Showing papers in "arXiv: Materials Science in 2021"

Single-crystal hexagonal boron nitride monolayer epitaxially grown on Cu (111) thin film across a wafer

Abstract: We demonstrate single crystal growth of wafer-scale hexagonal boron nitride (hBN), an insulating atomic thin monolayer, on high-symmetry index surface plane Cu(111). The unidirectional epitaxial growth is guaranteed by large binding energy difference, ~0.23 eV, between A- and B-steps edges on Cu(111) docking with B6N7 clusters, confirmed by density functional theory calculations.

Synthesis and properties of free-standing monolayer amorphous carbon

Abstract: Bulk amorphous materials have been studied extensively and are widely used, yet their atomic arrangement remains an open issue. Although they are generally believed to be Zachariasen continuous random networks, recent experimental evidence favours the competing crystallite model in the case of amorphous silicon. In two-dimensional materials, however, the corresponding questions remain unanswered. Here we report the synthesis, by laser-assisted chemical vapour deposition, of centimetre-scale, free-standing, continuous and stable monolayer amorphous carbon, topologically distinct from disordered graphene. Unlike in bulk materials, the structure of monolayer amorphous carbon can be determined by atomic-resolution imaging. Extensive characterization by Raman and X-ray spectroscopy and transmission electron microscopy reveals the complete absence of long-range periodicity and a threefold-coordinated structure with a wide distribution of bond lengths, bond angles, and five-, six-, seven- and eight-member rings. The ring distribution is not a Zachariasen continuous random network, but resembles the competing (nano)crystallite model. We construct a corresponding model that enables density-functional-theory calculations of the properties of monolayer amorphous carbon, in accordance with observations. Direct measurements confirm that it is insulating, with resistivity values similar to those of boron nitride grown by chemical vapour deposition. Free-standing monolayer amorphous carbon is surprisingly stable and deforms to a high breaking strength, without crack propagation from the point of fracture. The excellent physical properties of this stable, free-standing monolayer amorphous carbon could prove useful for permeation and diffusion barriers in applications such as magnetic recording devices and flexible electronics.

A General Approach to High Efficiency Perovskite Solar Cells by Any Antisolvent

Abstract: Deposition of perovskite thin films by antisolvent engineering is one of the most common methods employed in perovskite photovoltaics research. Herein, we report on a general method that allows the fabrication of highly efficient perovskite solar cells by any antisolvent via the manipulation of the antisolvent application rate. Through a detailed structural, compositional and microstructural characterization of perovskite layers fabricated by 14 different antisolvents, we identify two key factors that influence the quality of the perovskite active layer: the solubility of the organic precursors in the antisolvent and its miscibility with the host solvent(s) of the perovskite precursor solution. Depending on these two factors, each antisolvent can be utilized to produce high performance devices reaching power conversion efficiencies (PCEs) that exceed 21%. Moreover, we demonstrate that by employing the optimal antisolvent application procedure, highly efficient solar cells can be fabricated from a broad range of precursor stoichiometries, with either a significant excess or deficiency of organic iodides.

Electron ptychography achieves atomic-resolution limits set by lattice vibrations

Abstract: Transmission electron microscopes use electrons with wavelengths of a few picometers, potentially capable of imaging individual atoms in solids at a resolution ultimately set by the intrinsic size of an atom. Unfortunately, due to imperfections in the imaging lenses and multiple scattering of electrons in the sample, the image resolution reached is 3 to 10 times worse. Here, by inversely solving the multiple scattering problem and overcoming the aberrations of the electron probe using electron ptychography to recover a linear phase response in thick samples, we demonstrate an instrumental blurring of under 20 picometers. The widths of atomic columns in the measured electrostatic potential are now no longer limited by the imaging system, but instead by the thermal fluctuations of the atoms. We also demonstrate that electron ptychography can potentially reach a sub-nanometer depth resolution and locate embedded atomic dopants in all three dimensions with only a single projection measurement.

