scispace - formally typeset
Search or ask a question

Showing papers by "Mingwei Chen published in 2021"


Journal ArticleDOI
TL;DR: In this article, the authors reported the experimental measurements of the onset of shear amorphization in single-crystal boron carbide by nanoindentation and transmission electron microscopy.
Abstract: The failure of superhard materials is often associated with stress-induced amorphization. However, the underlying mechanisms of the structural evolution remain largely unknown. Here, we report the experimental measurements of the onset of shear amorphization in single-crystal boron carbide by nanoindentation and transmission electron microscopy. We verified that rate-dependent loading discontinuity, i.e., pop-in, in nanoindentation load-displacement curves results from the formation of nanosized amorphous bands via shear amorphization. Stochastic analysis of the pop-in events reveals an exceptionally small activation volume, slow nucleation rate, and lower activation energy of the shear amorphization, suggesting that the high-pressure structural transition is activated and initiated by dislocation nucleation. This dislocation-mediated amorphization has important implications in understanding the failure mechanisms of superhard materials at stresses far below their theoretical strengths.

42 citations


Journal ArticleDOI
TL;DR: In this paper, the authors proposed an efficient and low-cost catalysts to oxidize CO at room temperature using density functional theory (DFT) calculations and showed that the MnN-SV has a more excellent catalytic performance for CO oxidation compared to double-vacancy graphene (DV) due to the synergistic effect of the Mn and N atoms.

33 citations


Journal ArticleDOI
TL;DR: In this article, quantitative measurements of Na+ storage in a low-temperature dealloyed hard carbon with a tunable local structure from completely disordered micropores to gradually increased graphitic order domains are reported.
Abstract: The fundamental understanding of sodium storage mechanisms in amorphous carbon is essential to develop high-performance anode materials for sodium-ion batteries. However, the intrinsic relation between the structure of amorphous carbon and Na+ storage remains to be debated due to the difficulty in controlling and characterizing the local atomic configurations of amorphous carbon. Here we report quantitative measurements of Na+ storage in a low-temperature dealloyed hard carbon with a tunable local structure from completely disordered micropores to gradually increased graphitic order domains. The structure-capacity-potential correlation not only verifies the disputing "adsorption-intercalation" mechanisms, i.e., Na+ intercalation into local graphitic domains for the low-voltage plateaus and adsorption in fully disordered carbon for the sloping voltage profiles, but also unveils a new mechanism of Na+ adsorption on defective sites of graphitic carbon in the medium-potential sloping region. The quantitative investigations provide essential insights into the reaction mechanisms of Na+ with amorphous carbon for designing advanced sodium-ion battery anodes.

27 citations


Journal ArticleDOI
TL;DR: In this article, the dealloying velocity exhibits a linear to power law transition at a critical dealloughing depth, resulting from the interplay between the kinetic process of dealloysing and de-alloyed microstructure.

19 citations


Journal ArticleDOI
TL;DR: In this paper, a 3D bicontinuous nitrogen doped nanoporous graphene electrocatalyst coanchoring with atomically dispersed nickel and copper atoms (Ni,Cu)-NG) was proposed as a highly active single-atom ORR catalyst.
Abstract: Highly active, cost-effective and durable electrocatalysts for the oxygen reduction reaction (ORR) are critically important for renewable energy conversion and storage. Here we report a 3D bicontinuous nitrogen doped nanoporous graphene electrocatalyst co-anchoring with atomically dispersed nickel and copper atoms ((Ni,Cu)–NG) as a highly active single-atom ORR catalyst, fabricated by the combination of chemical vapor deposition and high temperature gas transportation. The resultant (Ni,Cu)–NG exhibits an exceptional ORR activity in alkaline electrolytes, comparable to the Pt-based benchmarks, from the synergistic effect of the CuNx and NiNx complexes. Endowed with high catalytic activity and outstanding durability under harsh electrochemical environments, rechargeable zinc–air batteries using (Ni,Cu)–NG as the cathodes show excellent energy efficiency (voltage gap of 0.74 V), large power density (150.6 mW cm−2 at 250 mA cm−2) and high cycling stability (>500 discharge–charge cycles at 10 mA cm−2). This study may pave an efficient avenue for designing highly durable single-atom ORR catalysts for metal–air batteries.

