Showing papers in "Analytical and Bioanalytical Chemistry in 2010"

Label-free cell separation and sorting in microfluidic systems

Abstract: Cell separation and sorting are essential steps in cell biology research and in many diagnostic and therapeutic methods. Recently, there has been interest in methods which avoid the use of biochemical labels; numerous intrinsic biomarkers have been explored to identify cells including size, electrical polarizability, and hydrodynamic properties. This review highlights microfluidic techniques used for label-free discrimination and fractionation of cell populations. Microfluidic systems have been adopted to precisely handle single cells and interface with other tools for biochemical analysis. We analyzed many of these techniques, detailing their mode of separation, while concentrating on recent developments and evaluating their prospects for application. Furthermore, this was done from a perspective where inertial effects are considered important and general performance metrics were proposed which would ease comparison of reported technologies. Lastly, we assess the current state of these technologies and suggest directions which may make them more accessible.

LC-high resolution MS in environmental analysis: from target screening to the identification of unknowns

Abstract: This article provides an overview of the state-of-the-art and future trends of the application of LC–high resolution mass spectrometry to the environmental analysis of polar micropollutants. Highly resolved and accurate hybrid tandem mass spectrometry such as quadrupole/time-of-flight and linear ion trap/orbitrap technology allows for a more reliable target analysis with reference standards, a screening for suspected analytes without reference standards, and a screening for unknowns. A reliable identification requires both high resolving power and high mass spectral accuracy to increase selectivity against the matrix background and for a correct molecular formula assignment to unknown compounds. For the identification and structure elucidation of unknown compounds within a reasonable time frame and with a reasonable soundness, advanced automated software solutions as well as improved prediction systems for theoretical fragmentation patterns, retention times, and ionization behavior are needed.

Mammalian cell transfection: the present and the future.

Abstract: Transfection is a powerful analytical tool enabling study of the function of genes and gene products in cells. The transfection methods are broadly classified into three groups; biological, chemical, and physical. These methods have advanced to make it possible to deliver nucleic acids to specific subcellular regions of cells by use of a precisely controlled laser-microcope system. The combination of point-directed transfection and mRNA transfection is a new way of studying the function of genes and gene products. However, each method has its own advantages and disadvantages so the optimum method depends on experimental design and objective.

Chemical and structural characterization of carbon nanotube surfaces.

Abstract: To utilize carbon nanotubes (CNTs) in various commercial and scientific applications, the graphene sheets that comprise CNT surfaces are often modified to tailor properties, such as dispersion. In this article, we provide a critical review of the techniques used to explore the chemical and structural characteristics of CNTs modified by covalent surface modification strategies that involve the direct incorporation of specific elements and inorganic or organic functional groups into the graphene sidewalls. Using examples from the literature, we discuss not only the popular techniques such as TEM, XPS, IR, and Raman spectroscopy but also more specialized techniques such as chemical derivatization, Boehm titrations, EELS, NEXAFS, TPD, and TGA. The chemical or structural information provided by each technique discussed, as well as their strengths and limitations. Particular emphasis is placed on XPS and the application of chemical derivatization in conjunction with XPS to quantify functional groups on CNT surfaces in situations where spectral deconvolution of XPS lineshapes is ambiguous.

Glycan labeling strategies and their use in identification and quantification

Abstract: Most methods for the analysis of oligosaccharides from biological sources require a glycan derivatization step: glycans may be derivatized to introduce a chromophore or fluorophore, facilitating detection after chromatographic or electrophoretic separation. Derivatization can also be applied to link charged or hydrophobic groups at the reducing end to enhance glycan separation and mass-spectrometric detection. Moreover, derivatization steps such as permethylation aim at stabilizing sialic acid residues, enhancing mass-spectrometric sensitivity, and supporting detailed structural characterization by (tandem) mass spectrometry. Finally, many glycan labels serve as a linker for oligosaccharide attachment to surfaces or carrier proteins, thereby allowing interaction studies with carbohydrate-binding proteins. In this review, various aspects of glycan labeling, separation, and detection strategies are discussed.

