scispace - formally typeset
Proceedings ArticleDOI

A fully differential CMOS integrated 4th order reconfigurable GM-C lowpass filter for mobile communication

U. Stehr, +3 more
- Vol. 1, pp 144-147
Reads0
Chats0
TLDR
A fully reconfigurable channel select filter is presented which is used as a part of a multi mode direct conversion receiver which supports different modes including GSM, IS-95, and UMTS.
Abstract
A fully reconfigurable channel select filter is presented which is used as a part of a multi mode direct conversion receiver. The filter supports different modes including GSM, IS-95, and UMTS. A 4/sup th/ order Butterworth filter is realized in a g/sub n/ C filter topology. The filter circuit is implemented in a standard 0.35 /spl mu/m CMOS process. The filter is able to handle large input signals up to 600mVpp at a supply voltage of 2.7V. The circuit has a low current consumption of 620/spl mu/A, whereas the needed die size is only 530520/spl mu/m.

read more

Citations
More filters
Proceedings ArticleDOI

Application of the PSO technique to the Optimization of CMOS Operational Transconductance Amplifiers

TL;DR: This paper optimize the folded cascode OTA performances, namely the static gain, the transition frequency, the common mode rejection ratio (CMRR), and the positive power-supply reject ratio (PSRR).
Proceedings ArticleDOI

UMTS/GSM multi mode receiver design

TL;DR: The work presented here focuses mainly on the receiver design, but in case of UMTS-FDD it also takes the interference from the transmitter into account and the boundary conditions for the transceiver IC are defined using specifications of currently available external components.
Proceedings ArticleDOI

A linearity and power efficient design strategy for architecture optimization of gm-C biquadratic filters

TL;DR: In this article, an efficient approach to design biquadratic sections for a low-pass baseband filter based on the gm-C architecture is presented, which completely determines the biquad's architecture level for linearity and power optimization.
Journal ArticleDOI

Fully-differential current-mode higher order filters using all grounded passive elements

TL;DR: The realization of nth order fully-differential current-mode filters using Current Differencing Current Conveyors (CDCC) has been presented which results in circuits employing all grounded passive elements and employs only one capacitor per pole.
References
More filters
Book

CMOS Circuit Design, Layout, and Simulation

TL;DR: Regardless of one's integrated circuit (IC) design skill level, this book allows readers to experience both the theory behind, and the hands-on implementation of, complementary metal oxide semiconductor (CMOS) IC design via detailed derivations, discussions, and hundreds of design, layout, and simulation examples.
Journal ArticleDOI

Active filter design using operational transconductance amplifiers: A tutorial

TL;DR: In this paper, the operational transconductance amplifier (OTA) is used in voltage-controlled amplifiers, filters, and impedances for continuous-time monolithic filters, where the total number of components used in these circuits is small, and the design equations and voltage-control characteristics are attractive.
Journal ArticleDOI

A 2-GHz wide-band direct conversion receiver for WCDMA applications

TL;DR: In this paper, a 2GHz direct conversion receiver for third-generation mobile communications using wideband code division multiple access achieves -114dBm sensitivity for 128-kb/s data at 4.096-Mcps spreading rate.
Journal ArticleDOI

A CMOS highly linear channel-select filter for 3G multistandard integrated wireless receivers

TL;DR: In this article, a 6-order Butterworth low-pass filter with 14-bit bandwidth tuning range is designed for implementing the baseband channel-select filter in an integrated multistandard wireless receiver.
Journal Article

State of the art and future trends

TL;DR: Machine Maintenance 2003 as discussed by the authors is a forward-looking, preventive maintenance program ensuring high machine availability at all times with a minimum risk of breakdown and regularity and transparency of the maintenance programme safeguard investment and secure a presence on the market.
Related Papers (5)