15 citations


Journal ArticleDOI
TL;DR: In this article, the authors explored the correlations between the calorimetric and dynamical glass transitions of three prototypical high-entropy metallic glasses (HEMGs) systems.
Abstract: Glass transition is one of the unresolved critical issues in solid-state physics and materials science, during which a viscous liquid is frozen into a solid or structurally arrested state. On account of the uniform arrested mechanism, the calorimetric glass transition temperature (Tg) always follows the same trend as the dynamical glass transition (or α-relaxation) temperature (Tα) determined by dynamic mechanical analysis (DMA). Here, we explored the correlations between the calorimetric and dynamical glass transitions of three prototypical high-entropy metallic glasses (HEMGs) systems. We found that the HEMGs present a depressed dynamical glass transition phenomenon, i.e., HEMGs with moderate calorimetric Tg represent the highest Tα and the maximum activation energy of α-relaxation. These decoupled glass transitions from thermal and mechanical measurements reveal the effect of high configurational entropy on the structure and dynamics of supercooled liquids and metallic glasses, which are associated with sluggish diffusion and decreased dynamic and spatial heterogeneities from high mixing entropy. The results have important implications in understanding the entropy effect on the structure and properties of metallic glasses for designing new materials with plenteous physical and mechanical performances. Here the authors study thermodynamic and dynamic glass transition of high entropy metallic glasses. Results show retarded α-relaxation and distinct crystallization resistance attributed to their sluggish diffusion and high-entropy mixing that is different from the traditional metallic glasses.

14 citations


Journal ArticleDOI
TL;DR: In this article, high OER activity can be achieved from the metallic state of Ni which is passivated by atomically thick graphene in a three-dimensional nanoporous architecture, benefiting from the high electrical conductivity and low impedance resistance for charge transfer and transport.
Abstract: Developing highly active electrocatalysts with low costs and long durability for oxygen evolution reactions (OERs) is crucial towards the practical implementations of electrocatalytic water-splitting and rechargeable metal–air batteries Anodized nanostructured 3d transition metals and alloys with the formation of OER-active oxides/hydroxides are known to have high catalytic activity towards OERs but suffer from poor electrical conductivity and electrochemical stability in harsh oxidation environments Here we report that high OER activity can be achieved from the metallic state of Ni which is passivated by atomically thick graphene in a three-dimensional nanoporous architecture As a free-standing catalytic anode, the non-oxide transition metal catalyst shows a low OER overpotential, high OER current density and long cycling lifetime in alkaline solutions, benefiting from the high electrical conductivity and low impedance resistance for charge transfer and transport This study may pave a new way to develop high efficiency transition metal OER catalysts for a wide range of applications in renewable energy

11 citations


Journal ArticleDOI
TL;DR: In this article, the polymorphism of Shockley partials is explored, assisted by a new method, and negative stacking fault energies (SFEs) result in novel partial pairs as if they were in hexagonal close-packed alloys.
Abstract: Negative stacking fault energies (SFEs) are found in face-centered cubic high-entropy alloys with excellent mechanical properties, especially at low temperatures. Their roles remain elusive due to the lack of in situ observation of nanoscale deformation. Here, the polymorphism of Shockley partials is fully explored, assisted by a new method. We show negative SFEs result in novel partial pairs as if they were in hexagonal close-packed alloys. The associated yield stresses are much higher than those for other mechanisms at low temperatures. This generalizes the physical picture for all negative-SFE alloys.