Recent Advances and Applications of Deep Learning Methods in Materials Science

Abstract: Deep learning (DL) is one of the fastest growing topics in materials data science, with rapidly emerging applications spanning atomistic, image-based, spectral, and textual data modalities. DL allows analysis of unstructured data and automated identification of features. Recent development of large materials databases has fueled the application of DL methods in atomistic prediction in particular. In contrast, advances in image and spectral data have largely leveraged synthetic data enabled by high quality forward models as well as by generative unsupervised DL methods. In this article, we present a high-level overview of deep-learning methods followed by a detailed discussion of recent developments of deep learning in atomistic simulation, materials imaging, spectral analysis, and natural language processing. For each modality we discuss applications involving both theoretical and experimental data, typical modeling approaches with their strengths and limitations, and relevant publicly available software and datasets. We conclude the review with a discussion of recent cross-cutting work related to uncertainty quantification in this field and a brief perspective on limitations, challenges, and potential growth areas for DL methods in materials science. The application of DL methods in materials science presents an exciting avenue for future materials discovery and design.

A complete ab initio view of Orbach and Raman spin-lattice relaxation in a Dysprosium coordination compound.

Abstract: The unique electronic and magnetic properties of Lanthanides molecular complexes place them at the forefront of the race towards high-temperature single-ion magnets and magnetic quantum bits. The design of compounds of this class has so far been almost exclusively driven by static crystal field considerations, with emphasis on increasing the magnetic anisotropy barrier. This guideline has now reached its maximum potential and new progress can only come from a deeper understanding of spin-phonon relaxation mechanisms. In this work we compute relaxation times fully ab initio and unveil the nature of all spin-phonon relaxation mechanisms, namely Orbach and Raman pathways, in a prototypical Dy single-ion magnet. Computational predictions are in agreement with the experimental determination of spin relaxation time and crystal field anisotropy, and show that Raman relaxation, dominating at low temperature, is triggered by low-energy phonons and little affected by further engineering of crystal field axiality. A comprehensive analysis of spin-phonon coupling mechanism reveals that molecular vibrations beyond the ion's first coordination shell can also assume a prominent role in spin relaxation through an electrostatic polarization effect. Therefore, this work shows the way forward in the field by delivering a novel and complete set of chemically-sound design rules tackling every aspect of spin relaxation at any temperature

Strongly correlated excitonic insulator in atomic double layers

Abstract: Excitonic insulators (EI) arise from the formation of bound electron-hole pairs (excitons) in semiconductors and provide a solid-state platform for quantum many-boson physics. Strong exciton-exciton repulsion is expected to stabilize condensed superfluid and crystalline phases by suppressing both density and phase fluctuations. Although spectroscopic signatures of EIs have been reported, conclusive evidence for strongly correlated EI states has remained elusive. Here, we demonstrate a strongly correlated spatially indirect two-dimensional (2D) EI ground state formed in transition metal dichalcogenide (TMD) semiconductor double layers. An equilibrium interlayer exciton fluid is formed when the bias voltage applied between the two electrically isolated TMD layers, is tuned to a range that populates bound electron-hole pairs, but not free electrons or holes. Capacitance measurements show that the fluid is exciton-compressible but charge-incompressible - direct thermodynamic evidence of the EI. The fluid is also strongly correlated with a dimensionless exciton coupling constant exceeding 10. We further construct an exciton phase diagram that reveals both the Mott transition and interaction-stabilized quasi-condensation. Our experiment paves the path for realizing the exotic quantum phases of excitons, as well as multi-terminal exciton circuitry for applications.

Theory of Chirality Induced Spin Selectivity: Progress and Challenges

Abstract: We provide a critical overview of the theory of the chirality-induced spin selectivity (CISS) effect, i.e., phenomena in which the chirality of molecular species imparts significant spin selectivity to various electron processes. Based on discussions in a recently held workshop, and further work published since, we review the status of CISS effects - in electron transmission, electron transport, and chemical reactions. For each, we provide a detailed discussion of the state-of-the-art in theoretical understanding and identify remaining challenges and research opportunities.

Weyl, Dirac and high-fold chiral fermions in topological quantum materials.

