Journal ArticleDOI
Polymer modified asphalt binders
TLDR
A review of research that has been conducted on polymer modified binders over the last three decades can be found in this paper, where the elastic recovery test is good at determining the presence of polymers in an asphalt binder but is less successful at predicting field performance of the pavement.About:
This article is published in Construction and Building Materials.The article was published on 2007-01-01. It has received 836 citations till now. The article focuses on the topics: Asphalt.read more
Citations
More filters
Journal ArticleDOI
Investigation of aging performance of SBS modified asphalt with various aging methods
TL;DR: In this article, two kinds of base asphalts (penetration 70 and 90) were used for preparing styrene-butadiene-styrene block copolymers (SBS) modified asphalms, and the effects of each aging method on the physical characteristics, rheological property and chemical composition of the binders were studied.
Journal ArticleDOI
Nanoclay application to asphalt concrete: Characterization of polymer and linear nanocomposite-modified asphalt binder and mixture
TL;DR: In this article, the performance of nanoclay and nanocomposite-engineered asphalt mixtures were evaluated and the benefits of nano engineering in asphalt binder and asphalt mixture were discussed.
Journal ArticleDOI
A review on using crumb rubber in reinforcement of asphalt pavement.
TL;DR: A critical review on the use of crumb rubber in reinforcement of asphalt pavement will be presented and the effects of CRM on the stiffness, rutting, and fatigue resistance of road pavement construction are reviewed.
Journal ArticleDOI
8-Hydroxyquinoline based chitosan derived carbohydrate polymer as biodegradable and sustainable acid corrosion inhibitor for mild steel: Experimental and computational analyses.
Mohamed Rbaa,Meriem Fardioui,Chandrabhan Verma,Ashraf S. Abousalem,M. Galai,E.E. Ebenso,Taoufiq Guedira,Brahim Lakhrissi,Ismail Warad,Abdelkader Zarrouk +9 more
TL;DR: Corrosion inhibition efficiencies and adsorption behavior of the CH and CH-HQ was supported by UV-visible (UV-vis) spectrophotometric analyses, and Monte Carlo simulations and density functional theory calculations were carried out to corroborate the experimental results.
Journal ArticleDOI
A review on low temperature performances of rubberized asphalt materials
TL;DR: In this article, the low temperature properties of crumb rubber modified binder (CRMB) are governed by the factors such as asphalt properties, crumbs rubber properties, mixing temperature, mixing time, mixing type and admixture.
References
More filters
Journal Article
Polymer modified asphalt
TL;DR: In this paper, the authors present an overview of the characteristics of polymerasphalt binders, mostly used in the paving industry, focusing on the relationships of composition and formulation with the properties of the binder, and the relationship of binder properties and performance of the mixture.
Journal ArticleDOI
Asphalt modified by styrene-butadiene-styrene triblock copolymer: Morphology and model
TL;DR: In this paper, the styrene-butadiene-styrene (SBS! triblock copolymer) was used to modify the asphalt binder and the morphology and engi- neering properties of the binders were investigated using transmission electron microscopy and dynamic shear rheometer.
Journal ArticleDOI
Polymer-Modified Asphalt Cements Used in the Road Construction Industry: Basic Principles
TL;DR: In this paper, the basic principles of bitumen-polymer compatibility, the mechanism for modification, and the effect of the components on the properties of the modified binders are presented along with several specific problems related to the use of these products.
Classification of asphalt binders into simple and complex binders
TL;DR: The NCHRP 9-10 Project as mentioned in this paper evaluated the suitability of using the Superpave binder and mixture test system for modified asphalt binders, and the results indicated that modified binders will be used more in the future and that there are major concerns regarding the applicability of the superpave PG-grading system to modified asphalt binder.
Journal ArticleDOI
Characteristics of polymers and polymer-modified binders
TL;DR: In this article, the properties of a number of polymers commonly proposed for polymer-modified bitumens (PMBs) were studied to suggest a way to select the polymer suitable for the required application; the prediction of the performance in the final application would allow bypass of the tests on PMBs and asphalt mixtures.