Toxicity assessment of nanomaterials: methods and challenges

Abstract: The increasing use of nanomaterials in consumer and industrial products has aroused global concern regarding their fate in biological systems, resulting in a demand for parallel risk assessment. A number of studies on the effects of nanoparticles in in vitro and in vivo systems have been published. However, there is still a need for further studies that conclusively establish their safety/toxicity, due to the many experimental challenges and issues encountered when assessing the toxicity of nanomaterials. Most of the methods used for toxicity assessment were designed and standardized with chemical toxicology in mind. However, nanoparticles display several unique physicochemical properties that can interfere with or pose challenges to classical toxicity assays. Recently, some new methods and modified versions of pre-existing methods have been developed for assessing the toxicity of nanomaterials. This review is an attempt to highlight some important methods employed in nanomaterial toxicology and to provide a critical analysis of the major issues/challenges faced in this emerging field.

Transfer of bisphenol A from thermal printer paper to the skin

Abstract: Of 13 thermal printing papers analyzed, 11 contained 8-17 g/kg bisphenol A (BPA) When taking hold of a receipt consisting of thermal printing paper for 5 s, roughly 1 μ gB PA (02-6 μg) was transferred to the forefinger and the middle finger if the skin was rather dry and about ten times more if these fingers were wet or very greasy This amount transferred to dry skin was neither significantly increased when taking hold of the paper at up to 10 sites, nor reduced when BPA-free paper was contacted afterwards After 60-90 min, BPA applied to the skin as a solution in ethanol was only partially or no longer at all extractable with ethanol, whereas BPA transferred to the skin by holding thermal printer paper remained largely extractable after 2 h This suggests that penetration of the skin depends on the conditions Extractability experiments did not enable us to conclude whether BPA passes through the skin, but indicated that it can enter the skin to such ad epth that it can no longer be washed off If this BPA ends up in the human metabolism, exposure of a person repeatedly touching thermal printer paper for 10 h/day, such as at a cash register, could reach 71 μg/day, which is 42 times less than the present tolerable daily intake (TDI) However, if more than just the finger pads contact the BPA-containing paper or a hand cream enhances permeability of the skin, this margin might be smaller

Toxicities of nano zinc oxide to five marine organisms: influences of aggregate size and ion solubility

Abstract: Nano zinc oxide (nZnO) is increasingly used in sunscreen products, with high potential of being released directly into marine environments. This study primarily aimed to characterize the aggregate size and solubility of nZnO and bulk ZnO, and to assess their toxicities towards five selected marine organisms. Chemical characterization showed that nZnO formed larger aggregates in seawater than ZnO, while nZnO had a higher solubility in seawater (3.7 mg L−1) than that of ZnO (1.6 mg L−1). Acute tests were conducted using the marine diatoms Skeletonema costatum and Thalassiosia pseudonana, the crustaceans Tigriopus japonicus and Elasmopus rapax, and the medaka fish Oryzias melastigma. In general, nZnO was more toxic towards algae than ZnO, but relatively less toxic towards crustaceans and fish. The toxicity of nZnO could be mainly attributed to dissolved Zn2+ ions. Furthermore, molecular biomarkers including superoxide dismutase (SOD), metallothionein (MT) and heat shock protein 70 (HSP70) were employed to assess the sublethal toxicities of the test chemicals to O. melastigma. Although SOD and MT expressions were not significantly increased in nZnO-treated medaka compared to the controls, exposure to ZnO caused a significant up-regulation of SOD and MT. HSP70 was increased two to fourfold in all treatments indicating that there were probably other forms of stress in additional to oxidative stress such as cellular injury.

The use of nanoparticles in electroanalysis: an updated review.

Abstract: The use of nanoparticles in electroanalysis is an area of research which is continually expanding. A wealth of research is available discussing the synthesis, characterization and application of nanoparticles. The unique properties of nanoparticulate materials (e.g. enhanced mass transport, high surface area, improved signal-to-noise ratio) can often be advantageous in electroanalytical techniques. The aim of this paper is to provide an updated overview of the work in this field. In this review we have concentrated on the advances with regards to silver, gold, platinum, palladium, ruthenium, copper and nickel. The synthesis, characterization and practical application of these materials are discussed. We have also identified the conditions under which each metal is likely to be stable, which is likely to be a useful tool for those practising in the field. Furthermore, we have provided a theoretical overview of advances in the theoretical modelling and simulation of nanoparticle behaviour.