Abstract: Quantum materials hosting Weyl fermions have opened a new era of research in condensed matter physics. First proposed in 1929 in particle physics, Weyl fermions have yet to be observed as elementary particles. In 2015, Weyl fermions were detected as collective electronic excitations in the strong spin-orbit coupled material tantalum arsenide, TaAs. This discovery was followed by a flurry of experimental and theoretical explorations of Weyl phenomena in materials. Weyl materials naturally lend themselves to the exploration of the topological index associated with Weyl fermions and their divergent Berry curvature field, as well as the topological bulk-boundary correspondence giving rise to protected conducting surface states. Here, we review the broader class of Weyl topological phenomena in materials, starting with the observation of emergent Weyl fermions in the bulk and of Fermi arc states on the surface of the TaAs family of crystals by photoemission spectroscopy. We then discuss some of the exotic optical and magnetic responses observed in these materials, as well as the progress in developing some of the related chiral materials. We discuss the conceptual development of high-fold chiral fermions, which generalize Weyl fermions, and we review the observation of high-fold chiral fermion phases by taking the rhodium silicide, RhSi, family of crystals as a prime example. Lastly, we discuss recent advances in Weyl-line phases in magnetic topological materials. With this Review, we aim to provide an introduction to the basic concepts underlying Weyl physics in condensed matter, and to representative materials and their electronic structures and topology as revealed by spectroscopic studies. We hope this work serves as a guide for future theoretical and experimental explorations of chiral fermions and related topological quantum systems with potentially enhanced functionalities.

Parent grain reconstruction from partially or fully transformed microstructures in MTEX.

Abstract: A versatile generic framework for parent grain reconstruction from fully or partially transformed child microstructures was integrated into the open-source crystallographic toolbox MTEX. The framework extends traditional parent grain reconstruction, phase transformation and variant analysis to all parent-child crystal symmetry combinations. The inherent versatility of the universally applicable parent grain reconstruction methods, and the ability to conduct in-depth variant analysis are showcased via example workflows that can be programmatically modified by users to suit their specific applications. This is highlighted by three applications namely, $\alpha$-to-$\gamma$ reconstruction in a lath martensitic steel, $\alpha$-to-$\beta$ reconstruction in a Ti alloy, and a two-step reconstruction from $\alpha$-to-$\varepsilon$-to-$\gamma$ in a twinning and transformation -induced plasticity steel. Advanced orientation relationship discovery and analysis options, including variant analysis, is demonstrated via the add-on function library, ORTools.

Semiconductor-to-metal transition in bilayer MoSi$_2$N$_4$ and WSi$_2$N$_4$ with strain and electric field

Abstract: With exceptional electrical and mechanical properties and at the same time air-stability, layered MoSi2N4 has recently draw great attention. However, band structure engineering via strain and electric field, which is vital for practical applications, has not yet been explored. In this work, we show that the biaxial strain and external electric field are effective ways for the band gap engineering of bilayer MoSi$_2$N$_4$ and WSi$_2$N$_4$. It is found that strain can lead to indirect band gap to direct band gap transition. On the other hand, electric field can result in semiconductor to metal transition. Our study provides insights into the band structure engineering of bilayer MoSi$_2$N$_4$ and WSi$_2$N$_4$ and would pave the way for its future nanoelectronics and optoelectronics applications.

Twist engineering of the two-dimensional magnetism in double bilayer chromium triiodide homostructures

Abstract: Twist engineering, or the alignment of two-dimensional (2D) crystalline layers with desired orientations, has led to tremendous success in modulating the charge degree of freedom in hetero- and homo-structures, in particular, in achieving novel correlated and topological electronic phases in moir\'e electronic crystals. However, although pioneering theoretical efforts have predicted nontrivial magnetism and magnons out of twisting 2D magnets, experimental realization of twist engineering spin degree of freedom remains elusive. Here, we leverage the archetypal 2D Ising magnet chromium triiodide (CrI3) to fabricate twisted double bilayer homostructures with tunable twist angles and demonstrate the successful twist engineering of 2D magnetism in them. Using linear and circular polarization-resolved Raman spectroscopy, we identify magneto-Raman signatures of a new magnetic ground state that is sharply distinct from those in natural bilayer (2L) and four-layer (4L) CrI3. With careful magnetic field and twist angle dependence, we reveal that, for a very small twist angle (~ 0.5 degree), this emergent magnetism can be well-approximated by a weighted linear superposition of those of 2L and 4L CI3 whereas, for a relatively large twist angle (~ 5 degree), it mostly resembles that of isolated 2L CrI3. Remarkably, at an intermediate twist angle (~ 1.1 degree), its magnetism cannot be simply inferred from the 2L and 4L cases, because it lacks sharp spin-flip transitions that are present in 2L and 4L CrI3 and features a dramatic Raman circular dichroism that is absent in natural 2L and 4L ones. Our results demonstrate the possibility of designing and controlling the spin degree of freedom in 2D magnets using twist engineering.

