scispace - formally typeset
Search or ask a question

How do you connect two amplifiers in parallel? 

Optical amplifier
Distributed amplifier
Noise figure
Direct-coupled amplifier
Amplifier

Answers from top 14 papers

More filters
Papers (14)Insight
Journal Article•DOI
A new treatment of the RC parallel-T network
K. Posel
01 Jan 1963
With regard to the use of the network in the feedback path of amplifiers it is shown that the unbalanced version of the parallel-T has distinct advantages.
Journal Article•DOI
Analysis of gain characteristics of bi-directionally pumped praseodymium-doped fiber amplifiers
Yasutake Ohishi, Makoto Yamada, Terutoshi Kanamori, Yukio Terunuma, Shoichi Sudo 
01 Apr 1996-IEEE Photonics Technology Letters
7 Citations
An asymmetric pumping configuration is effective in constructing booster amplifiers.
Journal Article•DOI
Experiments with active phase matching of parallel-amplified Multiline HF laser beams by a phase-locked Mach-Zehnder interferometer.
J. G. Coffer, Jay M. Bernard, Richard A. Chodzko, E. B. Turner, R. Gross, W. R. Warren 
01 Jan 1983-Applied Optics
14 Citations
The techniques developed have potential for measuring dispersion mismatch between larger parallel amplifiers.
Open access•Proceedings Article•DOI
Class-B balanced single-ended dual-fed distributed power amplifier
O. Kyaw, Kimberley W. Eccleston 
17 Aug 2002
In this paper we demonstrate that a balanced amplifier employing two single-ended dual-fed distributed amplifiers can operate effectively under class-B operation.
Open access•Journal Article•DOI
Dual-band impedance transformation networks for integrated power amplifiers
Robert Wolf, Niko Joram, Stefan Schumann, Frank Ellinger 
01 Feb 2016-International Journal of Microwave and Wireless Technologies
6 Citations
This paper shows that the two most common impedance transformation networks for power amplifiers (PAs) can be designed to achieve optimum transformation at two frequencies.
Proceedings Article•DOI
Modeling parallel amplifiers
Howard Hausman
01 Nov 2015
The use of parallel amplifiers require a different analysis than that of passive parallel circuits because the signals in the parallel paths are coherent but the noise produced is not coherent and therefore recombines differently than signals.
Journal Article•DOI
Phase compensation of the three op amp instrumentation amplifier
D. R. White
01 Sep 1987-IEEE Transactions on Instrumentation and Measurement
11 Citations
It is shown that the two input-stage amplifiers of the conventional circuit should be compensated for unity gain.
Open access•Journal Article•DOI
InP DHBT Distributed Amplifiers With Up to 235-GHz Bandwidth
Klas Eriksson, Izzat Darwazeh, Herbert Zirath 
02 Mar 2015-IEEE Transactions on Microwave Theory and Techniques
37 Citations
To the authors' best knowledge, the single-stage DA and the two-cascaded single-stage DA are the widest band amplifiers in any technology reported to date.
Proceedings Article•DOI
28 GHz >250 mW CMOS Power Amplifier Using Multigate-Cell Design
Jefy A. Jayamon, James F. Buckwalter, Peter M. Asbeck 
02 Nov 2015
19 Citations
To the authors' knowledge, the output power is the best reported in silicon for this frequency range, for amplifiers that do not use elaborate power-combining approaches.
Journal Article•DOI
Two‐wire AGC amplifiers with echo cancellers for two‐way voice signals
Hiroshi Yasukawa
01 Jan 1993-Electronics and Communications in Japan Part I-communications
The configuration and algorithms proposed in the paper are proven to be effective for two-wire amplifiers.
Proceedings Article•DOI
50 GHz high output voltage distributed amplifiers for 40 Gb/s EO modulator driver application
Cindy Yuen, Kirk Laursen, Duc Chu, K. Mar 
02 Jun 2002
16 Citations
These amplifiers are suitable for use In fiber-optic communication systems.
Journal Article•DOI
Theory of two-section laser amplifiers
Michael J. Adams
01 Jan 1989-Optical and Quantum Electronics
12 Citations
The implication is that the advantages claimed for two-section amplifiers over single-section devices may not be as great as had hitherto been thought.
Journal Article•DOI
Demonstration of 184 and 255-GHz Amplifiers Using InP HBT Technology
Vesna Radisic, Donald J. Sawdai, Dennis W. Scott, William R. Deal, L. Dang, Danny Li, A. Cavus, Andy Fung, Lorene Samoska, R. To, T. C. Gaier, Richard Lai 
31 Mar 2008-IEEE Microwave and Wireless Components Letters
27 Citations
Both amplifiers show excellent agreement with original simulation.
Journal Article•DOI
Two digitally programmable gain amplifiers based on current conveyors
Krit Angkeaw, Pipat Prommee 
01 May 2011-Analog Integrated Circuits and Signal Processing
19 Citations
The results show that the operations of two proposed amplifiers are in accordance with the theories.

