Two-dimensional materials are attractive for use in next-generation nanoelectronic devices because, compared to one-dimensional materials, it is relatively easy to fabricate complex structures from them. The most widely studied two-dimensional material is graphene, both because of its rich physics and its high mobility. However, pristine graphene does not have a bandgap, a property that is essential for many applications, including transistors. Engineering a graphene bandgap increases fabrication complexity and either reduces mobilities to the level of strained silicon films or requires high voltages. Although single layers of MoS(2) have a large intrinsic bandgap of 1.8 eV (ref. 16), previously reported mobilities in the 0.5-3 cm(2) V(-1) s(-1) range are too low for practical devices. Here, we use a halfnium oxide gate dielectric to demonstrate a room-temperature single-layer MoS(2) mobility of at least 200 cm(2) V(-1) s(-1), similar to that of graphene nanoribbons, and demonstrate transistors with room-temperature current on/off ratios of 1 × 10(8) and ultralow standby power dissipation. Because monolayer MoS(2) has a direct bandgap, it can be used to construct interband tunnel FETs, which offer lower power consumption than classical transistors. Monolayer MoS(2) could also complement graphene in applications that require thin transparent semiconductors, such as optoelectronics and energy harvesting.

/pdf/single-layer-mos2-transistors-6go64w4t3p.pdf

Single-layer MoS2 transistors

The compelling demand for higher performance and lower power consumption in electronic systems is the main driving force of the electronics industry's quest for devices and/or architectures based on new materials. Here, we provide a review of electronic devices based on two-dimensional materials, outlining their potential as a technological option beyond scaled complementary metal-oxide-semiconductor switches. We focus on the performance limits and advantages of these materials and associated technologies, when exploited for both digital and analog applications, focusing on the main figures of merit needed to meet industry requirements. We also discuss the use of two-dimensional materials as an enabling factor for flexible electronics and provide our perspectives on future developments.

Electronics based on two-dimensional materials

Logic circuits and the ability to amplify electrical signals form the functional backbone of electronics along with the possibility to integrate multiple elements on the same chip. The miniaturization of electronic circuits is expected to reach fundamental limits in the near future. Two-dimensional materials such as single-layer MoS2 represent the ultimate limit of miniaturization in the vertical dimension, are interesting as building blocks of low-power nanoelectronic devices, and are suitable for integration due to their planar geometry. Because they are less than 1 nm thin, 2D materials in transistors could also lead to reduced short channel effects and result in fabrication of smaller and more power-efficient transistors. Here, we report on the first integrated circuit based on a two-dimensional semiconductor MoS2. Our integrated circuits are capable of operating as inverters, converting logical “1” into logical “0”, with room-temperature voltage gain higher than 1, making them suitable for incorporat...

Integrated Circuits and Logic Operations Based on Single-Layer MoS2

In the quest for higher performance, the dimensions of field-effect transistors (FETs) continue to decrease. However, the reduction in size of FETs comprising 3D semiconductors is limited by the rate at which heat, generated from static power, is dissipated. The increase in static power and the leakage of current between the source and drain electrodes that causes this increase, are referred to as short-channel effects. In FETs with channels made from 2D semiconductors, leakage current is almost eliminated because all electrons are confined in atomically thin channels and, hence, are uniformly influenced by the gate voltage. In this Review, we provide a mathematical framework to evaluate the performance of FETs and describe the challenges for improving the performances of short-channel FETs in relation to the properties of 2D materials, including graphene, transition metal dichalcogenides, phosphorene and silicene. We also describe tunnelling FETs that possess extremely low-power switching behaviour and explain how they can be realized using heterostructures of 2D semiconductors. Field-effect transistors (FETs) with semiconducting channels made from 2D materials are known to have fewer problems with short-channel effects than devices comprising 3D semiconductors. In this Review, a mathematical framework to evaluate the performance of FETs is outlined with a focus on the properties of 2D materials, such as graphene, transition metal dichalcogenides, phosphorene and silicene.

Two-dimensional semiconductors for transistors

The development of silicon semiconductor technology has produced breakthroughs in electronics—from the microprocessor in the late 1960s to early 1970s, to automation, computers and smartphones—by downscaling the physical size of devices and wires to the nanometre regime. Now, graphene and related two-dimensional (2D) materials offer prospects of unprecedented advances in device performance at the atomic limit, and a synergistic combination of 2D materials with silicon chips promises a heterogeneous platform to deliver massively enhanced potential based on silicon technology. Integration is achieved via three-dimensional monolithic construction of multifunctional high-rise 2D silicon chips, enabling enhanced performance by exploiting the vertical direction and the functional diversification of the silicon platform for applications in opto-electronics and sensing. Here we review the opportunities, progress and challenges of integrating atomically thin materials with silicon-based nanosystems, and also consider the prospects for computational and non-computational applications. Progress in integrating atomically thin two-dimensional materials with silicon-based technology is reviewed, together with the associated opportunities and challenges, and a roadmap for future applications is presented.

Graphene and two-dimensional materials for silicon technology.

A 45 nm logic technology is described that for the first time incorporates high-k + metal gate transistors in a high volume manufacturing process. The transistors feature 1.0 nm EOT high-k gate dielectric, dual band edge workfunction metal gates and third generation strained silicon, resulting in the highest drive currents yet reported for NMOS and PMOS. The technology also features trench contact based local routing, 9 layers of copper interconnect with low-k ILD, low cost 193 nm dry patterning, and 100% Pb-free packaging. Process yield, performance and reliability are demonstrated on 153 Mb SRAM arrays with SRAM cell size of 0.346 mum2, and on multiple microprocessors.

/pdf/a-45nm-logic-technology-with-high-k-metal-gate-transistors-1fgej5i9ew.pdf

A 45nm Logic Technology with High-k+Metal Gate Transistors, Strained Silicon, 9 Cu Interconnect Layers, 193nm Dry Patterning, and 100% Pb-free Packaging

D. Simon

Papers

A 45nm Logic Technology with High-k+Metal Gate Transistors, Strained Silicon, 9 Cu Interconnect Layers, 193nm Dry Patterning, and 100% Pb-free Packaging