Magnetism, symmetry and spin transport in van der Waals layered systems.

Abstract: The discovery of an ever increasing family of atomic layered magnetic materials, together with the already established vast catalogue of strong spin-orbit coupling (SOC) and topological systems, calls for some guiding principles to tailor and optimize novel spin transport and optical properties at their interfaces. Here we focus on the latest developments in both fields that have brought them closer together and make them ripe for future fruitful synergy. After outlining fundamentals on van der Waals (vdW) magnetism and SOC effects, we discuss how their coexistence, manipulation and competition could ultimately establish new ways to engineer robust spin textures and drive the generation and dynamics of spin current and magnetization switching in 2D materials-based vdW heterostructures. Grounding our analysis on existing experimental results and theoretical considerations, we draw a prospective analysis about how intertwined magnetism and spin-orbit torque (SOT) phenomena combine at interfaces with well-defined symmetries, and how this dictates the nature and figures-of-merit of SOT and angular momentum transfer. This will serve as a guiding role in designing future non-volatile memory devices that utilize the unique properties of 2D materials with the spin degree of freedom.

Mechanism of keyhole pore formation in metal additive manufacturing

Abstract: Metal additive manufacturing has gained extensive attention from research institutes and companies to fabricate intricate parts and functionally graded materials. However, the porosity of the as-built part deteriorates the mechanical property and even hinders the further application of metal additive manufacturing. Particularly, the mechanisms of keyhole pores associated with the keyhole fluctuation are not fully understood. To reveal the mechanisms of the keyhole pores formation, we adopt a multiphysics thermal-fluid flow model incorporating heat transfer, liquid flow, metal evaporation, Marangoni effect, and Darcy's law to simulate the keyhole pore formation process, and the results are validated with the in-situ X-ray images. The simulation results present the instant bubble formation due to the keyhole instability and motion of the instant bubble when it pins on the solidification front. Moreover, the unevenly distributed recoil pressure on the keyhole surface is an important factor for keyhole collapse and penetration. Furthermore, comparing the keyhole pore formation under different laser scanning speeds shows that the keyhole pore is sensitive to the manufacturing parameters. The keyhole fluctuation features and energy absorptivity variation on the rear keyhole wall could be metrics to evaluate the likelihood of the keyhole pore formation. Additionally, the simulation under a low ambient pressure shows the feasibility of improving the keyhole stability to reduce and even avoid the formation of keyhole pores.

Tuning the intermediate reaction barriers by CuPd catalyst to improve the selectivity of electroreduction CO2 to C2 products

Abstract: Electrochemical CO2 reduction is a promising strategy for utilization of CO2 and intermittent excess electricity. Cu is the only single-metal catalyst that can electrochemically convert CO2 to multi-carbon products. However, Cu has an undesirable selectivity and activity for C2 products, due to its insufficient amount of CO* for C-C coupling. Considering the strong CO2 adsorption and ultra-fast reaction kinetics of CO* formation on Pd, an intimate CuPd(100) interface was designed to lower the intermediate reaction barriers and then improve the efficiency of C2 products. Density functional theory (DFT) calculations showed that the CuPd(100) interface has enhanced CO2 adsorption and decreased CO2* hydrogenation energy barrier, which are beneficial for C-C coupling. The potential-determining step (PDS) barrier of CO2 to C2 products on CuPd(100) interface is 0.61 eV, which is lower than that on Cu(100) (0.72 eV). Motivated by the DFT calculation, the CuPd(100) interface catalyst was prepared by a facile chemical solution method and demonstrated by transmission electron microscope (TEM). The CO2 temperature programmed desorption (CO2-TPD) and gas sensor experiments proved the enhancements of CO2 adsorption and CO2* hydrogenation abilities on CuPd(100) interface catalyst. As a result, the obtained CuPd(100) interface catalyst exhibits a C2 Faradaic efficiency of 50.3 (+/-) 1.2% at -1.4 VRHE in 0.1 M KHCO3, which is 2.1 times higher than 23.6(+/-) 1.5% of Cu catalyst. This work provides a rational design of Cu-based electrocatalyst for multi-carbon products by fine-tuning the intermediate reaction barriers.

