Journal ArticleDOI
Investigating the effect of electrode preheating in novel water-cooled advanced submerged arc welding process:
Ankush Choudhary,Munish Kumar Gupta,Munish Kumar Gupta,Manoj Kumar +3 more
- Vol. 233, Iss: 10, pp 2015-2029
Reads0
Chats0
TLDR
In this article, a novel developed water-cooled advanced submerged arc welding (WASAW) process has been designed and established, which can be utilized for higher preheating cur...Abstract:
In this paper, a novel developed water-cooled advanced submerged arc welding (WASAW) process has been designed and established. The developed WASAW process can be utilized for higher preheating cur...read more
Citations
More filters
Journal ArticleDOI
Experimental study on metakolin and baggashe ash based geopolymer concrete
TL;DR: In this paper, the fly ash based geopolymer concrete was prepared with bagasse ash and metakaolin which were used to replace fly ash at different percentages to study the microstructure, mechanical and durability properties.
Journal ArticleDOI
Performance enhancement of basin solar still using paraffin wax and floating wicks in the basin
TL;DR: In this article, a single effect basin type solar still has been modified to enhance the productivity of still by placing paraffin wax and floating wicks in the basin to enhance evaporation rate of basin water of modified still during day time.
Journal ArticleDOI
Progress of environment friendly cutting fluids/solid lubricants in turning-A review
TL;DR: A critical review of different vegetable oils, bio-oils, solid-lubricants and carbon based nano-solid lubricants while turning of hard-to-cut materials has been conducted as mentioned in this paper.
Journal ArticleDOI
Review on performance enhancement of solar absorption refrigeration system using various designs and phase change materials
TL;DR: In this paper, it has been found that the utilization of waste heat either from the marine ship engine or from the economizer can be used to run the ammonia water absorption refrigeration system.
Journal ArticleDOI
Experimental study on strength characteristics of polymer concrete with epoxy resin
TL;DR: In this paper, a correlation has been made between the conventional and polymer concrete used in this study along with resins and fibers of variant proportions and results are compare to the outcomes with Polymer fiber concrete with the Glass fiber percentage 0.5% and 1%.
References
More filters
Journal ArticleDOI
Effect of grain size on tensile properties of fine-grained metastable β titanium alloys fabricated by stress-induced martensite and its reverse transformations
TL;DR: In this article, fine-grained Ti-16V-3.5Al-3Sn alloys were fabricated through the stress-induced martensite and its reverse transformations.
Journal ArticleDOI
Optimization of A-TIG process parameters using response surface methodology
TL;DR: In this paper, the influence of process parameters such as welding current (I), welding speed (S), and flux coating density (F) on different aspects of weld bead geometry for example depth of penetration (DOP), bead width (BW), depth to width ratio (D/W), and weld fusion zone area (WA) were investigated by using the central composite design.
Journal ArticleDOI
Friction stir welding of aluminium alloys: An overview of experimental findings – Process, variables, development and applications:
TL;DR: The never-ending appetite of the mankind to produce more and more competitive products results in continuous development of newer and newer manufacturing processes as mentioned in this paper, and one of such a kind, a solid stat...
Journal ArticleDOI
Effects of flux composition on the element transfer and mechanical properties of weld metal in submerged arc welding
TL;DR: In this article, the effects of wire/flux combination on the chemical composition, tensile strength, and impact toughness of the weld metal were investigated and interpreted in terms of element transfer between the slag and the welding metal, i.e., Δ quantity.
Journal ArticleDOI
Effect of interpass temperature on residual stresses in multipass welds produced using low transformation temperature filler alloy
T. I. Ramjaun,Howard J. Stone,Leif Karlsson,Joe Kelleher,Richard J. Moat,J. R. Kornmeier,Kamellia Dalaei,H. K. D. H. Bhadeshia +7 more
TL;DR: Weld filler alloys that exploit transformation plasticity through low austenite to martensite transformation temperatures offer an effective method of reducing residual stresses in strong steel wel... as discussed by the authors.
Related Papers (5)
Measuring the utilization index of advanced manufacturing technologies: A case study
Harwinder Singh,Raman Kumar +1 more