Development and application of lateral flow test strip technology for detection of infectious agents and chemical contaminants: a review

Abstract: Recent progress in the laboratory has been a result of improvements in rapid analytical techniques. An update of the applications of lateral flow tests (also called immunochromatographic assay or test strip) is presented in this review manuscrit. We emphasized the description of this technology in the detection of a variety of biological agents and chemical contaminants (e.g. veterinary drugs, toxins and pesticides). It includes outstanding data, such as sample treatment, sensitivity, specificity, accuracy and reproducibility. Lateral flow tests provide advantages in simplicity and rapidity when compared to the conventional detection methods.

Influence of DNA extraction methods, PCR inhibitors and quantification methods on real-time PCR assay of biotechnology-derived traits

Abstract: Biotechnology-derived varieties of canola, cotton, corn and soybean are being grown in the USA, Canada and other predominantly grain exporting countries. Although the amount of farmland devoted to production of biotechnology-derived crops continues to increase, lingering concerns that unintended consequences may occur provide the EU and most grain-importing countries with justification to regulate these crops. Legislation in the EU requires traceability of grains/oilseeds, food and feed products, and labelling, when a threshold level of 0.9% w/w of genetically engineered trait is demonstrated to be present in an analytical sample. The GE content is routinely determined by quantitative PCR (qPCR) and plant genomic DNA provides the template for the initial steps in this process. A plethora of DNA extraction methods exist for qPCR applications. Implementing standardized methods for detection of genetically engineered traits is necessary to facilitate grain marketing. The International Organization for Standardization draft standard 21571 identifies detergent-based methods and commercially available kits that are widely used for DNA extraction, but also indicates that adaptations may be necessary depending upon the sample matrix. This review assesses advantages and disadvantages of various commercially available DNA extraction kits, as well as modifications to published cetyltrimethylammonium bromide methods. Inhibitors are a major obstacle for efficient amplification in qPCR. The types of PCR inhibitors and techniques to minimize inhibition are discussed. Finally, accurate quantification of DNA for applications in qPCR is not trivial. Many confounders contribute to differences in analytical measurements when a particular DNA quantification method is applied and different methods do not always provide concordant results on the same DNA sample. How these differences impact measurement uncertainty in qPCR is considered.

Drug-protein binding: a critical review of analytical tools.

Abstract: The extent of drug binding to plasma proteins, determined by measuring the free active fraction, has a significant effect on the pharmacokinetics and pharmacodynamics of a drug. It is therefore highly important to estimate drug-binding ability to these macromolecules in the early stages of drug discovery and in clinical practice. Traditionally, equilibrium dialysis is used, and is presented as the reference method, but it suffers from many drawbacks. In an attempt to circumvent these, a vast array of different methods has been developed. This review focuses on the most important approaches used to characterize drug-protein binding. A description of the principle of each method with its inherent strengths and weaknesses is outlined. The binding affinity ranges, information accessibility, material consumption, and throughput are compared for each method. Finally, a discussion is included to help users choose the most suitable approach from among the wealth of methods presented.

Ambient mass spectrometry: bringing MS into the “real world”

Abstract: Mass spectrometry has recently undergone a second contemporary revolution with the introduction of a new group of desorption/ionization (DI) techniques known collectively as ambient mass spectrometry. Performed in an open atmosphere directly on samples in their natural environments or matrices, or by using auxiliary surfaces, ambient mass spectrometry (MS) has greatly simplified and increased the speed of MS analysis. Since its debut in 2004 there has been explosive growth in the applications and variants of ambient MS, and a very comprehensive set of techniques based on different desorption and ionization mechanisms is now available. Most types of molecules with a large range of masses and polarities can be ionized with great ease and simplicity with the outstanding combination of the speed, selectivity, and sensitivity of MS detection. This review describes and compares the basis of ionization and the concepts of the most promising ambient MS techniques known to date and illustrates, via typical analytical and bioanalytical applications, how ambient MS is helping to bring MS analysis deeper than ever into the “real world” open atmosphere environment—to wherever MS is needed.

Immunoassays in microfluidic systems

Abstract: Immunoassays have greatly benefited from miniaturization in microfluidic systems. This review, which summarizes developments in microfluidics-based immunoassays since 2000, includes four sections, focusing on the configurations of immunoassays that have been implemented in microfluidics, the main fluid handling modalities that have been used for microfluidic immunoassays, multiplexed immunoassays in microfluidic platforms, and the emergence of label-free detection techniques. The field of microfluidic immunoassays is continuously improving and has great promise for the future.

