Showing papers in "International Journal of Microwave and Wireless Technologies in 2021"
TL;DR: The wideband antenna presented in this paper offers omnidirectional stable radiation patterns, good gains, and efficiency with a compact size which make this design an ideal contender for wireless fidelity (WiFi), wireless local area network (WLAN), LTE, and sub-6 GHz 5G communication applications.
Abstract: This paper presents a low-profile multi-slotted patch antenna for long term evolution (LTE) and fifth-generation (5G) communication applications. The studied antenna comprised of a stepped patch and a ground plane. To attain the required operating band, three slots have been inserted within the patch. The insertion of the slots enhances the capacitive effect and helps the prototype antenna to achieve an operating band ranging from 3.15 to 5.55 GHz (S11 ≤−10 dB), covering the N77/N78/N79 for sub-6 GHz 5G wireless communications and LTE bands of 22/42/43/46. The wideband antenna presented in this paper offers omnidirectional stable radiation patterns, good gains, and efficiency with a compact size which make this design an ideal contender for wireless fidelity (WiFi), wireless local area network (WLAN), LTE, and sub-6 GHz 5G communication applications.
43 citations
TL;DR: In this article, a low-profile Hilbert-shaped metamaterial array-based antenna is designed and fabricated for RF energy harvesting, forming a rectangular patch with partial ground plane backing.
Abstract: This paper discusses the design and fabrication of a low-profile Hilbert-shaped metamaterial (MTM) array-based antenna, forming a rectangular patch with partial ground plane backing; the rest is slotted with traces for RF energy harvesting. The antenna is mounted on a 28 mm × 32 mm indium nickel oxide polymerized palm fiber (INP) substrate and compared to the identical one based on FR4 substrate. The two prototypes are printed with silver nanoparticles. Numerical and experimental tests are applied to the antenna performance in terms of S11 and radiation patterns. The obtained antenna gain bandwidth product of the INP prototype is found to be significantly better than the FR4 prototype. The proposed INP antenna gain at 5.8 and 8 GHz frequencies is found to be about 4.56 and 7.38 dBi, respectively, while the FR4 antenna gain is found to be 4.56 and 6.85 dBi at 5.8 and 8 GHz, respectively. Finally, the resultant DC voltage and the efficiency of conversion from harvested RF energy are measured experimentally at 5.8 and 8 GHz for both proposed prototypes.
31 citations
TL;DR: A compact multiple input multiple output (MIMO) antenna operating at 2.45 GHz industrial scientific and medical band is presented for wearable devices and performance of the proposed structure is reliable with structural deformation.
Abstract: A compact multiple input multiple output (MIMO) antenna operating at 2.45 GHz industrial scientific and medical band is presented for wearable devices. Open-end slotting is used to miniaturize the antenna dimensions. Inverted U-shaped ground stub is incorporated to reduce mutual coupling. On-body performance is analyzed on a three-layered equivalent tissue phantom model. The wide bandwidth of 300 MHz and port isolation of 30 dB are obtained from measured results. The antenna shows the efficiency of 40% and directivity of 4.56 dBi when placed at a gap of “s” = 4 mm from the body. Broadside radiation pattern and low specific absorption rate make the antenna suitable for on-body communication. Further, diversity performance is measured in terms of envelope correlation coefficient (ECC), diversity gain (DG), and channel capacity loss (CCL). The value of ECC is 0.025, DG is 9.98 dB, and CCL is 0.12 bits/s/Hz at 2.45 GHz. Antenna robustness is examined by bending the structure at different radii along the x-axis and y-axis. Performance of the proposed structure is reliable with structural deformation.
29 citations
TL;DR: The primary focus of this article is to provide a compressed overview of the developments in fractal-shaped antennas as well as arrays over the last few decades where the most prominent contributions mostly from IEEE journals have been highlighted.
Abstract: In mathematical definition, a fractal is a self-similar subset of Euclidean space whose fractal dimension strictly exceeds its topological dimension which in turn involves a recursive generating methodology that results in contours with infinitely intricate fine structures. Fractal geometry has been used to model complex natural objects such as clouds coastlines, etc., that has space-filling properties. In the past years, several groups of scientists around the globe tried to implement the structure of fractal geometry for applications in the field of electromagnetism, which led to the development of new innovative antenna configurations called “fractal antennas” which is primarily focused in fractal antenna elements, and fractal antenna arrays. It has been demonstrated that by exploiting the recursive nature of fractals, several marvellous kinds of properties can be observed in antennas and arrays. The primary focus of this article is to provide a compressed overview of the developments in fractal-shaped antennas as well as arrays over the last few decades where the most prominent contributions mostly from IEEE journals have been highlighted. The open intention of this review work is to show an encouraging path to antenna researchers for its advancement using fractal geometries.
