Showing papers by "Yi Yan Yang published in 2018"

A macromolecular approach to eradicate multidrug resistant bacterial infections while mitigating drug resistance onset

Abstract: Polymyxins remain the last line treatment for multidrug-resistant (MDR) infections. As polymyxins resistance emerges, there is an urgent need to develop effective antimicrobial agents capable of mitigating MDR. Here, we report biodegradable guanidinium-functionalized polycarbonates with a distinctive mechanism that does not induce drug resistance. Unlike conventional antibiotics, repeated use of the polymers does not lead to drug resistance. Transcriptomic analysis of bacteria further supports development of resistance to antibiotics but not to the macromolecules after 30 treatments. Importantly, high in vivo treatment efficacy of the macromolecules is achieved in MDR A. baumannii-, E. coli-, K. pneumoniae-, methicillin-resistant S. aureus-, cecal ligation and puncture-induced polymicrobial peritonitis, and P. aeruginosa lung infection mouse models while remaining non-toxic (e.g., therapeutic index-ED50/LD50: 1473 for A. baumannii infection). These biodegradable synthetic macromolecules have been demonstrated to have broad spectrum in vivo antimicrobial activity, and have excellent potential as systemic antimicrobials against MDR infections.

Metal Nanoparticles for Diagnosis and Therapy of Bacterial Infection

Abstract: Infectious diseases caused by pathogenic bacteria, especially multidrug-resistant bacteria, and their global spreading have become serious public health concerns. Early diagnosis and effective therapy can efficiently prevent deterioration and further spreading of the infections. There is an urgent need for sensitive, selective, and facile diagnosis as well as therapeutically potent treatment. The emergence of nanotechnology has provided more options for diagnosis and treatments of bacterial infections. Metal nanoparticles and metal oxide nanoparticles have drawn intense attention owing to their unique optical, magnetic, and electrical properties. These versatile metal-based nanoparticles have great potential for selective detection of bacteria and/or therapy. This review gives an overview of recent efforts on developing various metal-based nanoparticles for bacterial detection and infection therapy. It begins with an introduction of fundamental concepts and mechanisms in designing diagnostic and therapeutic strategies. Representative achievements are selected to illustrate the proof-of-concept in vitro and in vivo applications. A brief discussion of challenges and perspective outlook in this field is provided at the end of this review.

Addressing Drug Resistance in Cancer with Macromolecular Chemotherapeutic Agents

Abstract: Drug resistance to chemotherapeutics is a recurrent issue plaguing many cancer treatment regimens. To circumvent resistance issues, we have designed a new class of macromolecules as self-contained chemotherapeutic agents. The macromolecular chemotherapeutic agents readily self-assemble into well-defined nanoparticles and show excellent activity in vitro against multiple cancer cell lines. These cationic polymers function by selectively binding and lysing cancer cell membranes. As a consequence of this mechanism, they exhibit significant potency against drug-resistant cancer cells and cancer stem cells, prevent cancer cell migration, and do not induce resistance onset following multiple treatment passages. Concurrent experiments with the small-molecule chemotherapeutic, doxorubicin, show aggressive resistance onset in cancer cells, a lack of efficacy against drug-resistant cancer cell lines, and a failure to prevent cancer cell migration. Additionally, the polymers showed anticancer efficacy in a hepatocel...

Engineering Polymersomes for Diagnostics and Therapy

Abstract: Engineered polymer vesicles, termed as polymersomes, confer a flexibility to control their structure, properties, and functionality. Self-assembly of amphiphilic copolymers leads to vesicles consisting of a hydrophobic bilayer membrane and hydrophilic core, each of which is loaded with a wide array of small and large molecules of interests. As such, polymersomes are increasingly being studied as carriers of imaging probes and therapeutic drugs. Effective delivery of polymersomes necessitates careful design of polymersomes. Therefore, this review article discusses the design strategies of polymersomes developed for enhanced transport and efficacy of imaging probes and therapeutic drugs. In particular, the article focuses on overviewing technologies to regulate the size, structure, shape, surface activity, and stimuli- responsiveness of polymersomes and discussing the extent to which these properties and structure of polymersomes influence the efficacy of cargo molecules. Taken together with future considerations, this article will serve to improve the controllability of polymersome functions and accelerate the use of polymersomes in biomedical applications.

A halogen bond-mediated highly active artificial chloride channel with high anticancer activity.

