Proceedings ArticleDOI
Automatic and scalable parametric modeling for 1–100GHz transmission line
Reads0
Chats0
TLDR
An automatic parameter extraction and scalable modeling method for 1∼100GHz transmission line based on the equivalent-circuit model proposed in [1] is established and validated by application to scalable modeling of the coplanar waveguide (CPW) with satisfactory fitting accuracy.Abstract:
In this paper, an automatic parameter extraction and scalable modeling method for 1∼100GHz transmission line based on the equivalent-circuit model proposed in [1] is established. The parameters are extracted from electromagnetic simulations which are validated by the measurement date of the devices fabricated on HLMC 40nm RF CMOS process. This method is validated by application to scalable modeling of the coplanar waveguide (CPW) with satisfactory fitting accuracy.read more
Citations
More filters
Proceedings ArticleDOI
Scalable Modeling for the Coplanar Waveguide Step Discontinuity at Frequency up to 150 GHz
TL;DR: In this paper, a lumped equivalent circuit model is proposed for the simulation of the coplanar waveguide (CPW) step discontinuity within the frequency range of 0 to 150 GHz.
References
More filters
Journal ArticleDOI
S-parameter-based IC interconnect transmission line characterization
TL;DR: In this article, a methodology for extracting high-frequency IC interconnect transmission parameters directly from S-parameter measurements has been demonstrated using on-chip test structures, which consists of: (1) building onchip interconnect structures for microwave test, (2) characterizing and subtracting measurement system parasitics, extracting the transmission line impedance and propagation constant (attenuation constant and phase constant) from the calibrated data, and (4) extracting the Telegrapher's Equation transmission parameters (R, L, C, and G).
Journal ArticleDOI
Scalable Transmission Line and Inductor Models for CMOS Millimeter-Wave Design
TL;DR: A scalable measurement de embedding methodology is proposed, that can greatly reduce wafer area needed for test and deembedding structures and is able to fit the frequency-dependent behavior of the RLGC parameters well into the millimeter-wave range.