Journal ArticleDOI
Polymer modified asphalt binders
TLDR
A review of research that has been conducted on polymer modified binders over the last three decades can be found in this paper, where the elastic recovery test is good at determining the presence of polymers in an asphalt binder but is less successful at predicting field performance of the pavement.About:
This article is published in Construction and Building Materials.The article was published on 2007-01-01. It has received 836 citations till now. The article focuses on the topics: Asphalt.read more
Citations
More filters
Journal ArticleDOI
Fundamental and rheological properties of oil palm fruit ash modified bitumen
TL;DR: In this article, the suitability of using oil palm fruit ash (OPFA) as a bitumen modifier was investigated by means of conventional as well as dynamic mechanical analysis using dynamic shear rheometer (DSR), bending beam rheometers (BBR), and direct tension test (DTT).
Journal ArticleDOI
A simple treatment of electronic-waste plastics to produce asphalt binder additives with improved properties
Mohd Rosli Mohd Hasan,Baron Colbert,Zhanping You,Ali Jamshidi,Patricia A. Heiden,Meor Othman Hamzah +5 more
TL;DR: In this article, the performance of e-waste modified asphalt binders was evaluated using a #50 sieve with a conventional asphalt binder, PG58-28 binder.
Journal ArticleDOI
Aging properties and mechanism of the modified asphalt by packaging waste polyethylene and waste rubber powder
TL;DR: In this paper, retrieved packaging waste polyethylene and waste rubber powder were selected as modifiers to modify the ordinary oil asphalt, and the rotating film oven test was adopted to study the aging process of the modified asphalt.
Journal ArticleDOI
Influence of soft bitumens on the chemical and rheological properties of reclaimed polymer-modified binders from the "old" surface-layer asphalt
TL;DR: In this paper, the influence of soft virgin bitumens on the chemical and rheological properties of three reclaimed PMBs from different "old" surface-layer asphalt mixtures in Europe was investigated.
Journal ArticleDOI
Effects of warm mix asphalt additives on performance properties of polymer modified asphalt binders
TL;DR: In this article, the performance properties of polymer modified asphalt (PMA) binders containing warm mix asphalt (WMA) additives were evaluated using rotational viscometer (RV), dynamic shear rheometer (DSR), and bending beam rheometers (BBR).
References
More filters
Journal Article
Polymer modified asphalt
TL;DR: In this paper, the authors present an overview of the characteristics of polymerasphalt binders, mostly used in the paving industry, focusing on the relationships of composition and formulation with the properties of the binder, and the relationship of binder properties and performance of the mixture.
Journal ArticleDOI
Asphalt modified by styrene-butadiene-styrene triblock copolymer: Morphology and model
TL;DR: In this paper, the styrene-butadiene-styrene (SBS! triblock copolymer) was used to modify the asphalt binder and the morphology and engi- neering properties of the binders were investigated using transmission electron microscopy and dynamic shear rheometer.
Journal ArticleDOI
Polymer-Modified Asphalt Cements Used in the Road Construction Industry: Basic Principles
TL;DR: In this paper, the basic principles of bitumen-polymer compatibility, the mechanism for modification, and the effect of the components on the properties of the modified binders are presented along with several specific problems related to the use of these products.
Classification of asphalt binders into simple and complex binders
TL;DR: The NCHRP 9-10 Project as mentioned in this paper evaluated the suitability of using the Superpave binder and mixture test system for modified asphalt binders, and the results indicated that modified binders will be used more in the future and that there are major concerns regarding the applicability of the superpave PG-grading system to modified asphalt binder.
Journal ArticleDOI
Characteristics of polymers and polymer-modified binders
TL;DR: In this article, the properties of a number of polymers commonly proposed for polymer-modified bitumens (PMBs) were studied to suggest a way to select the polymer suitable for the required application; the prediction of the performance in the final application would allow bypass of the tests on PMBs and asphalt mixtures.