27 citations
TL;DR: Various beamforming techniques with their merits, demerits, and applications are included in the paper for the knowledge extension of the beamforming antenna designers and research community.
Abstract: Abstract The growing need of the compact and portable antennas with high speed and low latency wireless communication is the present and future demand of the voice over Internet protocol, on-demand bandwidth, and multimedia applications. Fifth-generation (5G) covers certain low-frequency bands under 6 GHz spectrum, and most of the high-frequency bands under 60 GHz. 5G is the part of the millimeter wave spectrum (30–300 GHz) and is introduced to overcome the problem of spectrum shortage due to exponential enhancement of wireless applications in industry, medical, airborne, radar, satellite, and research fields. The International Telecommunication Union's objective of wireless communications promises to provide higher data rates up to 10 Gbps for 5G mobile users and connectivity to the artificial intelligence devices, along with high spectral efficiencies and enhanced coverage. The users for the 5G require around 5 and 50 Gbps of data rates for low and high mobility, respectively. Beamforming in 5G is the modern powerful technique for the coverage of the intended user/direction using the narrow beam width radiation patterns. A brief survey on 5G beamforming techniques, i.e. analog, digital, hybrid, switched, and adaptive etc. and its types, working algorithms, design of compact antennas, gain, and size/type of the substrates is carried out in this paper. The study of the hybrid coupler, branchline coupler, Wilkinson power divider, and Butler matrix in beamforming is required for 5G smart antennas. Different beam widths like ±15, ±35, ±45, and ±55° etc. are produced for the intended directions using a variety of beamforming techniques. From lower to higher frequency band beamforming applications with Roger's Duroid 4003/4350/5880, tectonic, and aluminum oxide dielectric substrates are discussed here. Various beamforming techniques with their merits, demerits, and applications are included in the paper for the knowledge extension of the beamforming antenna designers and research community.
26 citations
TL;DR: In this paper, two configurations of a modified feather-shaped antenna element for super wideband (SWB) multiple-input multiple-output (MIMO) applications were proposed.
Abstract: Two configurations of a modified feather-shaped antenna element are proposed for super wideband (SWB) multiple-input multiple-output (MIMO) applications. The antenna element geometry comprises of a circular slot-loaded feather-shaped radiator and rectangular notch-loaded quarter elliptical coplanar waveguide ground plane. An operating bandwidth of 4.4–51.5 GHz with inter-port isolation, S21 ≥ 15 dB for spatial diversity configuration, and 3.8–51.5 GHz with S21 ≥ 15 dB in pattern diversity configuration are achieved. The footprints of the antenna configurations are 17 × 33 and 31 × 31 mm2. Both configurations exhibited an envelope correlation coefficient of <−20 dB. The proposed MIMO configurations are fabricated and experimentally validated. The designed antenna configurations are SWB and compact.
25 citations
TL;DR: In this paper, the microwave absorption efficiency of dry banana leaves with sample preparation and reflectivity analysis by hardware measurement, and simulative analysis using CST microwave studio suite for different thicknesses in the frequency range of 1-20 GHz has been also explored in the present work.
Abstract: The ever-increasing use of electronic devices leads to a dangerous upsurge in the emission of microwave radiation; this has drawn appreciable concern in the fabrication of eco-friendly microwave absorber (MA) and it can be a prospective alternative. Present work, in the quest for possible alternatives, explores carbon-rich agricultural residues such as dry banana leaves as a microwave-absorbing material. The variation of microwave absorption efficiency with an increase in the percentage of resin has been already reported. An extensive study on the microwave absorption efficiency of dried banana leaves with sample preparation and reflectivity analysis by hardware measurement, and simulative analysis using CST microwave studio suite for different thicknesses in the frequency range of 1–20 GHz has been also explored in the present work. Single-layer MA thickness variation establishes different microwave absorption performance.
24 citations
TL;DR: In this article, a planar rectangular slot antenna with dual-band operation and realized higher peak gain is proposed, designed, and fabricated for sub-6 GHz 5G applications, which possesses a rectangular radiating slot with the inverted stub on its upper edge excited simultaneously by a micro-strip feed line having a double folded T-shaped structure.