11 citations


Journal ArticleDOI
TL;DR: In this paper, the authors reported the discovery of spontaneous, bidirectional, bilayer twisting (twist angle ∼4.5°) in the metallic kagome MgCo6Ge6 at T = 100(2) K via X-ray diffraction measurements, enabled by the preparation of single crystals by the Laser Bridgman method.
Abstract: Chemical bonding in 2D layered materials and van der Waals solids is central to understanding and harnessing their unique electronic, magnetic, optical, thermal, and superconducting properties. Here, we report the discovery of spontaneous, bidirectional, bilayer twisting (twist angle ∼4.5°) in the metallic kagome MgCo6Ge6 at T = 100(2) K via X-ray diffraction measurements, enabled by the preparation of single crystals by the Laser Bridgman method. Despite the appearance of static twisting on cooling from T ∼300 to 100 K, no evidence for a phase transition was found in physical property measurements. Combined with the presence of an Einstein phonon mode contribution in the specific heat, this implies that the twisting exists at all temperatures but is thermally fluctuating at room temperature. Crystal Orbital Hamilton Population analysis demonstrates that the cooperative twisting between layers stabilizes the Co-kagome network when coupled to strongly bonded and rigid (Ge2) dimers that connect adjacent layers. Further modeling of the displacive disorder in the crystal structure shows the presence of a second, Mg-deficient, stacking sequence. This alternative stacking sequence also exhibits interlayer twisting, but with a different pattern, consistent with the change in electron count due to the removal of Mg. Magnetization, resistivity, and low-temperature specific heat measurements are all consistent with a Pauli paramagnetic, strongly correlated metal. Our results provide crucial insight into how chemical concepts lead to interesting electronic structures and behaviors in layered materials.

9 citations


Journal ArticleDOI
TL;DR: In this article, the authors used high-resolution electron channeling contrast imaging and transmission electron microscopy (TEM) to study the thermally stable dislocation substructures in a cold-rolled CoCrFeMnNi HEA subject to an annealing below the recrystallization temperature (Trx).

8 citations


Journal ArticleDOI
TL;DR: Synthesizing 3D porous carbon with atomic-scale control in geometry and topology of porous architectures is of great significance while it technically remains challenging as mentioned in this paper, and the selective dealloying, the selective...
Abstract: Synthesizing 3D porous carbon with atomic-scale control in geometry and topology of porous architectures is of great significance while it technically remains challenging. Dealloying, the selective...

Journal ArticleDOI
TL;DR: In this paper, repeated heating/cooling differential scanning calorimetry (DSC) results of the alloys and demonstrated that the liquidus temperatures Tl of the off-eutectic alloys are closely related to the melting of the primary crystalline phases that have the highest melting temperatures in alloys systems.

Journal ArticleDOI
TL;DR: In this paper, a near-atomic-scale characterization of {110} surfaces of ZIF-8 is conducted by low-dose aberration-corrected transmission electron microscopy (TEM).
Abstract: The properties of zeolitic imidazolate framework (ZIF) crystals highly depend on the structures of the low-energy surfaces, such as {110} of ZIF-8. However, the atomic/molecular configurations of the ZIF-8 {110} surfaces remain debated. In this study, the near-atomic-scale characterization of {110} surfaces of ZIF-8 is conducted by low-dose aberration-corrected transmission electron microscopy (TEM). The real-space images with mitigated surface delocalization by minimized spherical aberration of TEM, together with the solvent corrected surface energy calculations, demonstrate that the {110} surfaces of ZIF-8 crystals with an equilibrium-form rhombic morphology have a zigzag-type termination. This study provides experimental evidence to clarify the debated structure of {110} ZIF-8 surfaces and has important implications in understanding the crystal growth and surface related properties of ZIF-8.

Journal ArticleDOI
TL;DR: In this article, the formation and attenuation of GHz elastic waves in free-standing nanoporous gold films by MeV ultrafast electron diffraction and finite element simulations was studied.
Abstract: We studied the formation and attenuation of GHz elastic waves in free-standing nanoporous gold films by MeV ultrafast electron diffraction and finite element simulations. By tracing the evolution of the high frequency acoustic waves in time domain, we found that the bicontinuous nanoporous structure in nanoporous gold films results in three-dimensionally acoustic response with low coherence, leading to fast attenuation of the elastic waves in comparison with solid gold films. The morphologically dominated dynamics indicates the nanoporosity plays an important role in the high-frequency acoustic energy relaxation, which shines a light on the applications of dealloyed nanoporous materials in nanodevices and sensors as GHz and THz acoustic filters and dampers.