Related Questions

How to connect a signal generator to an amplifier?9 answers
How to connect amplifier in series?8 answers
How to connect amplifier to DVD player and TV?10 answers
How to connect echo mixer to amplifier?10 answers
How to connect multiple speakers to one amplifier?10 answers
How to connect two Ahuja amplifiers together?8 answers

See what other people are reading

Can i just weigh ash residue and call ti ash content?
5 answers
Weighing ash residue alone is not sufficient to accurately determine ash content. Various methods exist to measure ash content accurately. For instance, X-ray techniques can rapidly and precisely measure ash content in samples by analyzing X-ray intensity through a logarithmic amplifier. Additionally, high-temperature ash levels in coal can be estimated with low error using methods like Fast Neutron Activation Analysis or X-Ray Fluorescence, which correlate Si content with ash content. Furthermore, a system utilizing X-ray absorption spectra can determine the relative material composition of ash content in paper products by analyzing absorption at different energy levels. Therefore, relying solely on weighing ash residue may not provide the comprehensive and precise ash content measurement that these advanced techniques can offer.How do proximity sensor using infra redwork?
4 answers
Proximity sensors utilizing infrared technology work by emitting infrared radiation and then detecting the reflection of this radiation off objects within their detection range. These sensors consist of an infrared emitter to radiate infrared rays, a receiver to capture the reflected rays, and sometimes a filter to modify the detection width. In the case of infra-red proximity fuze systems, the sensors are designed to be sensitive to specific types of radiation, such as that emitted by the skin of a target due to kinetic heating, while being insensitive to other sources like jet-exhaust plume radiation. Additionally, proximity sensing apparatus can involve inductive sensors, resistors, oscillators, and amplifiers to detect changes in amplitude and phase of the current signal when an object approaches the sensor.How are portable ecg made and what type of electrode is used?
4 answers
Portable ECG devices are made using various types of electrodes such as dry electrodes and capacitive electrodes. Dry electrodes are flexible and can be used for long-term monitoring, offering an alternative to traditional gel electrodes. Capacitive electrodes, on the other hand, are utilized in portable ECG designs for heart rate monitoring, where electrodes are placed on a plastic sheet under the patient's back and processed through signal-conditioning circuits before being displayed on an LCD screen. These electrodes provide comfort, reusability, and accurate heart rate measurements, making them suitable for wearable ECG applications. The development of portable ECG devices with different electrode types aims to enhance convenience, accuracy, and long-term monitoring capabilities for users concerned about their cardiovascular health.Is the target ppm value for fishpond 300-400?
4 answers
The target ppm value for a fishpond typically involves monitoring various water quality parameters to ensure optimal conditions for aquatic life. Fishpond monitoring systems integrate sensors like temperature, pH, turbidity, and oxygen content detectors to maintain suitable water quality. These systems enable real-time data acquisition and remote monitoring, allowing for automatic adjustments to balance oxygen levels and ensure water quality. By utilizing microprocessors, cameras, and oxygen generators, these systems help in reducing labor costs and guaranteeing good water quality for fish breeding. Therefore, while the specific ppm range may vary based on the fish species and pond conditions, continuous monitoring and control systems play a crucial role in maintaining the desired water quality levels within the fishpond.Class a class b?
5 answers
Class A and Class B are terms used in various fields, including amplifier design, optical links, psychophysics, and antibiotic resistance detection. In amplifier design, Class-B amplifiers focus on high power output and efficiency, often utilizing resistive and tuned loads for optimal performance. In optical links, a Class-B system demonstrates high linearity and signal power with minimized noise levels, enhancing dynamic range. Psychophysical observations differentiate between Class A, which relates to discriminability of stimuli, and Class B, which pertains to the appearance of stimuli and observer biases, crucial for studying illusions and context effects. Moreover, in antibiotic resistance detection, Class B CPE involves challenging-to-detect resistance mechanisms, where modified testing methods show improved sensitivity and specificity for ESBL detection.What is the AMPPro?
4 answers
