor-targeting hydrophilic biotin-poly(ethylene glycol) (PEG) chain to engineer well-defined nanostructured assemblies within a single-molecular framework. PTO-Biotin Nps possesses a selective tropism to lysosome accumulation inside tumor cells, accommodated by its enhanced photothermal activity in the acidic microenvironment. Upon NIR light activation, PTO-Biotin Nps promoted lysosomal dysfunction and induced cytosolic acidification and impaired autophagy. More importantly, photoactivation-mediated lysosomal dysfunction via PTO-Biotin Nps was found to markedly enhance cellular Fenton reactions and evoke ferroptosis, thereby improving antitumor efficacy and mitigating systemic side effects. Overall, our study demonstrates that the molecular engineering approach of pH-responsive photothermal oxazine assemblies enables the spatiotemporal modulation of the intrinsic ferroptosis mechanism, offering a novel strategy for the development of metal-free Fenton inducers in antitumor therapy.

2D Mesoporous Zincophilic Sieve for High-Rate Sulfur-Based Aqueous Zinc Batteries.

Abstract: Sulfur-based aqueous zinc batteries (SZBs) attract increasing interest due to their integrated high capacity, competitive energy density, and low cost. However, the hardly reported anodic polarization seriously deteriorates the lifespan and energy density of SZBs at a high current density. Here, we develop an integrated acid-assisted confined self-assembly method (ACSA) to elaborate a two-dimensional (2D) mesoporous zincophilic sieve (2DZS) as the kinetic interface. The as-prepared 2DZS interface presents a unique 2D nanosheet morphology with abundant zincophilic sites, hydrophobic properties, and small-sized mesopores. Therefore, the 2DZS interface plays a bifunctional role in reducing the nucleation and plateau overpotential: (a) accelerating the Zn2+ diffusion kinetics through the opened zincophilic channels and (b) inhibiting the kinetic competition of hydrogen evolution and dendrite growth via the significant solvation-sheath sieving effect. Therefore, the anodic polarization is reduced to 48 mV at 20 mA cm-2, and the full-battery polarization is reduced to 42% of an unmodified SZB. As a result, an ultrahigh energy density of 866 Wh kgsulfur-1 at 1 A g-1 and a long lifespan of 10,000 cycles at a high rate of 8 A g-1 are achieved.