Abstract: A planar rectangular slot antenna with dual-band operation and realized higher peak gain is proposed, designed, and fabricated for sub-6 GHz 5G applications. The antenna possesses a rectangular radiating slot with the inverted stub on its upper edge excited simultaneously by a micro-strip feed line having a double folded T-shaped structure. The fabricated design is of compact size with the radiating portion of 0.3 λ0 × 0.17 λ0 (λ0 represents free-space wavelength) and profile of 0.009 λ0. The measured results show the operating frequency bands of 3.29–3.63 GHz and 4.3–5.2 GHz, with a peak gain of around 7.17 dBi. The higher frequency band is generated by the feed patch and the slot whereas lower resonant frequency band is generated by the stub loaded on the slot. The measured results are in a good agreement with the simulated results. The proposed design is suitable for the International Telecommunications Union sub 6 GHz applications.
23 citations
TL;DR: In this paper, a compact 4-port band-notched multi-input-multi-output (MIMO) antenna with asymmetric coplanar strip (ACS) feed is presented for ultra-wide band (UWB) applications.
Abstract: Abstract In this paper, a compact 4-port band-notched multi-input-multi-output (MIMO) antenna with asymmetric coplanar strip (ACS) feed is presented for ultra-wide band (UWB) applications. The MIMO antenna is comprised of four semi-elliptical radiators with ACS feed for UWB applications and it is printed on inexpensive FR4 substrate of size 48 × 52 mm2 with ɛr = 4.4 and 1.6 mm height. The impedance characteristics of the suggested MIMO antenna ranges from 2.7 to 11 GHz with a band-notched behavior from 3 to 4 GHz to reduce the interception with WiMAX applications, and the isolation level over the achieved band is more than 20 dB between any two adjacent elements. Moreover, the radiation pattern of the proposed UWB antenna is almost omnidirectional with an average realized gain of 3.5 dBi over the entire achieved frequency band. The proposed ACS-fed antenna is confirmed by fabricating and measuring it's impedance and radiation characteristics. Finally, good consistency between simulation and measured outcomes is obtained confirming the validity of the MIMO antenna for real-life UWB wireless systems.
22 citations
TL;DR: In this paper, a new design of a four-element multiple-input multiple-output (MIMO) antenna, which is suitable for X-band applications, is presented.
Abstract: This study presents a new design of a four-element multiple-input multiple-output (MIMO) antenna, which is suitable for X-band applications. The circular polarization (CP) operation in this work is attained by using Tai Chi-shaped patches and L-shaped feeds. The proposed four-element MIMO antenna achieves two resonant frequencies, the first one at around 7.75 GHz and the second one with CP radiation is at approximately 10.15 GHz frequency. The measured isolations between ports with 46.7 × 46.7 mm2 total dimensions are <−20 dB. Due to the experiments, the envelop correlation coefficient for the orthogonal and parallel ports of the proposed MIMO antenna is <0.003 and 0.005, respectively. Additionally, the presented antenna has a circularly polarized performance in the frequency band of 9.75–10.41 GHz and the average realized peak gain almost 2 dBic. The investigated antenna in this work is fabricated and tested in which the results are in a good agreement.
18 citations
TL;DR: The designed antenna module bears low envelope correlation coefficient and minimal multiplexing efficiency hence fulfilling criteria suitable for various wireless MIMO applications.
Abstract: A compact antenna module with a single band notch at wireless local area network (WLAN) (5.725–5.825 GHz) for ultra-wideband (UWB) multiple input multiple output (MIMO) applications is proposed. Proposed antenna which acquires size of 0.299 λ × 0.413 λ × 0.005 λ mm3 at 3.1 GHz consists of two symmetrical radiators placed side by side on global merchandise link (GML) 1000 substrate (er = 3.2, tan δ = 0.004). Isolation between the antenna elements is >18 dB in the whole UWB band, which is achieved by introducing the vertical stub and H-slot between the monopole radiators in the ground plane. The simulated and measured results of the antenna system are in good agreement. The proposed antenna covers entire UWB with impedance bandwidth (|S11| < −15 dB) from 3.1 to 11 GHz except at WLAN notched band. The designed antenna module bears low envelope correlation coefficient and minimal multiplexing efficiency hence fulfilling criteria suitable for various wireless MIMO applications.
TL;DR: It is deduced that ΣΔ-RoF corroborates the present range of C-RAN fronthaul networks and can be a promising candidate for future mobile haul applications.