Abstract: Chloride-selective transmembrane carriers or channels might have possible uses in treating channelopathies or cancers. While chloride carriers have been extensively investigated, the corresponding chloride channels have remained limitedly studied. Moreover, all hitherto reported channel systems lack clearly definable and readily modifiable positions in their structures for the reliable construction and combinatorial optimization of their ion transport properties. As a result, the existing channels are limited by their large molecular weight, weak activity or low anion selectivity. In this report, we describe a readily accessible and robust monopeptide-based scaffold for the reliable construction of halogen bond-mediated artificial anion channels via directional assembly of electron-deficient iodine atoms, which create a transmembrane pathway for facilitating anion transport. The high intrinsic modularity of the backbone of the scaffold, which enables the rapid and combinatorial optimization of the transport activity and selectivity of channels, effectively delivers a highly active chloride channel A10. Such high activity in chloride transport subsequently leads to an excellent IC50 value of 20 μM toward inhibiting the growth of human breast cancer cells (BT-474), an anticancer activity that is even higher than that of the well-known anticancer agent cisplatin.

Dual pH-Responsive Shell-Cleavable Polycarbonate Micellar Nanoparticles for in Vivo Anticancer Drug Delivery.

Abstract: To exploit tumor and intracellular microenvironments, pH-responsive diblock copolymers of poly(ethylene glycol) and catechol-functionalized polycarbonate with acid-labile acetal bond as the linker are synthesized to prepare micellar nanoparticles that shed the shell at acidic tumor tissues and inside cancer cells, hence accelerating drug release at the target. The pH-dependent cleavage of the shell is demonstrated at pH 5.0 and 6.5 using 1H NMR. Bortezomib (BTZ, an anticancer drug containing a phenylboronic acid group) is conjugated to the polymers through formation of pH-responsive boronate ester bond between boronic acid and catechol in the polymers. Dual pH-responsive bortezomib–polymer conjugates (BTZ–PC) self-assemble into micellar nanoparticles of small size (<110 nm) with narrow size distribution and high drug loading capacity. Acidic pH accelerates BTZ release from BTZ–PC micelles and enhances intracelluar uptake of the micelles, hence increasing in vitro cytotoxicity against human breast cancer c...

Injectable Coacervate Hydrogel for Delivery of Anticancer Drug-Loaded Nanoparticles in vivo

Abstract: In this study, bortezomib (BTZ, a cytotoxic water-insoluble anticancer drug) was encapsulated in micellar nanoparticles having a catechol-functionalized polycarbonate core through a pH-sensitive covalent bond between phenylboronic acid (PBA) in BTZ and catechol, and these drug-loaded micelles were incorporated into hydrogels to form micelle/hydrogel composites. A series of injectable, biodegradable hydrogels with readily tunable mechanical properties were formed and optimized for sustained delivery of the BTZ-loaded micelles through ionic coacervation between PBA-functionalized polycarbonate/poly(ethylene glycol) (PEG) “ABA” triblock copolymer and a cationic one having guanidinium- or thiouronium-functionalized polycarbonate as “A” block. An in vitro release study showed the pH dependence in BTZ release. At pH 7.4, the BTZ release from the micelle/hydrogel composite remained low at 7%, whereas in an acidic environment, ∼85% of BTZ was released gradually over 9 days. In vivo studies performed in a multiple...

Phenylboronic Acid Functionalized Polycarbonate Hydrogels for Controlled Release of Polymyxin B in Pseudomonas Aeruginosa Infected Burn Wounds.

Abstract: While physically crosslinked polycarbonate hydrogels are effective drug delivery platforms, their hydrophobic nature and lack of side chain functionality or affinity ligands for controlled release of hydrophilic drugs underscore the importance of their chemical compositions. This study evaluates an array of anionic hydrogel systems of phenylboronic acid functionalized triblock copolymers prepared via reversible physical interactions. Variation of key chemical functionalities while maintaining similar core structural features demonstrates the influence of the substitution position and protection of the boronic acid functionality on gel viscoelasticity and mechanical strength at physiological pH. The optimum gel systems obtained from the meta-substituted copolymers (m-PAP) are stable at physiological pH and nontoxic to mammalian dermal cells. The polymyxin B loaded m-PAP hydrogels demonstrate controlled in vitro drug release kinetics and in vitro antimicrobial activity against Pseudomonas aeruginosa over 48 h. In vivo antimicrobial efficacy of the drug loaded hydrogels further corroborates the in vitro results, demonstrating sustained antimicrobial activity against P. aeruginosa burn wound infections. The current strategy described in this study demonstrates a straightforward approach in designing physiologically relevant boronic acid hydrogel systems for controlled release of cationic antimicrobials for future clinical applications.

Nanomaterials in the Prevention, Diagnosis, and Treatment of Mycobacterium Tuberculosis Infections.