Topology and geometry under the nonlinear electromagnetic spotlight

Abstract: For many materials, a precise knowledge of their dispersion spectra is insufficient to predict their ordered phases and physical responses. Instead, these materials are classified by the geometrical and topological properties of their wavefunctions. A key challenge is to identify and implement experiments that probe or control these quantum properties. In this review, we describe recent progress in this direction, focusing on nonlinear electromagnetic responses that arise directly from quantum geometry and topology. We give an overview of the field by discussing new theoretical ideas, groundbreaking experiments, and the novel materials that drive them. We conclude by discussing how these techniques can be combined with new device architectures to uncover, probe, and ultimately control novel quantum phases with emergent topological and correlated properties.

Machine Learning on Neutron and X-Ray Scattering

Abstract: Neutron and X-ray scattering represent two state-of-the-art materials characterization techniques that measure materials' structural and dynamical properties with high precision. These techniques play critical roles in understanding a wide variety of materials systems, from catalysis to polymers, nanomaterials to macromolecules, and energy materials to quantum materials. In recent years, neutron and X-ray scattering have received a significant boost due to the development and increased application of machine learning to materials problems. This article reviews the recent progress in applying machine learning techniques to augment various neutron and X-ray scattering techniques. We highlight the integration of machine learning methods into the typical workflow of scattering experiments. We focus on scattering problems that faced challenge with traditional methods but addressable using machine learning, such as leveraging the knowledge of simple materials to model more complicated systems, learning with limited data or incomplete labels, identifying meaningful spectra and materials' representations for learning tasks, mitigating spectral noise, and many others. We present an outlook on a few emerging roles machine learning may play in broad types of scattering and spectroscopic problems in the foreseeable future.

High-entropy van der Waals materials formed from mixed metal dichalcogenides, halides and phosphorus trisulfides.

Abstract: The charge, spin, and composition degrees of freedom in high-entropy alloy endow it with tunable valence and spin states, infinite combinations and excellent mechanical performance. Meanwhile, the stacking, interlayer, and angle degrees of freedom in van der Waals material bring it with exceptional features and technological applications. Integration of these two distinct material categories while keeping their merits would be tempting. Based on this heuristic thinking, we design and explore a new range of materials (i.e., dichalcogenides, halides and phosphorus trisulfides) with multiple metallic constitutions and intrinsic layered structure, which are coined as high-entropy van der Waals materials. Millimeter-scale single crystals with homogeneous element distribution can be efficiently acquired and easily exfoliated or intercalated in this materials category. Multifarious physical properties like superconductivity, magnetic ordering, metal-insulator transition and corrosion resistance have been exploited. Further research based on the concept of high-entropy van der Waals materials will enrich the high-throughput design of new systems with intriguing properties and practical applications.

Bridging Nano and Micro-scale X-ray Tomography for Battery Research by Leveraging Artificial Intelligence

