Open AccessBook
Explosive welding of metals and its application
Reads0
Chats0
About:
The article was published on 1982-01-01 and is currently open access. It has received 270 citations till now. The article focuses on the topics: Welding & Filler metal.read more
Citations
More filters
Journal ArticleDOI
Use of Emulsion Explosives in Experimental Studies of Flows in the Bonding Zone in Explosive Welding
TL;DR: In this article, two types of waves were found: large waves and small waves, which have not been observed in previous experiments, and empirical relations for calculating the wave size were proposed that take into account the influence of the strength and density of the colliding materials on them.
Journal ArticleDOI
Comparison of explosive welding of pure titanium/SUS 304 austenitic stainless steel and pure titanium/SUS 821L1 duplex stainless steel
TL;DR: In this article, the weldability window was used to analyze experimental phenomenon and the smoothed particle hydrodynamics (SPH) numerical simulation method is used to simulate the wavy interface.
Journal ArticleDOI
Experimental and physical model of the melting zone in the interface of the explosive cladding bar
TL;DR: In this paper, the thickness and morphology of the melting zone in the interface of the Ti/NiCr explosive cladding bar are investigated by means of optical microscopy, and it is shown that the distribution of melting zone is uniform and axisymmetric.
Journal ArticleDOI
Ultrahigh Cooling Rates at the Interface of Explosively Welded Materials and Their Effect on the Formation of the Structure of Mixing Zones
Ivan A. Bataev,Daria V. Lazurenko,Yu. N. Malyutina,A. A. Nikulina,Anatoly A. Bataev,O. E. Mats,Ivanna D. Kuchumova +6 more
TL;DR: In this paper, the formation of metastable phases in steel-steel, Ta-steel and Nb-Al joints is analyzed and the cooling rates of these materials in the mixing zones are estimated.
Journal ArticleDOI
Examination of Joint Integrity in parallel plate configuration of explosive welded SS-Al combination
Bir Bahadur Sherpa,Abhishek Upadhyay,Sandeep Kumar,Vikash mangla,Pal Dinesh Kumar,Arun Agarwal +5 more
TL;DR: In this article, the authors have evaluated the joint obtained by joining of Aluminium and Stainless Steel using explosive welding process through ram tensile testing method and soundness of joints analysed using Ultrasonic Flaw Detector.