Abstract: Sigma-delta radio over fiber (ΣΔ-RoF) is an expedient technology for next-generation networks including 5G cloud/centralized radio access networks (C-RAN). In this article, we demonstrate a realistic experimental scenario for ΣΔ-RoF link targeting C-RAN fronthaul applications, by using baseband second-order 1-bit sigma-delta modulation (ΣΔ-M). The experimental set-up validates the LTE 20 MHz signals having modulation order of 256-quadrature amplitude modulation for a carrier frequency of 3 GHz, up to 10 km of standard single mode fiber. A detailed analysis of the ΣΔ-RoF system performance is reported by adjacent channel leakage ratio and error vector magnitude. Furthermore, an experimental study is evaluated where ΣΔ-RoF is compared with its counterparts. It is deduced that ΣΔ-RoF corroborates the present range of C-RAN fronthaul networks and can be a promising candidate for future mobile haul applications.
TL;DR: The successful widespread use of SAR in the automotive industry will be a large step forward toward developing automated parking functions which will be far superior to today's systems based on ultrasound sensors and radar (short range) beam-forming algorithms.
Abstract: This work presents the implementation of a synthetic aperture radar (SAR) at 77 GHz, for automotive applications. This implementation is unique in the sense that it is a radar-only solution for most use-cases. The set-up consists of two radar sensors, one to calculate the ego trajectory and the second for SAR measurements. Thus the need for expensive GNSS-based dead reckoning systems, which are in any case not accurate enough to fulfill the requirements for SAR, is eliminated. The results presented here have been obtained from a SAR implementation which is able to deliver processed images in a matter of seconds from the point where the targets were measured. This has been accomplished using radar sensors which will be commercially available in the near future. Hence the results are easily reproducible since the deployed radars are not special research prototypes. The successful widespread use of SAR in the automotive industry will be a large step forward toward developing automated parking functions which will be far superior to today's systems based on ultrasound sensors and radar (short range) beam-forming algorithms. The same short-range radar can be used for SAR, and the ultrasound sensors can thus be completely omitted from the vehicle.
TL;DR: In this article, the authors explored the various possible applications of metamaterial absorbers and made an attempt to explore the various potential applications of these sensors, including biomedical, chemical industry, food quality testing, agriculture, and agriculture.
Abstract: Abstract Sensors based on metamaterial absorbers are very promising when it comes to high sensitivity and quality factor, cost, and ease of fabrication. The absorbers could be used to sense physical parameters such as temperature, pressure, density as well as they could be used for determining electromagnetic properties of materials and their characterization. In this work, an attempt has been made to explore the various possible applications of these sensors. Metamaterial-based sensors are very popular for its diverse applications in areas such as biomedical, chemical industry, food quality testing, agriculture. Split-ring resonators with various shapes and topologies are the most frequently used structures where the sensing principle is based on electromagnetic interaction of the material under test with the resonator. Overcoming the design challenges using metamaterial sensors involving several constraints such as cost, compactness, reusability, ease in fabrication, and robustness is also addressed.
TL;DR: This review paper gives out an exhaustive review of the evolution and characteristics of the 5G spectrum allocations, the MIMO antenna design with regard to mutual coupling reduction techniques and safer user applications, comparison based on the literature, and the techniques implemented for enhancing the M IMO antenna performances.
Abstract:
The in-depth exploration in the future 5G technology symbolizes a revolution in technology for antenna designers to encounter the all time increasing need as well as demand for higher data rate wireless communications. The paper gives out an exhaustive review of the evolution and characteristics of the 5G spectrum allocations, the MIMO antenna design with regard to mutual coupling reduction techniques and safer user applications. It precisely covers almost all the aspects of 5G which mainly include the types of antenna designs and their performance parameters related to MIMO design. The paper also presents a brief description of massive MIMO technology for base station applications. The main aim of the paper is: (1) to emphasize the frequencies allocated for the 5G including sub-6 Ghz and mm-wave bands; (2) to underline the suitable antenna designs for MIMO applications for mobile devices and base stations; (3) to highlight the mutual coupling effects in MIMO designs and its reduction techniques; (4) to consider the gaps in the literature and the challenges for reducing SAR effects for the safety of the users. This review paper has been an attempt to explore the evolution of 5G bands and antenna designs for 5G applications, comparison based on the literature, and the techniques implemented for enhancing the MIMO antenna performances.
TL;DR: The proposed MIMO antenna may be a suitable application-oriented design for 5G mobile communication and achieves the desired performance, such as isolation >12 dB, a total efficiency >48%, and an envelope correlation coefficient <0.07.
