Journal ArticleDOI
Measurement and optimization of surface roughness and tool wear via grey relational analysis, TOPSIS and RSA techniques
Reads0
Chats0
TLDR
In this paper, a study to analyze the turning properties of magnesium alloy AZ91D in dry condition with polycrystalline diamond (PCD) cutting inserts is presented, which shows that feed rate and cutting speed are the dominant factors for surface roughness and tool flank wear respectively.About:
This article is published in Measurement.The article was published on 2016-01-01. It has received 96 citations till now. The article focuses on the topics: Surface roughness & Tool wear.read more
Citations
More filters
Journal ArticleDOI
Kriging versus Bezier and regression methods for modeling and prediction of cutting force and surface roughness during high speed edge trimming of carbon fiber reinforced polymers
TL;DR: Investigation into the use of parametric models as an alternative approximation technique for modeling cutting force and surface roughness during high speed edge trimming of CFRP shows that Bezier models outperform regression models and can be used as alternative for modeling and prediction of machining responses.
Journal ArticleDOI
Magnesium alloy machining and its methodology: A systematic review and analyses
R. Venkatesh,SV Sivachandran,Thirupathy Maridurai,Shunmugam Baskar,N. Sivashankar,Roshini Arivazhagan +5 more
TL;DR: In this paper , the authors indicate the possible research methodology and its results of Mg alloys under various circumstances and show that Mg Alloys application was extended in structural applications in aircraft, gear box, laptops, mobile applications, chain saws etc.
Journal ArticleDOI
Measurement and optimization of multi-attribute characteristics in milling epoxy granite composites using rsm and combined ahp-topsis
TL;DR: In this article , an analytical hierarchy procedure (AHP-TOPSIS algorithm was used to determine the optimal machining conditions for epoxy granite composites with three levels of input parameters: speed, fiber content, and feed rate.
Journal ArticleDOI
Performance Analysis of Trihexyltetradecylphosphonium Chloride Ionic Fluid under MQL Condition in Hard turning
TL;DR: In this article, an overall performance-based analysis of Trihexyltetradecylphosphonium chloride ionic fluid mixed with organic coconut oil (OCO) during turning of hardened D2 steel was presented.
Journal ArticleDOI
Optimization of cutting parameters with Taguchi and grey relational analysis methods in MQL-assisted face milling of AISI O2 steel
Bilal Kursuncu,Yasin Ensar Biyik +1 more
TL;DR: In this article, the authors examined the usability of environmentally harmless vegetable oil in the minimum quantity of lubrication (MQL) system in face milling of AISI O2 steel and to optimize the cutting parameters by different statistical methods.
References
More filters
Journal ArticleDOI
Introduction to Grey system theory
TL;DR: The Grey Systeni and its applications are interdisciplinary, cutting across a variety of specialized fields, and it is evident that Grey System theory stands the test of time since 1982 as mentioned in this paper.
Journal ArticleDOI
Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications
Jürgen Hirsch,Talal Al-Samman +1 more
TL;DR: In this article, the basic mechanisms of texture formation of aluminum and magnesium alloys during wrought processing are described and the major aspects and differences in deformation and recrystallization mechanisms are discussed.
Journal ArticleDOI
Research for a new age of magnesium in the automotive industry
H Friedrich,S Schumann +1 more
TL;DR: In this paper, the authors present research strategies for bringing about a new age of magnesium by means of the vehicle modules drive train, interior, body and chassis, differentiated according to the time frame and conceivable likelihood of realisation.
Book
Taguchi techniques for quality engineering : loss function, orthogonal experiments, parameter and tolerance design
TL;DR: The Economics of Reducing Variation The design of Experiment Process as discussed by the authors is a well-known technique for reducing variance in the design of experiment process and is used in many experiments.
Journal ArticleDOI
Manufacturing of Lightweight Components by Metal Forming
TL;DR: In this article, the current and future contributions of forming technology to the manufacture of lightweight components and structures have been discussed, as well as the issues that arise in the production of load adapted designs and using high strength materials.