Journal ArticleDOI
3D printing of optimized composites with variable fiber volume fraction and stiffness using continuous fiber
Kentaro Sugiyama,Ryosuke Matsuzaki,Andrei V. Malakhov,Alexander N. Polilov,Masahito Ueda,Akira Todoroki,Yoshiyasu Hirano +6 more
TLDR
In this article, the authors optimized the curved fiber trajectories to realize variable fiber volume fraction and stiffness composites (VVfSC) using a continuous fiber composite 3D printer.About:
This article is published in Composites Science and Technology.The article was published on 2020-01-20. It has received 111 citations till now. The article focuses on the topics: Fiber & Volume fraction.read more
Citations
More filters
Journal ArticleDOI
FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments.
TL;DR: The most common defects on printed parts, in particular the void formation, surface roughness and poor bonding between fibre and matrix, are explored and an inclusive discussion on the effectiveness of chemical, laser, heat and ultrasound treatments to minimize these drawbacks is provided.
Journal ArticleDOI
Additive manufacturing of polymeric composites from material processing to structural design
TL;DR: In this paper, the authors provide a comprehensive guide to the stakeholders who want to utilize or develop an additive manufacturing process for polymeric composites and provide an outlook on future research opportunities on AM-fabricated composites from design to fabrication.
Journal ArticleDOI
3D Printing of Fibre-Reinforced Thermoplastic Composites Using Fused Filament Fabrication-A Review.
TL;DR: This review focuses on the enhanced mechanical performance obtained through the printing of fibre-reinforced polymer composites, using the fused filament fabrication (FFF) 3D printing technique.
Journal ArticleDOI
3D compaction printing of a continuous carbon fiber reinforced thermoplastic
Masahito Ueda,Shun Kishimoto,Masao Yamawaki,Ryosuke Matsuzaki,Akira Todoroki,Yoshiyasu Hirano,Antoine Le Duigou +6 more
TL;DR: In this paper, a hot compaction roller was equipped with a fused filament fabrication (FFF)-based 3D printer to reduce voids and improve adhesion between the filaments.
Journal ArticleDOI
Material extrusion additive manufacturing of continuous fibre reinforced polymer matrix composites: A review and outlook
TL;DR: The state-of-the-art of continuous fiber reinforced 3D printed composites (CF-3DP) is described in this article, where a detailed review of the materials and devices being used in the current studies is provided.
References
More filters
Journal ArticleDOI
3D-Printing of Lightweight Cellular Composites
TL;DR: A new epoxy-based ink is reported, which enables 3D printing of lightweight cellular composites with controlled alignment of multiscale, high-aspectratio fiber reinforcement to create hierarchical structures inspired by balsa wood.
Journal ArticleDOI
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
TL;DR: In this article, a carbon fiber reinforced plastic (CFRP) composite is used for Fused Deposition Modeling (FDM) of thermoplastic matrix CFRP composites.
Journal ArticleDOI
Highly oriented carbon fiber–polymer composites via additive manufacturing
Halil Tekinalp,Vlastimil Kunc,Gregorio M. Velez-Garcia,Chad E. Duty,Lonnie J. Love,Amit K. Naskar,Craig A. Blue,Soydan Ozcan +7 more
TL;DR: In this paper, the authors investigated the short fiber (02 mm to 04 mm) reinforced acrylonitrile-butadiene-styrene composites as a feedstock for 3D-printing in terms of their processibility, microstructure and mechanical performance.
Journal ArticleDOI
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation.
Ryosuke Matsuzaki,Masahito Ueda,Masaki Namiki,Tae Kun Jeong,Hirosuke Asahara,Keisuke Horiguchi,Taishi Nakamura,Akira Todoroki,Yoshiyasu Hirano +8 more
TL;DR: The technique enables direct 3D fabrication without the use of molds and may become the standard next-generation composite fabrication methodology.
Journal ArticleDOI
Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
TL;DR: In this article, a 3D printing based fabrication process of continuous fiber reinforced thermoplastic composites (CFRTPCs) was proposed, where continuous carbon fiber and PLA filament were utilized as reinforcing phase and matrix, respectively, and simultaneously fed into the fused deposition modeling (FDM)3D printing process.