Abstract:
A new wideband multiple-input/multiple-output (MIMO) antenna system able to operate in a frequency band ranging between 3.3 and 7.1 GHz is proposed for fifth-generation (5G) new radio applications for future smartphones. The design structure contains four pairs of compact microstrip-fed slot antennas, located at the corners of an FR-4 printed circuit board. Each pair of antennas consists of a radiator with two concentric annular slots, fed by two L-shaped microstrip-feeding lines and provides polarization and radiation pattern diversity function due to the orthogonal placement of their feed-line. In order to reduce the mutual coupling characteristic, we have inserted a rectangular slot under each microstrip feed-line. Besides, we have coupled and linked the two rings by a small gap to combine and move the resonant modes so as to achieve wideband coverage. The measured and simulated results show that the proposed design achieves the desired performance, such as isolation >12 dB, a total efficiency >48%, and an envelope correlation coefficient <0.07. In addition, the radiation pattern, the total efficiency, the realized gain, and the channel capacity are also studied. According to the reached results, the proposed MIMO antenna may be a suitable application-oriented design for 5G mobile communication.
TL;DR: This paper presents the survey of various bandwidth enhancement techniques which has been used in the 5G antennas designed by researchers and reviews of some wideband 5G antenna with their performance comparisons are discussed.
Abstract: Abstract Fifth-generation technology is not fully deployed in the world wireless communication till date. Millimeter-wave (mm-wave) band needs to be used due to plenty of available bandwidth and for achieving the goals of 5G such as greater data rate, ultra-high-speed video broadcasting, low latency services, and many more. Wideband antenna is required for 5G applications to access the high speed, low latency Internet services, and ultra-high-definition video streaming. Various bandwidth enhancement techniques have been reported by the researchers for microstrip antennas operating at microwave bands. High link losses, small wavelength, limited coverage, and environmental losses are the major challenges of mm-wave band. To mitigate these issues and satisfy 5G standard, an antenna with wide bandwidth, high gain, narrow steerable beam, high isolation, low side lobe levels, and multiband characteristics is required. Modifications in conventional antenna design techniques are required to achieve broader bandwidth along with stable radiation characteristics, improved gain, and low side lobe levels at mm-wave frequencies. This paper presents the survey of various bandwidth enhancement techniques which has been used in the 5G antennas designed by researchers. Reviews of some wideband 5G antennas with their performance comparisons are also discussed.
TL;DR: A hexagonal microstrip patch antenna has been developed to cover the navigational frequencies, WiMAX at 3.7 GHz and DSRC/IEEE802.11p at 5.9 GHz to meet the demands of various vehicular applications, which makes the antenna suitable for wireless applications of interest.
Abstract: Vehicle-to-everything communications (V2X), whose main objective is to improve security and efficiency, are provided by ad hoc vehicle networks that allow communication between vehicles. In the current study, a hexagonal microstrip patch antenna has been developed to cover the navigational frequencies, WiMAX at 3.7 GHz and DSRC/IEEE802.11p at 5.9 GHz to meet the demands of various vehicular applications. The antenna design is based on Cantor fractal slot, partial ground plane, and inset feed which is directly fed through the microstrip line. The proposed antenna shields the frequency band from 3.22 to 6.5 GHz with VSWR 2 within all the frequency bands. The presented antenna can resonate well in the 5.85–5.95 GHz band assigned for DSRC/IEEE802.11p and 3.7 GHz assigned for LTE/V2X. Simulated antenna gain varies from 3.06 to 5.25 dB within the operated frequency range providing an omnidirectional simulated radiation pattern in the most azimuth plane. To prove the validity of the simulation results, the chosen antenna structure has been fabricated and tested using a vector network analyzer MS2630. The measurement shows good results, which make the antenna suitable for wireless applications of interest.
TL;DR: A recently proposed meta-heuristic-based optimization technique known as ant lion optimization (ALO) is applied in this paper to determine the optimum set of current amplitude excitation weights and the inter-element distance among the array elements to reduce the side lobe level (SLL) and 3-dB beam width considering the mutual coupling effect.
Abstract: This paper presents an efficient approach for the design of a non-uniform single ring circular antenna array (CAA) for the synthesis of the optimal far-field radiation pattern. A recently proposed meta-heuristic-based optimization technique known as ant lion optimization (ALO) is applied in this paper to determine the optimum set of current amplitude excitation weights and the inter-element distance among the array elements to reduce the side lobe level (SLL) and 3-dB beam width considering the mutual coupling effect. The results achieved by employing the ALO algorithm are compared with the uniform radiation pattern and with those of the recently reported literature containing equal sets of elements to prove the superiority of ALO algorithm. Three different design examples of 8, 10, and 12 elements CAA are presented, and their performances are compared to illustrate the capability of the ALO algorithm-based approach over those of the recently reported literature.
TL;DR: In this paper, an efficient analysis of time-modulated array (TMA) toward realizing less-attenuating radiation patterns with simultaneously suppressed sidelobe and sidebands is presented in this framework, an optimal outer element-controlled time sequence is derived.