Abstract: X-ray Computed Tomography (X-ray CT) is a well-known non-destructive imaging technique where contrast originates from the materials' absorption coefficients. Novel battery characterization studies on increasingly challenging samples have been enabled by the rapid development of both synchrotron and laboratory-scale imaging systems as well as innovative analysis techniques. Furthermore, the recent development of laboratory nano-scale CT (NanoCT) systems has pushed the limits of battery material imaging towards voxel sizes previously achievable only using synchrotron facilities. Such systems are now able to reach spatial resolutions down to 50 nm. Given the non-destructive nature of CT, in-situ and operando studies have emerged as powerful methods to quantify morphological parameters, such as tortuosity factor, porosity, surface area, and volume expansion during battery operation or cycling. Combined with powerful Artificial Intelligence (AI)/Machine Learning (ML) analysis techniques, extracted 3D tomograms and battery-specific morphological parameters enable the development of predictive physics-based models that can provide valuable insights for battery engineering. These models can predict the impact of the electrode microstructure on cell performances or analyze the influence of material heterogeneities on electrochemical responses. In this work, we review the increasing role of X-ray CT experimentation in the battery field, discuss the incorporation of AI/ML in analysis, and provide a perspective on how the combination of multi-scale CT imaging techniques can expand the development of predictive multiscale battery behavioral models.

Induced Giant Piezoelectricity in Centrosymmetric Oxides

Abstract: Piezoelectrics are materials that linearly deform in response to an applied electric field. As a fundamental prerequisite, piezoelectric material must possess a non centrosymmetric crystal structure. For more than a century, this remains the major obstacle for finding new piezoelectric materials. We circumvent this limitation by breaking the crystallographic symmetry, and inducing large and sustainable piezoelectric effects in centrosymmetric materials by electric field induced rearrangement of oxygen vacancies Surprisingly, the results show the generation of extraordinarily large piezoelectric responses d33 ~200,000 pm/V), in cubic fluorite Gd-doped CeO2-x films, which is two orders of magnitude larger than in the presently best known lead based piezoelectric relaxor ferroelectric oxide. These findings open opportunities to design new piezoelectric materials from environmentally friendly centrosymmetric ones.

Scalable massively parallel computing using continuous-time data representation in nanoscale crossbar array

Abstract: The growth of connected intelligent devices in the Internet of Things has created a pressing need for real-time processing and understanding of large volumes of analogue data. The difficulty in boosting the computing speed renders digital computing unable to meet the demand for processing analogue information that is intrinsically continuous in magnitude and time. By utilizing a continuous data representation in a nanoscale crossbar array, parallel computing can be implemented for the direct processing of analogue information in real time. Here, we propose a scalable massively parallel computing scheme by exploiting a continuous-time data representation and frequency multiplexing in a nanoscale crossbar array. This computing scheme enables the parallel reading of stored data and the one-shot operation of matrix-matrix multiplications in the crossbar array. Furthermore, we achieve the one-shot recognition of 16 letter images based on two physically interconnected crossbar arrays and demonstrate that the processing and modulation of analogue information can be simultaneously performed in a memristive crossbar array.

Recent Advances on {\pi}-Conjugated Polymers as Active Elements in High Performance Organic Field-Effect Transistors

Abstract: As high-performance organic semiconductors, {\pi}-conjugated polymers have attracted much attention due to their charming advantages including low-cost, solution processability, mechanical flexibility, and tunable optoelectronic properties During the past several decades, the great advances have been made in polymers-based OFETs with p-type, n-type or even ambipolar characterics Through chemical modification and alignment optimization, lots of conjugated polymers exhibited superior mobilities, and some mobilities are even larger than 10 cm2 V-1 s-1 in OFETs, which makes them very promising for the applications in organic electronic devices This review describes the recent progress of the high performance polymers used in OFETs from the aspects of molecular design and assembly strategy Furthermore, the current challenges and outlook in the design and development of conjugated polymers are also mentioned

Real-time detection of Ochratoxin A in wine through insight of aptamer conformation in conjunction with graphene field-effect transistor

