scispace - formally typeset
Book ChapterDOI

Mesoporous Materials Produced from Hydrothermally Synthesized Hectorites

TLDR
In this paper, the mesoporous material from a precursory hectorite synthesized at 150°C has a total specific surface area of 848 m 2 g − 1, a pore volume of 0.98 cm 3 g −1 and an pore average diameter of 46 A, values which are significantly higher than those of conventional pillared clays.
Abstract
Novel mesoporous materials having exceptionally large pores were produced from hydrothermally synthesized silicate-bearing hectorites. Experiments suggest that interlayer anisotropic silicates act as larger pillars. Method of preparing such materials is described, together with their porous properties. The mesoporous material from a precursory hectorite synthesized at 150°C has a total specific surface area of 848 m 2 g −1 , a pore volume of 0.98 cm 3 g −1 and an pore average diameter of 46 A, values which are significantly higher than those of conventional pillared clays.

read more

Citations
More filters
Journal ArticleDOI

Synthesis of titania-pillared hydrogen tetratitanate nanocomposites and control of slit width

TL;DR: In this article, a slit-width-controlled H2Ti4O9/TiO2 nanocomposites were fabricated by stirring with (CnH2n+1NH3)2Ti 4O9 and a titanyl acylate complex at 20 °C for 48 h followed by UV light irradiation from a 450 W high-pressure mercury lamp.
Book ChapterDOI

Synthetic Hectorite: Preparation, Pillaring and Applications in Catalysis

TL;DR: In this article, a comprehensive and critical overview on the preparation of hectorite-like solids, pillaring, properties and catalytic applications of pillared interlayered synthetic hectorites (PILCs).
Journal ArticleDOI

Hydrothermal Synthesis of Interstratified Lizardite/Saponite

TL;DR: In this paper, a novel interstratified lizardite/saponite which has never been found in nature is hydrothermally synthesized from uniform Si-Al-Mg gels at 300°C.
Journal ArticleDOI

Comparison between Torsional Oscillator and Ultrasonic Measurements of 4 He Confined in Nano-Porous Media

TL;DR: In this paper, a torsional oscillator and ultrasonic measurements for 4He confined in 2D nano-porous substrate, hectorite, were performed, and it was shown that the resonance frequency increases rapidly just below a superfluid transition temperature (TC), and then becomes constant at the lower temperature.
Journal ArticleDOI

Mechanical responses of helium films adsorbed on two-dimensional mesoporous hectorite

TL;DR: In this paper, the sound velocity and attenuation of mesoporous hectorite pellet adsorbed by both 4 He and 3 He submonolayer films were investigated.
References
More filters
Journal ArticleDOI

Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity (Recommendations 1984)

TL;DR: Mise au point comportant des definitions generales et la terminologie, la methodologie utilisee, les procedes experimentaux, les interpretations des donnees d'adsorption, les determinations de l'aire superficielle, and les donnes sur la mesoporosite et la microporosite.
Journal ArticleDOI

Studies on pore systems in catalysts: V. The t method

TL;DR: In this paper, the experimental volumes of adsorbed nitrogen, V a − t, as a function of the statistical thickness, t, of the adorbed layer, were plotted, together with the experimental adsorption and desorption isotherm.
Journal ArticleDOI

Characterization of clays by organic compounds

TL;DR: In this article, four clay-organic reactions are used: staining tests and dye adsorption, glycerol and glycol adaption, intercalation, and alkylammonium ion exchange.
Journal ArticleDOI

Synthesis and Properties of Titanium Oxide Cross-Linked Montmorillonite

TL;DR: In this article, a cross-linked montmorillonite was introduced by cation exchange with polymeric Ti cations, formed by partial hydrolysis of TiCl4 in HCl.
Related Papers (5)