Abstract:
An efficient analysis of time-modulated array (TMA) toward realizing less-attenuating radiation patterns with simultaneously suppressed sidelobe and sidebands is presented in this paper. In this framework, an optimal outer element-controlled time sequence is derived. The proposed time scheme, along with optimized array excitations, is profitably applied for the desired solution. TMAs are considered unconventional alternatives to the phased arrays. The desired array radiation features can be attained by periodically enabling and disabling the array elements through high-speed switches. Despite the advantages of architectural simplicity and real-time reconfigurability of periodic time sequences, time-domain antenna arrays inherently generate unavoidable sideband radiations (SRs). The undesired SRs obtained at multiple harmonics around the carrier frequency of the array resembles power loss in unintended directions. This paper aims to minimize the SRs as well as the sidelobe level (SLL) for an efficient analysis of time-modulated linear array (TMLA) with high-directive radiation patterns. The starting instants and the period of on-times are optimized to generate a unique shifted time scheme for the edge elements of the TMLA to reduce the sideband levels (SBLs). The array excitations and the uniform spacing between the elements are also optimized together with the shifted time scheme for the coveted solution. Other methods of suppressing SLLs and SBLs with shifted pulse schemes and sub-sectioned pulse schemes are also presented for a fair comparison. Modified versions of the particle swarm optimization algorithm (PSO) are applied for the desired solutions. The optimal results attained by wavelet mutation-based novel PSO is compared with the conventional PSO and the modified novel PSO-based results. The representative results are reported, and the superior performance abilities of the proposed method compared to other published studies are assessed.
TL;DR: A small unmanned aerial vehicle (UAV)-based synthetic aperture radar (SAR) system using low-cost radar, position, and attitude sensors for the generation of high-resolution images using a GPU accelerated single-board computer.
Abstract: This paper describes a small unmanned aerial vehicle (UAV)-based synthetic aperture radar (SAR) system using low-cost radar (5–6 GHz), position (GNSS/RTK) and attitude (IMU) sensors for the generation of high-resolution images Measurements using straight as well as highly curved flight trajectories and varying flight speeds are presented, showing range and cross-range lobe-widths close to the theoretical limits An analysis of the improvements obtained by the use of attitude angles (roll, pitch, and yaw), to correct for the relative offsets in antenna positions as the UAV moves, is included A capability to generate SAR images onboard with the back-projection algorithm has been implemented using a GPU accelerated single-board computer Generated images are transmitted to ground using a Wi-Fi data link
Abstract: In this study, the problem of backward heating in microwave ablation technique is examined and an electromagnetic solution based on the use of high impedance graphene material is presented for its mitigation. In this context, a one-atom-thick graphene layer is added on the coaxial double slot antenna. In addition to the electromagnetic behavior, thermal effects caused by the graphene-covered antenna are emphasized. The graphene's conductivity being highly dependent on its chemical potential and the relaxation time, a parametric study is performed to determine a range of tolerances within which the graphene-coated antenna outperform a typical graphene-free antenna. The range of values is found to be 0 < μc < 0.5 eV and τ < 0.4 ps, for the chemical potential and the relaxation time, respectively. The backward heating problem being prevented, the ablation region is ensured to be spherical around the tip of the antenna. Effects of the graphene layer to the heat dissipation in the tissue, the necrotic tissue ratio (damage to the cancerous tissue of the caused by electromagnetic energy), and the treatment time using the coaxial double slot antenna were examined. The results show that the heat dissipation is concentrated around the slots (region of cancerous tissue) and a higher necrotic tissue ratio can be achieved with a graphene-covered double slot antenna in a shorter time.
TL;DR: In this paper, a circularly polarized high-power antenna with higher-order mode excitation (TM01) is presented, which consists of metal plates placed on the conical horn antenna's aperture for achieving TM01 to circular polarized TE11 mode conversion at the output.
Abstract:
A circularly polarized high-power antenna with higher-order mode excitation (TM01) is presented in this paper. The proposed structure consists of metal plates placed on the conical horn antenna's aperture for achieving TM01 to circular polarized TE11 mode conversion at the output. The structure is simulated on CST Microwave Studio. The designed antenna exhibits high gain and a directive radiation pattern. The axial ratio of the proposed structure is below 3 dB. The simulated and measured reflection coefficient for TM01 mode excitation is below −10 dB over a frequency range of 2.95–3.13 GHz. The structure is purely metallic, and the calculated high-power microwave (HPM) capability is up to the MW level. The proposed antenna is helpful for portable HPM systems.
