Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

Fast parallel algorithms for short-range molecular dynamics

다중혈관 관상동맥 환자에서 y-문합을 이용하여 양쪽 내흉동맥만을 사용한 우회술의 조기 성적

BACKGROUND With a rising global population, increasing energy demands, and impending climate change, major concerns have been raised over the security of our energy future. Developing sustainable, fossil-free pathways to produce fuels and chemicals of global importance could play a major role in reducing carbon dioxide emissions while providing the feedstocks needed to make the products we use on a daily basis. One prospective goal is to develop electrochemical conversion processes that can convert molecules in the atmosphere (e.g., water, carbon dioxide, and nitrogen) into higher-value products (e.g., hydrogen, hydrocarbons, oxygenates, and ammonia) by coupling to renewable energy. Electrocatalysts play a key role in these energy conversion technologies because they increase the rate, efficiency, and selectivity of the chemical transformations involved. Today’s electrocatalysts, however, are inadequate. The grand challenge is to develop advanced electrocatalysts with the enhanced performance needed to enable widespread penetration of clean energy technologies. ADVANCES Over the past decade, substantial progress has been made in understanding several key electrochemical transformations, particularly those that involve water, hydrogen, and oxygen. The combination of theoretical and experimental studies working in concert has proven to be a successful strategy in this respect, yielding a framework to understand catalytic trends that can ultimately provide rational guidance toward the development of improved catalysts. Catalyst design strategies that aim to increase the number of active sites and/or increase the intrinsic activity of each active site have been successfully developed. The field of hydrogen evolution, for example, has seen important breakthroughs over the years in the development of highly active non–precious metal catalysts in acid. Notable advancements have also been made in the design of oxygen reduction and evolution catalysts, although there remains substantial room for improvement. The combination of theory and experiment elucidates the remaining challenges in developing further improved catalysts, often involving scaling relations among reactive intermediates. This understanding serves as an initial platform to design strategies to circumvent technical obstacles, opening up opportunities and approaches to develop higher-performance electrocatalysts for a wide range of reactions. OUTLOOK A systematic framework of combining theory and experiment in electrocatalysis helps to uncover broader governing principles that can be used to understand a wide variety of electrochemical transformations. These principles can be applied to other emerging and promising clean energy reactions, including hydrogen peroxide production, carbon dioxide reduction, and nitrogen reduction, among others. Although current paradigms for catalyst development have been helpful to date, a number of challenges need to be successfully addressed in order to achieve major breakthroughs. One important frontier, for example, is the development of both experimental and computational methods that can rapidly elucidate reaction mechanisms on broad classes of materials and in a wide range of operating conditions (e.g., pH, solvent, electrolyte). Such efforts would build on current frameworks for understanding catalysis to provide the deeper insights needed to fine-tune catalyst properties in an optimal manner. The long-term goal is to continue improving the activity and selectivity of these catalysts in order to realize the prospects of using renewable energy to provide the fuels and chemicals that we need for a sustainable energy future.

/pdf/combining-theory-and-experiment-in-electrocatalysis-insights-3l4yblici7.pdf

Combining theory and experiment in electrocatalysis: Insights into materials design

A fundamental change has been achieved in understanding surface electrochemistry due to the profound knowledge of the nature of electrocatalytic processes accumulated over the past several decades and to the recent technological advances in spectroscopy and high resolution imaging. Nowadays one can preferably design electrocatalysts based on the deep theoretical knowledge of electronic structures, via computer-guided engineering of the surface and (electro)chemical properties of materials, followed by the synthesis of practical materials with high performance for specific reactions. This review provides insights into both theoretical and experimental electrochemistry toward a better understanding of a series of key clean energy conversion reactions including oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). The emphasis of this review is on the origin of the electrocatalytic activity of nanostructured catalysts toward the aforementioned reactions by correlating the apparent electrode performance with their intrinsic electrochemical properties. Also, a rational design of electrocatalysts is proposed starting from the most fundamental aspects of the electronic structure engineering to a more practical level of nanotechnological fabrication.

Design of electrocatalysts for oxygen- and hydrogen-involving energy conversion reactions

The pace of materials discovery for heterogeneous catalysts and electrocatalysts could, in principle, be accelerated by the development of efficient computational screening methods. This would require an integrated approach, where the catalytic activity and stability of new materials are evaluated and where predictions are benchmarked by careful synthesis and experimental tests. In this contribution, we present a density functional theory-based, high-throughput screening scheme that successfully uses these strategies to identify a new electrocatalyst for the hydrogen evolution reaction (HER). The activity of over 700 binary surface alloys is evaluated theoretically; the stability of each alloy in electrochemical environments is also estimated. BiPt is found to have a predicted activity comparable to, or even better than, pure Pt, the archetypical HER catalyst. This alloy is synthesized and tested experimentally and shows improved HER performance compared with pure Pt, in agreement with the computational screening results.

Computational high-throughput screening of electrocatalytic materials for hydrogen evolution

Financial support from Ministerio de Ciencia e Innovacion (Project PID2019-105653GB-100) and Generalitat Valenciana (Project PROMETEO/2020/063) is acknowledged.

Cation Effects on Interfacial Water Structure and Hydrogen Peroxide Reduction on Pt(111)

We performed a phase II study to assess the efficacy and toxicity of the cisplatin-UFT-leucovorin (LV) combination in patients with advanced non-small-cell lung cancer (NSCLC). Twenty-five patients with measurable disease who had not received prior chemotherapy were entered into the trial. The therapeutic regimen consisted of cisplatin 90 mg/m(2) and i.v. LV 500 mg/m(2) on day 1, followed by oral UFT 390 mg/m(2)/day (in two doses on days 1 through 14. Patients also received oral LV 15 mg/12 h on days 2 through 14. Seventeen patients required reduced doses of UFT (200 mg/m(2) due to toxicity. Courses were repeated every 28 days for a minimum of three per patient. Three of 25 patients (12%) achieved a partial response (95% CI: 2.6 to 32.2%), two with 390 mg/m(2)/day and one with 200 mg/m(2)/day of UFT. The main side effects were hematological and gastrointestinal. In the courses including 390 mg/m(2)/day of UFT, grade 3-4 toxicity was leucopenia in 18% of the courses, nausea/vomiting in 27%, and diarrhea and epigastralgia in 13% each. Grade 3-4 toxicities for 200 mg/m(2)/day of UFT were leucopenia 2%, nausea/vomiting 9% and diarrhea 7%. In conclusion, this regimen cannot be recommend for the treatment of advanced NSCLC due to its low response rate and high toxicity.

Cisplatin and UFT Modulated with Leucovorin for the Treatment of Advanced Non-Small-Cell Lung Cancer

The electrochemical reactivity of hydroquinone-derived, catechol-derived and benzene-derived adlayers is compared at Pt(111) single-crystal surfaces (i) under stagnant hanging meniscus (HM) configu...

Use of Model Pt(111) Single Crystal Electrodes under HMRDE Configuration To Study the Redox Mechanism for Charge Injection at Aromatic/Metal Interfaces

Juan M. Feliu

Papers

Cation Effects on Interfacial Water Structure and Hydrogen Peroxide Reduction on Pt(111)

Cisplatin and UFT Modulated with Leucovorin for the Treatment of Advanced Non-Small-Cell Lung Cancer

Use of Model Pt(111) Single Crystal Electrodes under HMRDE Configuration To Study the Redox Mechanism for Charge Injection at Aromatic/Metal Interfaces

Peroxodisulfate reduction on platinum stepped surfaces vicinal to the (110) and (100) poles

Chirality at Well-Defined Metal Surfaces