A review of cyanobacteria and cyanotoxins removal/inactivation in drinking water treatment.

Abstract: This review focuses on the efficiency of different water treatment processes for the removal of cyanotoxins from potable water. Although several investigators have studied full-scale drinking water processes to determine the efficiency of cyanotoxin inactivation, many of the studies were based on ancillary practice. In this context, “ancillary practice” refers to the removal or inactivation of cyanotoxins by standard daily operational procedures and without a contingency operational plan utilizing specific treatment barriers. In this review, “auxiliary practice” refers to the implementation of inactivation/removal treatment barriers or operational changes explicitly designed to minimize risk from toxin-forming algae and their toxins to make potable water. Furthermore, the best drinking water treatment practices are based on extension of the multibarrier approach to remove cyanotoxins from water. Cyanotoxins are considered natural contaminants that occur worldwide and specific classes of cyanotoxins have shown regional prevalence. For example, freshwaters in the Americas often show high concentrations of microcystin, anatoxin-a, and cylindrospermopsin, whereas Australian water sources often show high concentrations of microcystin, cylindrospermopsin, and saxitoxins. Other less frequently reported cyanotoxins include lyngbyatoxin A, debromoaplysiatoxin, and β-N-methylamino-l-alanine. This review focuses on the commonly used unit processes and treatment trains to reduce the toxicity of four classes of cyanotoxins: the microcystins, cylindrospermopsin, anatoxin-a, and saxitoxins. The goal of this review is to inform the reader of how each unit process participates in a treatment train and how an auxiliary multibarrier approach to water treatment can provide safer water for the consumer.

Process analytical technology (PAT) for biopharmaceutical products.

Abstract: The “Pharmaceutical Current Good Manufacturing Practices (CGMPs) for the 21st Century—A Risk Based Approach” initiative announced by the FDA in August 2002 to improve and modernize pharmaceutical manufacturing facilitated adoption of process analytical technology (PAT) by the pharmaceutical industry. The potential for improved operational control and compliance resulting from continuous real-time quality assurance was highlighted as a likely benefit that would result from PAT implementation. A considerable amount of work has been done on this topic by academic and industrial contributors in the last decade. In this paper, we will start with a brief overview of evolution of PAT concepts and a review of their application in the wider pharmaceutical industry. The rest of the paper focuses on PAT applications for biotech processes with emphasis on developments in the last five years. It is our observation that while significant advances have been accomplished with regard to our ability to analyze/monitor key process and quality attributes in the biotech industry, much more needs to be done with regard to utilizing the collected data for subsequent control of the process, to achieve optimum yield and product quality. The latter is necessary to achieve the benefits that will result from PAT implementation.

Application of Surface Chemical Analysis Tools for Characterization of Nanoparticles

Abstract: The important role that surface chemical analysis methods can and should play in the characterization of nanoparticles is described. The types of information that can be obtained from analysis of nanoparticles using Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), time-of-flight secondary-ion mass spectrometry (TOF-SIMS), low-energy ion scattering (LEIS), and scanning-probe microscopy (SPM), including scanning tunneling microscopy (STM) and atomic force microscopy (AFM), are briefly summarized. Examples describing the characterization of engineered nanoparticles are provided. Specific analysis considerations and issues associated with using surface-analysis methods for the characterization of nanoparticles are discussed and summarized, with the impact that shape instability, environmentally induced changes, deliberate and accidental coating, etc., have on nanoparticle properties.

New trends in fast and high-resolution liquid chromatography: a critical comparison of existing approaches.