TL;DR: The design, analysis, fabrication, and testing of a four-port multiple-input multiple-output (MIMO) antenna is reported in this paper for automotive communications to demonstrate the appropriateness of the proposed antenna for deployment in the shark fin housing of the present-day automobiles.
Abstract: Abstract The design, analysis, fabrication, and testing of a four-port multiple-input multiple-output (MIMO) antenna is reported in this paper for automotive communications. The MIMO antenna is constructed using the basic antenna element exploiting a slot geometry. Two such antennas are developed on the same microwave laminate to develop a two-port MIMO antenna. Two such microwave laminates are interlocked to create the four-port MIMO scheme. The most distinct feature of the proposed architecture is that the inter-port isolation is well-taken care without the need for an external decoupling unit. The four-port MIMO antenna has an overall volume of 32 × 15 × 32 mm3. The prototype MIMO antenna is fabricated and the measurements are carried out to validate the simulation results. The antenna offers ultra-wideband (UWB) characteristics covering the frequency range of 2.8–9.5 GHz. The average boresight gain of the antenna ranges from 3.2 to 5.41 dBi with the peak gain at 8 GHz. The simulated efficiency of the antenna is greater than 73% within the operating bandwidth. The MIMO parameters such as envelope correlation coefficient, diversity gain, and mean effective gain are evaluated and presented. The appropriateness of the proposed antenna for deployment in the shark fin housing of the present-day automobiles is verified using on-car performance estimation.
TL;DR: In this paper, a planar antenna with a microstrip-line inset-fed rectangular patch and a defected ground plane is proposed for modern communication systems, where a rotated rectangular slot and a modified electric-inductive-capacitive (m-ELC) resonator are introduced in the patch and the ground plane to achieve multiband behavior.
Abstract: Abstract A compact circularly polarized (CP) patch antenna is presented for modern communication systems. The prospective antenna consists of a microstrip-line inset-fed rectangular patch and a defected ground plane. A rotated rectangular slot and a modified electric-inductive-capacitive (m-ELC) resonator are introduced in the patch and the ground plane to achieve multiband behaviour. A corner of the radiating patch is truncated and an arrow-shaped stub is introduced for generating circular polarization. The physical area of the substrate is 0.26λ0 × 0.22λ0, and the radiator size is 0.16λ0 × 0.14λ0, where λ0 is the free-space wavelength estimated at the lowest frequency. The measured (S11≤-10 dB) bandwidths of the antenna are 80 MHz (3.58%) at 2.23 GHz, 75 MHz (2.64%) at 2.84 GHz, 80 MHz (2.50%) at 3.19 GHz, and 70 MHz (1.82%) at 3.83 GHz. The measured 3-dB axial ratio bandwidths are 40 MHz (1.41%), 100 MHz (3.12%), and 60 MHz (1.57%) at 2.84, 3.20 and 3.82 GHz, respectively. The proposed planar antenna design does not need dual-feed or multi-layered patches for achieving multiple CP bands. It offers easy integration with the printed circuits of the communication systems.
TL;DR: In this article, the authors proposed a TM01-TE11 mode converter using the concept of periodic substrates loading in a circular waveguide to convert TM01 mode to TE11 mode, which has advantages such as compact, lightweight structure, high conversion efficiency, and proper bandwidth.
Abstract: A mode converter design using the concept of periodic substrates loading in a circular waveguide, to convert TM01 mode to TE11 mode is presented in this paper. The detailed design principle, simulation, and measurement results are included in this study. Simulation results show that the purity of output fundamental TE11 mode of the converter approaches 99.2% for an operating frequency of 3.2 GHz. The mode conversion efficiency is more than 90% over 3.07–3.25 GHz band and the relative bandwidth is 5.6% (180 MHz). The proposed TM01–TE11 mode converter has advantages, such as the compact, lightweight structure, high conversion efficiency, and proper bandwidth. The fabrication cost is relatively low and the structure is easy to fabricate. The power-handling capability is limited to 10 MW due to dielectric-based design. The compactness and portability of the system (e.g. Space applications, Accelerators, High Power Microwave) can be improved significantly using the proposed mode converter.
TL;DR: In this article, the impact of the build orientation on additively manufactured waveguide-based hybrid couplers for D-band frequency range and relates it to other sources of uncertainty within the overall manufacturing process.
