scispace - formally typeset
Open AccessJournal ArticleDOI

The pore size of polycaprolactone scaffolds has limited influence on bone regeneration in an in vivo model

Reads0
Chats0
TLDR
Pore sizes between 350 and 800 microm play a limited role in bone regeneration in this tissue engineering model, and it may be advantageous to explore the effects of other scaffold structural properties, such as pore shape, pore interconnectivity, or scaffold permeability, on bone regeneration when designing PCL scaffolds for bone tissue engineering.
Abstract
Bone tissue engineering scaffolds should be designed to optimize mass transport, cell migration, and mechanical integrity to facilitate and enhance new bone growth. Although many scaffold parameters could be modified to fulfill these requirements, pore size is an important scaffold characteristic that can be rigorously controlled with indirect solid freeform fabrication. We explored the effect of pore size on bone regeneration and scaffold mechanical properties using polycaprolactone (PCL) scaffolds designed with interconnected, cylindrical orthogonal pores. Three scaffold designs with unique microarchitectures were fabricated, having pore sizes of 350, 550, or 800 μm. Bone morphogenetic protein-7 transduced human gingival fibroblasts were suspended in fibrin gel, seeded into scaffolds, and implanted subcutaneously in immuno-compromised mice for 4 or 8 weeks. We found that (1) modulus and peak stress of the scaffold/bone constructs depended on pore size and porosity at 4 weeks but not at 8 weeks, (2) bone growth inside pores depended on pore size at 4 weeks but not at 8 weeks, and (3) the length of implantation time had a limited effect on scaffold/bone construct properties. In conclusion, pore sizes between 350 and 800 μm play a limited role in bone regeneration in this tissue engineering model. Therefore, it may be advantageous to explore the effects of other scaffold structural properties, such as pore shape, pore interconnectivity, or scaffold permeability, on bone regeneration when designing PCL scaffolds for bone tissue engineering. © 2009 Wiley Periodicals, Inc. J Biomed Mater Res, 2010

read more

Content maybe subject to copyright    Report

Citations
More filters
Journal ArticleDOI

The effect of mean pore size on cell attachment, proliferation and migration in collagen–glycosaminoglycan scaffolds for bone tissue engineering

TL;DR: The results show that cell number was highest in scaffolds with the largest pore size, which was deemed optimal for bone tissue engineering, and an added advantage of the larger pores is a reduction in cell aggregations that develop along the edges of the scaffolds.
Journal ArticleDOI

Poly-є-caprolactone based formulations for drug delivery and tissue engineering: A review

TL;DR: This review aims to provide an up to date of drugs incorporated in different PCL based formulations, their purpose and brief outcomes.
Journal ArticleDOI

3D bioactive composite scaffolds for bone tissue engineering.

TL;DR: This review will consider the ideal properties of bioactive composite 3D scaffolds and examine recent use of polymers, hydrogels, metals, ceramics and bio-glasses in BTE.
Journal ArticleDOI

Understanding the effect of mean pore size on cell activity in collagen-glycosaminoglycan scaffolds

TL;DR: Recent investigations into the effect of mean pore size in collagen-glycosaminoglycan scaffolds with pore sizes ranging from 85–325 μm are discussed and how it has provided an insight into the divergence within the literature.
Journal ArticleDOI

Chitosan-based scaffolds for bone tissue engineering

TL;DR: This review discusses the fundamentals of bone tissue engineering and the unique properties of chitosan as a scaffolding material to treat bone defects for hard tissue regeneration, and discusses the influence of material preparation and addition of polymeric or ceramic components or biomolecules on chitOSan scaffold properties such as mechanical strength, structural integrity, and functional bone regeneration.
References
More filters
Journal ArticleDOI

Porosity of 3D biomaterial scaffolds and osteogenesis.

TL;DR: New fabrication techniques, such as solid-free form fabrication, can potentially be used to generate scaffolds with morphological and mechanical properties more selectively designed to meet the specificity of bone-repair needs.
Journal ArticleDOI

Scaffolds in tissue engineering bone and cartilage.

TL;DR: Research on the tissue engineering of bone and cartilage from the polymeric scaffold point of view is reviews from a biodegradable and bioresorbable perspective.
Journal ArticleDOI

Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering.

TL;DR: The integration of scaffold computational design and free-form fabrication techniques presented here could prove highly useful for the construction of scaffolds that have anatomy specific exterior architecture derived from patient CT or MRI data and an interior porous architecturederived from computational design optimization.
Journal ArticleDOI

Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling

TL;DR: FDM allows the design and fabrication of highly reproducible bioresorbable 3D scaffolds with a fully interconnected pore network and shows that fibroblasts and osteoblast-like cells can proliferate, differentiate, and produce a cellular tissue in an entirely interconnected 3D polycaprolactone matrix.
Journal ArticleDOI

Potential of ceramic materials as permanently implantable skeletal prostheses

TL;DR: High-fired calcium aluminate samples in the form of quarter-inch diameter cylindrical pellets containing interconnecting porous networks were implanted in vivo into canine femurs for 4, 11, and 22-week periods, showing the ceramic samples to be bound lightly by natural bone and gave no detectable signs of tissue incompatibility.
Related Papers (5)
Trending Questions (1)
How pore sizes affect bone tissue engineering?

The paper states that pore sizes between 350 and 800 μm in polycaprolactone (PCL) scaffolds have a limited effect on bone regeneration in a tissue engineering model. Other scaffold structural properties may have a greater impact.