Abstract: Despite the tremendous advancements that have been made in biomedical research, Mycobacterium tuberculosis (TB) still remains one of the top 10 causes of death worldwide, outpacing the Human Immunodeficiency Virus as a leading cause of death from an infectious disease. In the light of such significant disease burden, tremendous efforts have been made worldwide to stem this burgeoning spread of disease. The use of nanomaterials in TB management has increased in the past decade, particularly in the areas of early TB detection, prevention, and treatment. Nanomaterials have been proven to be efficacious in the rapid and accurate detection of TB pathogens. Novel nanocarriers have also shown tremendous promise in improving drug delivery, potentially enhancing drug concentrations in target organs while at the same time, reducing treatment frequency. In addition, the engineering of antigen nanocarriers represents an exciting front in TB research, potentially paving the way for the successful development of a new class of effective TB vaccines. This article discusses epidemiology and pathogenesis of TB infections, current TB therapeutics, advanced nanomaterials for anti-TB drug delivery, and TB vaccines. In addition, challenges and future perspectives in developing safe and effective nanomaterials in TB diagnosis and therapy are also presented.

Peptide‐Functionalized Polyurethane Coatings Prepared via Grafting‐To Strategy to Selectively Promote Endothelialization

Abstract: Endothelialization, formation of endothelial cells (ECs) layer on cardiovascular implant surface, is considered an ideal approach to prevent restenosis (renarrowing of blood vessel mainly due to the accumulation of proliferated vascular smooth muscle cells, SMCs) and thrombosis. In this study, the possibility of using polyurethane (PU) as a coating platform for functionalization with peptide to enhance endothelialization on implants is explored. PUs are synthesized through metal-free organocatalytic polymerization followed by chemical conjugation with an EC-specific REDV peptide through thiol-ene reaction. Meanwhile, the free isocyanate groups of PU allow for covalent grafting of REDV-functionalized PU (PU/REDV) to silanize implant materials (nitinol and PET). PU/REDV coating with peptide grafting density of ≈2 nmol cm-2 selectively accommodates primary human umbilical vein ECs (HUVECs) and retards spreading of primary human umbilical artery SMCs (HUASMCs). In addition, a layer of HUVECs is formed within 3 d on PU/REDV-coated surfaces, while proliferation of HUASMCs is inhibited. The selectivity is further confirmed by coculture of HUVECs and HUASMCs. Moreover, the PU/REDV-coated surfaces are less thrombogenic as evidenced by reduced number and activity of adhered platelets. Therefore, PU/REDV can be potentially used as a coating of cardiovascular implants to prevent restenosis and thrombosis by promoting endothelialization.

Fabrication and Characterization of Hybrid Stealth Liposomes

Abstract: Next-generation liposome systems for anticancer and therapeutic delivery require the precise insertion of stabilizing polymers and targeting ligands. Many of these functional macromolecules may be lost to micellization as a competing self-assembly landscape. Here, hybrid stealth liposomes, which utilize novel cholesteryl-functionalized block copolymers as the molecular stabilizer, are explored as a scalable platform to address this limitation. The employed block copolymers offer resistance to micellization through multiple liposome insertion moieties per molecule. A combination of thermodynamic and structural investigations for a series of hybrid stealth liposome systems suggests that a critical number of cholesteryl moieties per molecule defines whether the copolymer will or will not insert into the liposome bilayer. Colloidal stability of formed hybrid stealth liposomes further corroborates the critical copolymer architecture value.

Diatom Microbubbler for Active Biofilm Removal in Confined Spaces.

Abstract: Bacterial biofilms form on and within many living tissues, medical devices, and engineered materials, threatening human health and sustainability. Removing biofilms remains a grand challenge despite tremendous efforts made so far, particularly when they are formed in confined spaces. One primary cause is the limited transport of antibacterial agents into extracellular polymeric substances (EPS) of the biofilm. In this study, we hypothesized that a microparticle engineered to be self-locomotive with microbubbles would clean a structure fouled by biofilm by fracturing the EPS and subsequently improving transports of the antiseptic reagent. We examined this hypothesis by doping a hollow cylinder-shaped diatom biosilica with manganese oxide (MnO2) nanosheets. In an antiseptic H2O2 solution, the diatoms doped by MnO2 nanosheets, denoted as diatom bubbler, discharged oxygen gas bubbles continuously and became self-motile. Subsequently, the diatoms infiltrated the bacterial biofilm formed on either flat or microgrooved silicon substrates and continued to generate microbubbles. The resulting microbubbles merged and converted surface energy to mechanical energy high enough to fracture the matrix of biofilm. Consequently, H2O2 molecules diffused into the biofilm and killed most bacterial cells. Overall, this study provides a unique and powerful tool that can significantly impact current efforts to clean a wide array of biofouled products and devices.