Abstract: This work focuses on the impact of the build orientation on additively manufactured waveguide-based hybrid couplers for D-band frequency range and relates it to other sources of uncertainty within the overall manufacturing process and measurement instrumentation for the D-band frequency range. The designed specimens are first printed from UV curable photopolymer resin and subsequently metal coated by an electroless silver plating process, which in turn is improved by making use of the slotted waveguide approach. Although the requirements toward geometrical precision to achieve phase errors below 10° are in an order of 0.1 mm, a desktop grade DLP printer is utilized in this work in order to point out the prospects and limitations of additive manufacturing. Furthermore, waveguide paths with bends are part of the model and their impact on the measured attenuation is estimated explicitly.
Despite this narrow field of tolerances, one specimen could have been realized, which achieves a measured output magnitude imbalance of 0.7 dB over the frequency range from 120 to 155 GHz while at the same time exhibiting a phase deviation of only <10° from the desired 90°. With these demonstrated results, the proposed approach provides suitability for future applications in the D-band frequency range.
TL;DR: The measured radiation characteristics of the fabricated prototypes show that the proposed designs are suitable for trendy 5G-RFID and mobile Internet of things (IoT) applications.
Abstract: Abstract Designing miniaturized multiband antennas to cover both the 5G new radio frequencies (FR1 and FR2) simultaneously is a challenge for wireless communication researchers. This paper presents two antenna designs : a dual-band printed antenna of size 18 × 16 × 0.285 mm3 operating at FR1–5.8 GHz and FR2–28 GHz and a triple-band printed antenna with dimensions 30 × 25 × 0.543 mm3 operating at FR1–3.5 GHz and 5.8 GHz (sub-6 GHz microwave frequency bands) and FR2–28 GHz (mm-wave frequency band). The final projected triple-band antenna has a compact size with an impedance bandwidth of 12.71%, 11.32%, and 18.3% at 3.5 GHz, 5.8 GHz, and 28 GHz, respectively with the corresponding gain of 1.86 dB, 2.55 dB, and 4.41 dB. The measured radiation characteristics of the fabricated prototypes show that the proposed designs are suitable for trendy 5G-RFID and mobile Internet of things (IoT) applications.
TL;DR: In this paper, a systematic identification, location, and analysis of a large number of performance enhancement methods of the Vivaldi antenna design depicting their concepts, advantages, drawbacks, and applications is presented.
Abstract: The progressions in the field of wireless technology can be highly attributed to the development of antennas, which can access high data rates, provide significant gain and uniform radiation characteristics. One such antenna called the Vivaldi antenna has attracted the utmost attention of the researchers owing to its high gain, wide bandwidth, low cross-polarization, and stable radiation characteristics. Over the years, different procedures have been proposed by several researchers to improve the performance of the Vivaldi antennas. Some of these different approaches are feeding mechanisms, integration of slots, dielectric substrate selection, and radiator shape. Correspondingly, the performance of a Vivaldi antenna can be increased by including dielectric lens, parasitic patch in between two radiators, corrugations, as well as metamaterials. This paper gives a systematic identification, location, and analysis of a large number of performance enhancement methods of Vivaldi antenna design depicting their concepts, advantages, drawbacks, and applications. The principal emphasis of this article is to offer an outline of the developments in the design of Vivaldi antennas over the last few years, where the most important offerings, mostly from IEEE publications, have been emphasized. This review work aims to reveal a promising path to antenna researchers for its advancement using Vivaldi antennas.
TL;DR: The proposed integrated design of a compact monopole antenna backed with a 1 × 2 textile-based artificial magnetic conductor (AMC) array can be nominated for wearable hand/wrist and Wi-Fi applications.
Abstract: A compact monopole antenna backed with a 1 × 2 textile-based artificial magnetic conductor (AMC) array is proposed. Textile was mainly selected for the AMC materials according to an investigation that took place between different AMC substrate materials, where it was settled that the textile one displayed the highest antenna gain and efficiency. The monopole antenna and the AMC, distanced apart by 5 mm, combined form the integrated design. It operates at 2.4 GHz, which was particularly selected as the resonant frequency for wirelessly sending the subject's symptoms data via Wi-Fi, with realized gain and total efficiency of 6.76 dBi and 88.4%, respectively, in free space. Separated by 3 mm from the specific anthropomorphic mannequin human hand model, it displays a realized gain and total efficiency of 4.06 dBi and 44.39%, respectively, in a flat condition. Furthermore, it exhibits a specific absorption rate (SAR) of 1.8 W/kg averaged over 10 g of tissue. When bent over the human hand model, it performs well and exhibits a maximum SAR of 0.521 and 0.406 W/kg, averaged over 1 and 10 g of tissues, respectively. As a result of such outcomes, the proposed integrated design can be nominated for wearable hand/wrist and Wi-Fi applications.