Abstract: Mycotoxins comprise a frequent type of toxins present in food and feed. The problem of mycotoxin contamination has been recently aggravated due to the increased complexity of the farm-to-fork chains, resulting in negative effects on human and animal health and, consequently, economics. The easy-to-use, on-site, on-demand, and rapid monitoring of mycotoxins in food/feed is highly desired. In this work, we report on an advanced mycotoxin biosensor based on an array of graphene field-effect transistors integrated on a single silicon chip. A specifically designed aptamer against Ochratoxin A (OTA) was used as a recognition element, where it was covalently attached to graphene surface via pyrenebutanoic acid, succinimidyl ester (PBASE) chemistry. Namely, an electric field stimulation was used to promote more efficient {\pi}-{\pi} stacking of PBASE to graphene. The specific G-rich aptamer strand suggest its {\pi}-{\pi} stacking on graphene in free-standing regime and reconfiguration in G-quadruplex during binding an OTA molecule. This realistic behavior of the aptamer is sensitive to the ionic strength of the analyte solution, demonstrating a 10-fold increase in sensitivity at low ionic strengths. The graphene-aptamer sensors reported here demonstrate fast assay with the lowest detection limit of 1.4 pM for OTA within a response time as low as 10 s, which is more than 30 times faster compared to any other reported aptamer-based methods for mycotoxin detection. The sensors hold comparable performance when operated in real-time within a complex matrix of wine without additional time-consuming pre-treatment.

Computing and Memory Technologies based on Magnetic Skyrmions

Abstract: Solitonic magnetic excitations such as domain walls and, specifically, skyrmionics enable the possibility of compact, high density, ultrafast,all-electronic, low-energy devices, which is the basis for the emerging area of skyrmionics. The topological winding of skyrmion spins affects their overall lifetime, energetics and dynamical behavior. In this review, we discuss skyrmionics in the context of the present day solid state memory landscape, and show how their size, stability and mobility can be controlled by material engineering, as well as how they can be nucleated and detected. Ferrimagnetsnear their compensation points are important candidates for this application, leading to detailed exploration of amorphous CoGd as well as the study of emergent materials such as Mn$_4$N and Inverse Heusler alloys. Along with material properties, geometrical parameters such as film thickness, defect density and notches can be used to tune skyrmion properties, such as their size and stability. Topology, however, can be a double-edged sword, especially for isolated metastable skyrmions, as it brings stability at the cost of additional damping and deflective Magnus forces compared to domain walls. Skyrmion deformation in response to forces also makes them intrinsically slower than domain walls. We explore potential analog applications of skyrmions, including temporal memory at low density, and decorrelator for stochastic computing at a higher density that capitalizes on their interactions. We summarize the main challenges to achieve a skyrmionics technology, including maintaining positional stability with very high accuracy, electrical readout, especially for small ferrimagnetic skyrmions, deterministic nucleation and annihilation, and overall integration with digital circuits with the associated circuit overhead.

Inhibited nonradiative decay at all exciton densities in monolayer semiconductors

Abstract: Most optoelectronic devices operate at high photocarrier densities, where all semiconductors suffer from enhanced nonradiative recombination. Nonradiative processes proportionately reduce photoluminescence (PL) quantum yield (QY), a performance metric that directly dictates the maximum device efficiency. Although transition-metal dichalcogenide (TMDC) monolayers exhibit near-unity PL QY at low exciton densities, nonradiative exciton-exciton annihilation (EEA) enhanced by van-Hove singularity (VHS) rapidly degrades their PL QY at high exciton densities and limits their utility in practical applications. Here, by applying small mechanical strain (< 1%), we circumvent VHS resonance and drastically suppress EEA in monolayer TMDCs, resulting in near-unity PL QY at all exciton densities despite the presence of a high native defect density. Our findings can enable light-emitting devices that retain high efficiency at all brightnesses.

Coexistence of negative and positive photoconductivity in few-layer PtSe2 field-effect transistors

Abstract: Platinum diselenide (PtSe_2) field-effect transistors with ultrathin channel regions exhibit p-type electrical conductivity that is sensitive to temperature and environmental pressure. Exposure to a supercontinuum white light source reveals that positive and negative photoconductivity coexists in the same device. The dominance of one type of photoconductivity over the other is controlled by environmental pressure. Indeed, positive photoconductivity observed in high vacuum converts to negative photoconductivity when the pressure is rised. Density functional theory calculations confirm that physisorbed oxygen molecules on the PtSe_2 surface act as acceptors. The desorption of oxygen molecules from the surface, caused by light irradiation, leads to decreased carrier concentration in the channel conductivity. The understanding of the charge transfer occurring between the physisorbed oxygen molecules and the PtSe_2 film provides an effective route for modulating the density of carriers and the optical properties of the material.