Magnetic resonance imaging quantification and biodistribution of magnetic nanoparticles using T1-enhanced contrast

Abstract: Magnetic iron oxide nanoparticles have been used for various applications such as in the treatment of iron deficiency, as theranostic agents, and as drug carriers. The effective delivery of magnetic iron oxide nanoparticles into the lesion and iron quantification are vital for in vivo theranostic application. To determine the feasibility of using T1 contrast to non-invasively quantify and monitor the IONPs in vivo, monodispersed Gd-doped iron oxide nanoparticles (GdIONPs) with 4 nm core size were fabricated and were used as T1-weighted contrast agents to quantify iron contents based on MRI longitudinal relaxation times (T1). Signal enhancement in positive T1 contrast caused by GdIONPs was observed in this work. The in vivo T1 relaxivity of GdIONPs in a tumor matched well with both in vitro T1 relaxivity and ICP-MS results, demonstrating that the concentration of iron at the tumor site can be directly read from real-time in vivo MRI T1 relaxivity. Hence, by using this strategy, the Fe content in the lesion can be accurately monitored based on MRI longitudinal relaxation times, and this may shed light on effective magnetic hyperthermia cancer therapy in future.

Pore Diameter of Mesoporous Silica Modulates Oxidation of H2O2-Sensing Chromophore in a Porous Matrix

Abstract: Hydrogen peroxide (H2O2) is an attractive chemical because of its bleaching properties in paper and pulp industry and as a disinfectant in the food, water, and medical industries. However, it is important to monitor the residual H2O2 level after its usage and prevent any unintended health problems or chemical reactions. Most H2O2 sensors often utilize fluorophores or electrical circuitry that requires an additional irradiation or a digital display. To this end, this study presents a 3,3′,5,5′-tetramethylbenzidine (TMB)/horseradish peroxidase (HRP)-loaded patch that alerts the presence of high H2O2 levels by generating a visible blue color. We hypothesized that water-insoluble TMB immobilized within mesoporous silica particles of proper pore diameter and structure would act as a colorimetric indicator through the H2O2-mediated oxidation within a cross-linked patch. We examined this hypothesis by immobilizing TMB molecules in mesoporous silica particles with 2 and 7 nm diameter cylindrical pores as well as ...

Enthalpy-driven micellization of oligocarbonate-fluorene end-functionalized Poly(ethylene glycol)☆.

Abstract: A fluorescent pyrene probe method was applied to measure the critical micelle concentration (CMC) of oligocarbonate-fluorene end-functionalized poly(ethylene glycol) (FmE445Fm) triblock copolymers in water. The CMC decreases with lower temperature and higher values of the hydrophobic block length, m. When analyzed by a closed-assembly micelle model, the estimated energetic parameters find a negative ΔH°mic and small positive ΔS°mic suggestive of enthalpy-driven micellization, which differs from entropy-driven oxyethylene/oxybutylene triblock copolymers and octaethylene glycol-n-alkyl ethers. The enthalpy-driven micellization of FmE445Fm may result from the limited hydration of individual hydrophobic F blocks that leads to few hydrogen-bonded waters released during F block association. The π-π stacking oligocarbonate-fluorene system also observed enthalpy-entropy compensation when compared to a series of published data on diblock and triblock copolymer systems. An anomalously low partition equilibrium constant for m = 15.3 implies a tightly-packed core that excludes pyrene intercalation into the fluorene core. This is discussed along with the possible limited applicability to estimate the CMC and potential model drug molecule insertions into the intercalated micelle core.

Utilizing polymers and antibiotics to enhance antimicrobial activity and inhibit antibiotic resistance

Abstract: Techniques regarding treating one or more microbe infections with combination therapy are provided. For example, one or more embodiments described herein can comprise a method, which can comprise enhancing an antimicrobial activity of an antibiotic by a combination therapy. The combination therapy can comprise the antibiotic and a polycarbonate polymer functionalized with a guanidinium functional group.

Method of making sulfur-containing polymers from hexahydrotriazine and dithiol precursors

Abstract: Polythioaminal polymers are made from hexahydrotriazine precursors and dithiol precursors. The precursors are blended together and subjected to mild heating to make the polymers. The polymers have the general structure wherein each R 1 is independently an organic or hetero-organic group, each R 2 is independently a substituent having molecular weight no more than about 120 Daltons, X and Z are each a sulfur-bonded species, at least one of X and Z is not hydrogen, and n is an integer greater than or equal to 1. X and Z may be hydrogen or a functional group, such as a thiol-reactive group. The reactive thiol groups of the polythioaminal may be used to attach thiol-reactive end capping species. By using water soluble or water degradable dithiols, such as polyether dithiols, water soluble polythioaminals may be made. Some such polymers may be used to deliver therapeutics with non-toxic aqueous degradation products.