Optimization of Wear Performance of Aa 5083/10 Wt. % Sicp Composites Using Taguchi Method☆
Reads0
Chats0
TLDR
In this paper, the performance of 10% SiC reinforced Al-5083 AMMCs was investigated by using Pin-on-Disk wear test rate with normal loads of 10N, 20N, 30N, sliding distance 754 m, 1131 m, 1508 m, and sliding velocity 0.42 m/s, 0.63 m/S, and 0.84m/S at constant time 30minutes.About:
This article is published in Procedia Materials Science.The article was published on 2014-01-01 and is currently open access. It has received 58 citations till now. The article focuses on the topics: Taguchi methods & Metal matrix composite.read more
Citations
More filters
Journal ArticleDOI
Wear behaviour analysis on aluminium alloy 7050 with reinforced SiC through taguchi approach
T. Sathish,S. Karthick +1 more
TL;DR: In this article, the AA7050 aluminium alloy is used as a base material with reinforcement of Silicon Carbide (SiC) at various percentage level like 0, 4 % and 6 %.
Journal ArticleDOI
Optimization of wear parameters using Taguchi grey relational analysis and ANN-TLBO algorithm for silicon nitride filled AA6063 matrix composites
Journal ArticleDOI
Investigation of rare earth particulate on tribological and mechanical properties of Al-6061 alloy composites for aerospace application
Vipin Kumar Sharma,Vipin Kumar Sharma,Vinod Kumar,Vinod Kumar,Ravinder Singh Joshi,Ravinder Singh Joshi +5 more
TL;DR: In this paper, rare earth particulate (REP) reinforced hybrid aluminium matrix composites processed by stir casting route were used to characterize the prepared samples of Al-6061 hybrid composites.
Journal ArticleDOI
Material characterization and unconventional machining on synthesized Niobium metal matrix
C. Sivakandhan,Ganesh Babu Loganathan,G. Murali,P. Suresh Prabhu,S Marichamy,G. Sai Krishnan,Raghuram Pradhan +6 more
TL;DR: In this article, the authors developed a niobium-based metal matrix alloy through sintering based powder metallurgy technique and the 2, 4 and 6 weight percentage of Titanium Carbide (TiC) is added to the alloy.
Journal ArticleDOI
Prediction of mechanical properties and modeling on sliding wear behavior of LM25/TiC composite using response surface methodology
N. Radhika,R. Raghu +1 more
TL;DR: In this article, a central composite design based on response surface methodology (RSM) under the influence of wear process parameters such as applied load, sliding velocity and sliding distance is presented.
References
More filters
Journal ArticleDOI
Composites of aluminium alloys: fabrication and wear behaviour
TL;DR: In this paper, a process for fabrication of aluminium-alloy composites containing paniculate non-metals, the net shape forming of these composites, their microstructures, their friction and wear behaviours and their mechanical properties are described.
Book
Taguchi on Robust Technology Development: Bringing Quality Engineering Upstream
TL;DR: TAGUCHI as discussed by the authors brings quality engineering upstream asme press series on international PDF is available at our online library, with complete resources, you could find taguchi on robust technology development bringing QUALITY ENGINEERing upstREAM ASME PRESS SERIES on INTERNATIONAL PDF.
Journal ArticleDOI
Solidification, structures, and properties of cast metal-ceramic particle composites
TL;DR: In this paper, solidification synthesis of cast metal-ceramic particle composite materials by dispersing hard or soft ceramic particles (including microballoons) and short fibres in molten alloys before solidification is described.
Related Papers (5)
Optimization of wear behaviour on AA6061/Al2O3/SiC metal matrix composite using squeeze casting technique – Statistical analysis
L. Natrayan,M. Senthil Kumar +1 more
Dry Sliding Wear Behaviour of Aluminium/Be 3 Al 2 (SiO 3 ) 6 Composite Using Taguchi Method
H. B. Bhaskar,Abdul Sharief +1 more