Machine learning for materials discovery: two-dimensional topological insulators

Abstract: One of the main goals and challenges of materials discovery is to find the best candidates for each interest property or application. Machine learning rises in this context to efficiently optimize this search, exploring the immense materials space, consisting of simultaneously the atomic, compositional, and structural spaces. Topological insulators, presenting symmetry-protected metallic edge states, are a promising class of materials for different applications. However, further, development is limited by the scarcity of viable candidates. Here we present and discuss machine learning-accelerated strategies for searching the materials space for two-dimensional topological materials. We show the importance of detailed investigations of each machine learning component, leading to different results. Using recently created databases containing thousands of ab initio calculations of 2D materials, we train machine learning models capable of determining the electronic topology of materials, with an accuracy of over 90%. We can then generate and screen thousands of novel materials, efficiently predicting their topological character without the need for a priori structural knowledge. We discover 56 non-trivial materials, of which 17 novel insulating candidates for further investigation, for which we corroborate their topological properties with density functional theory calculations. This strategy is 10$\times$ more efficient than the trial-and-error approach while few orders of magnitude faster and is a proof of concept for guiding improved materials discovery search strategies.

Magnetic Properties of NbSi2N4, VSi2N4, and VSi2P4 Monolayers

Abstract: The recent demonstration of MoSi2N4 and its exceptional stability to air, water, acid, and heat has generated intense interest in this new family of two-dimensional (2D) materials. Among these materials, NbSi2N4, VSi2N4, and VSi2P4 are ferromagnetic with in-plane magnetization. Within the plane, there is no energy preference to the angle of the magnetic moments. The calculated Curie temperature of monolayer VSi2N4 is room temperature. The magnetic anisotropy energies (MAEs) are small. The moments remain in-plane for uniaxial strains of up to +/-4%. Band flling near experimentally accessible limits will cause VSi2N4 to switch from in-plane to perpendicular magnetic anisotropy and NbSi2N4 to become nonmagnetic.

Unravelling CO adsorption on model single-atom catalysts.

Abstract: Understanding how the local environment of a single-atom catalyst affects stability and reactivity remains a significant challenge. We present an in-depth study of Cu1, Ag1, Au1, Ni1, Pd1, Pt1, Rh1, and Ir1 species on Fe3O4(001); a model support where all metals occupy the same 2-fold coordinated adsorption site upon deposition at room temperature. Surface science techniques revealed that CO adsorption strength at single metal sites differs from the respective metal surfaces and supported clusters. Charge transfer into the support modifies the d-states of the metal atom and the strength of the metal-CO bond. These effects could strengthen the bond (as for Ag1-CO) or weaken it (as for Ni1-CO), but CO-induced structural distortions reduce adsorption energies from those expected based on electronic structure alone. The extent of the relaxations depends on the local geometry and could be predicted by analogy to coordination chemistry.

Observation of the Orbital Rashba-Edelstein Magnetoresistance

Abstract: We report the observation of magnetoresistance (MR) originating from the orbital angular momentum transport (OAM) in a Permalloy (Py) / oxidized Cu (Cu*) heterostructure: the orbital Rashba-Edelstein magnetoresistance. The angular dependence of the MR depends on the relative angle between the induced OAM and the magnetization in a similar fashion as the spin Hall magnetoresistance (SMR). Despite the absence of elements with large spin-orbit coupling, we find a sizable MR ratio, which is in contrast to the conventional SMR which requires heavy elements. By varying the thickness of the Cu* layer, we confirm that the interface is responsible for the MR, suggesting that the orbital Rashba-Edelstein effect is responsible for the generation of the OAM. Through Py thickness-dependence studies, we find that the effective values for the spin diffusion and spin dephasing lengths of Py are significantly larger than the values measured in Py / Pt bilayers, approximately by the factor of 2 and 4, respectively. This implies that another mechanism beyond the conventional spin-based scenario is responsible for the MR observed in Py / Cu* structures originated in a sizeable transport of OAM. Our findings not only unambiguously demonstrate the current-induced torque without using any heavy element via the OAM channel but also provide an important clue towards the microscopic understanding of the role that OAM transport can play for magnetization dynamics.