Nonlinear Vibration Control of a System with Dry Friction and Viscous Damping Using the Saturation Phenomenon

TLDR: In this paper, the effect of dry friction on the response of a system that implements a vibration absorber is discussed, which is basically a plant with a PMDC motor excited by a harmonic forcing term and coupled with a quadratic nonlinear controller.

Abstract: Application of saturation to provide active nonlinear vibration control was introduced not long ago. Saturation occurs when two natural frequencies of a system with quadratic nonlinearities are in a ratio of around 2:1 and the system is excited at a frequency near its higher natural frequency. Under these conditions, there is a small upper limit for the high-frequency response and the rest of the input energy is channeled to the low-frequency mode. In this way, the vibration of one of the degrees of freedom of a coupled 2 degrees of freedom system is attenuated. In the present paper, the effect of dry friction on the response of a system that implements this vibration absorber is discussed. The system is basically a plant with a permanent magnet DC (PMDC) motor excited by a harmonic forcing term and coupled with a quadratic nonlinear controller. The absorber is built in electric circuitry and takes advantage of the saturation phenomenon. The method of multiple scales is used to find approximate solutions. Various response regimes of the closed-loop system as well as the stability of these regimes are studied and the stability boundaries are obtained. Especial attention is paid on the effect of dry friction on the stability boundaries. It is shown that while dry friction tends to shrink the stable region in some parts, it enlarges other parts of the stable region. To verify the theoretical results, they have been compared with numerical solution and good agreement between the two is observed.