The AMPPro, also known as the Amputee Mobility Predictor, is a tool used to assess the mobility and functional ability of lower limb amputees. Research indicates a positive correlation between AMPPro scores and perceived mobility, with higher functional mobility leading to higher perceived mobility. Additionally, age and the cause of amputation were found to influence mobility levels, with traumatic/tumor amputations showing higher AMPPro and perceived mobility scores compared to dysvascular/infection causes. The AMPPro is crucial in evaluating the impact of proposed Medicare policy changes on access to care for lower limb amputees, as it helps project how such changes could affect patients at different levels of functional mobility.Create a checklist on how to test a PNP transistor?
5 answers
To test a PNP transistor, follow this checklist: Bias the transistor to non-linearity using a harmonic-free alternating signal and compare the base and collector currents at higher harmonics to determine the beta value. Establish continuity test circuits to detect short circuits between the base and emitter or emitter and collector, and measure the collector current at a specific base to collector bias with the emitter open. Use an amplifier tuned to the second harmonic of the oscillator frequency and a detector to analyze the collector to base load voltages for beta measurement. Test for base to emitter short circuits by disconnecting the base from the oscillator and connecting it to a resistor while applying negative bias to the emitter. Measure the collector current I CB0 by breaking the emitter circuit and connecting the meter directly to the base.What is TCAD?
5 answers
TCAD, which stands for Technology Computer-Aided Design, is a crucial tool for designing and simulating semiconductor devices. It allows for the creation of models based on current technology nodes, aiding in the analysis of devices like TFET, HEMT, and FINFET. TCAD simulations, conducted using software like Silvaco and Sentaurus, enable researchers to understand semiconductor reliability physics and predict device-level reliability beyond the limitations of SPICE models. Moreover, TCAD simulations can be nonlinear, providing insights into the performance of microwave circuits and active device fabrication technologies. By utilizing TCAD, designers can simulate various parameters like resistivity, strip length, and bulk thickness to optimize the behavior of devices such as AC-coupled LGADs for enhanced spatial resolution.What is the current state of ECG-based active acquisition in the field of EIT?
5 answers
The current state of ECG-based active acquisition in the field of Electrical Impedance Tomography (EIT) involves the development and comparison of various amplifier circuits for ECG recording, including a four-transistor stage band-pass amplifier, a DDA-based fully differential CMOS instrumentation amplifier, and an OTA amplifier using current reuse. Additionally, wearable sensor architectures have been designed to enable synchronous multilead ECG data acquisition alongside frequency-multiplexed EIT measurements, showcasing the feasibility of noninvasive cardiovascular monitoring. Furthermore, advancements in EIT technology have led to the integration of front-end circuits for EEG and EIT acquisition on electrodes, enhancing signal quality and functional integration for brain imaging applications with minimal wiring requirements. These developments highlight the progress and potential for ECG-based active acquisition within the realm of EIT research.What are the most common instruments used to detect sexual incest marriages?
5 answers
The most common instruments used to detect sexual incest marriages involve DNA typing, which is considered the only unbiased approach for identifying incestuous offspring. In the context of evaluating sexual health after spinal cord injury, various instruments have been developed, with seven validated tools specifically for assessing sexuality in individuals with spinal cord injury. Additionally, the application of engineering tools has led to the development of sophisticated devices to measure human sexual response, highlighting the use of instrumentation for quantitative measurement in this field. On a different note, a detection instrument has been designed for detecting short-circuit points in winding conductor assemblies, showcasing the use of specialized equipment for specific detection purposes.How to build a Mosfet amplifier?
5 answers
To build a MOSFET amplifier, one can consider various approaches outlined in the research papers. One method involves utilizing a MOSFET circuit architecture designed to reduce low-frequency flicker noise, enhancing amplification without significant power consumption. Another innovative approach involves a MESFET amplifier tailored for the Internet of Things, featuring self-powered functionality through thermoelectric conversion and energy recycling mechanisms. Additionally, MOSFET amplifiers can be designed for specific voltage gains by understanding the transconductance and bias point interactions, streamlining the design process for achieving desired performance. By incorporating these insights, one can construct MOSFET amplifiers optimized for various applications, ranging from low noise amplification for wireless signalsto self-powered IoT-oriented amplification systems.