Posted ContentDOI
11 Aug 2021
TL;DR: In this article, the authors report atomic-scale observations of grain boundary (GB) dislocation climb in nanostructured Au during in situ straining at room temperature, which suggests a means of controlling microstructures and properties of nano-structured metals.
Abstract: We report atomic-scale observations of grain boundary (GB) dislocation climb in nanostructured Au during in situ straining at room temperature. Climb of a dislocation occurs by stress-induced reconstruction of two atomic columns at the edge of an extra half atomic plane in the dislocation core. Different from the conventional belief of dislocation climb by destruction or construction of a single atomic column at the dislocation core, the new atomic route is demonstrated to be energetically favorable by Monte Carlo simulations. Our in situ observations also reveal GB transformation through dislocation climb, which suggests a means of controlling microstructures and properties of nanostructured metals.


Posted Content
TL;DR: In this article, femtosecond MeV ultrafast electron diffraction was employed to characterize the atomic dynamics of metallic glasses in real-time and reveal collective atomic oscillations, presented in elastic electron scattering and atomic pair distribution functions, within the boson peak frequency range of 1.0-1.8 THz in both reciprocal and real space.
Abstract: Boson peak, the excess low energy excitations in the terahertz regime, is one of the most unique features of disordered systems and has been linked to many anomalous properties of glass materials. The nature and structural origin of the boson peak remain elusive and have been debated for more than a half century mainly due to the lack of real-time and real-space experimental insights of the dynamic phenomenon. In this work we employed femtosecond MeV ultrafast electron diffraction to characterize the atomic dynamics of metallic glasses in real time. The experiment reveals collective atomic oscillations, presented in elastic electron scattering and atomic pair distribution functions, within the boson peak frequency range of 1.0-1.8 THz in both reciprocal and real space. It was found that the oscillation frequency has reciprocal dependence on interatomic pair distances and the corresponding wave velocity experimentally affirms the transverse acoustic wave nature of the boson peak. The observed strong correlation between THz acoustic vibrations and coherent electron scattering provides compelling evidence that the boson peak originates from the collective transverse vibrational modes of structurally ordered atoms in the disordered system.

Journal ArticleDOI
TL;DR: In this paper, the discovery of spontaneous, bidirectional, bilayer twisting (twist angle ~ 4.5°) in the metallic kagome MgCo6Ge6 at T = 100(2) K via X-ray diffraction measure-ments, enabled by the preparation of single crystals by the Laser Bridgman method.
Abstract: Chemical bonding in 2D layered materials and van der Waals solids is central to understanding and harnessing their unique electronic, magnetic, optical, thermal and superconducting properties. Here we report the discovery of spontaneous, bidirectional, bilayer twisting (twist angle ~ 4.5°) in the metallic kagome MgCo6Ge6 at T = 100(2) K via X-ray diffraction measure-ments, enabled by the preparation of single crystals by the Laser Bridgman method. Despite the appearance of static twisting on cooling from T ~ 300 K to 100 K, no evidence for a phase transition was found in physical properties measurements. Combined with the presence of an Einstein phonon mode contribution in the specific heat, this implies that the twisting exists at all temperatures but is thermally fluctuating at room temperature. Crystal Orbital Hamilton Population analysis demonstrates that the cooperative twisting between layers stabilizes the Co-kagome network when coupled to strongly bonded and rigid (Ge2) dimers that connect adjacent layers. Further modelling of the displacive disorder in the crystal structure shows the presence of second, Mg-deficient, stacking sequence. This alternative stacking sequence also exhibits inter-layer twisting, but with a different pattern, consistent with the change in electron count due to removal of Mg. Magnetization, resistivity, and low-temperature specific heat measurements are all consistent with a Pauli paramagnetic, strongly correlated metal. Our results provide crucial insight into how chemical concepts lead to interesting electronic structures and behaviors in layered materials.