Abstract: Recent developments in chromatographic supports and instrumentation for liquid chromatography (LC) are enabling rapid and highly efficient separations Various analytical strategies have been proposed, for example the use of silica-based monolithic supports, elevated mobile phase temperatures, and columns packed with sub-3 microm superficially porous particles (fused core) or with sub-2 microm porous particles for use in ultra-high-pressure LC (UHPLC) The purpose of this review is to describe and compare these approaches in terms of throughput and resolving power, using kinetic data gathered for compounds with molecular weights ranging between 200 and 1300 g mol(-1) in isocratic and gradient modes This study demonstrates that the best analytical strategy should be selected on the basis of the analytical problem (eg, isocratic vs gradient, throughput vs efficiency) and the properties of the analyte UHPLC and fused-core technologies are quite promising for small-molecular-weight compounds, but increasing the mobile phase temperature is useful for larger molecules, for example peptides

Beta-keto amphetamines: studies on the metabolism of the designer drug mephedrone and toxicological detection of mephedrone, butylone, and methylone in urine using gas chromatography–mass spectrometry

Abstract: In recent years, a new class of designer drugs has appeared on the drugs of abuse market in many countries, namely, the so-called beta-keto (bk) designer drugs such as mephedrone (bk-4-methylmethamphetamine), butylone (bk-MBDB), and methylone (bk-MDMA). The aim of the present study was to identify the metabolites of mephedrone in rat and human urine using GC-MS techniques and to include mephedrone, butylone, and methylone within the authors’ systematic toxicological analysis (STA) procedure. Six phase I metabolites of mephedrone were detected in rat urine and seven in human urine suggesting the following metabolic steps: N-demethylation to the primary amine, reduction of the keto moiety to the respective alcohol, and oxidation of the tolyl moiety to the corresponding alcohols and carboxylic acid. The STA procedure allowed the detection of mephedrone, butylone, methylone, and their metabolites in urine of rats treated with doses corresponding to those reported for abuse of amphetamines. Besides macro-based data evaluation, an automated evaluation using the automated mass spectral deconvolution and identification system was performed. Mephedrone and butylone could be detected also in human urine samples submitted for drug testing. Assuming similar kinetics in humans, the described STA procedure should be suitable for proof of an intake of the bk-designer drugs in human urine.

Paper-based microfluidic devices for analysis of clinically relevant analytes present in urine and saliva

Abstract: We report the use of paper-based microfluidic devices fabricated from a novel polymer blend for the monitoring of urinary ketones, glucose, and salivary nitrite. Paper-based devices were fabricated via photolithography in less than 3 min and were immediately ready for use for these diagnostically relevant assays. Patterned channels on filter paper as small as 90 μm wide with barriers as narrow as 250 μm could be reliably patterned to permit and block fluid wicking, respectively. Colorimetric assays for ketones and nitrite were adapted from the dipstick format to this paper microfluidic chip for the quantification of acetoacetate in artificial urine, as well as nitrite in artificial saliva. Glucose assays were based on those previously demonstrated (Martinez et al., Angew Chem Int Ed 8:1318–1320, 1; Martinez et al., Anal Chem 10:3699–3707, 2; Martinez et al., Proc Nat Acad Sci USA 50:19606–19611, 3; Lu et al., Electrophoresis 9:1497–1500, 4; Abe et al., Anal Chem 18:6928–6934, 5). Reagents were spotted on the detection pad of the paper device and allowed to dry prior to spotting of samples. The ketone test was a two-step reaction requiring a derivitization step between the sample spotting pad and the detection pad, thus for the first time, confirming the ability of these paper devices to perform online multi-step chemical reactions. Following the spotting of the reagents and sample solution onto the paper device and subsequent drying, color images of the paper chips were recorded using a flatbed scanner, and images were converted to CMYK format in Adobe Photoshop CS4 where the intensity of the color change was quantified using the same software. The limit of detection (LOD) for acetoacetate in artificial urine was 0.5 mM, while the LOD for salivary nitrite was 5 μM, placing both of these analytes within the clinically relevant range for these assays. Calibration curves for urinary ketone (5 to 16 mM) and salivary nitrite (5 to 2,000 μM) were generated. The time of device fabrication to the time of test results was about 25 min.

Inkjet-printed paperfluidic immuno-chemical sensing device

Abstract: This paper reports on an inkjet printing method for the fabrication of lateral flow immunochromatographic devices made from a single piece of filter paper by patterning microfluidic channels and dispensing immunosensing inks, requiring only a single printing apparatus. This “paperfluidic” immunosensing device allows for a less time-consuming and more low-cost fabrication compared with the conventional immunochromatographic strips requiring multiple pads, plastic or nylon backing, and a plastic case. A sandwich immunoreaction was performed on the patterned immunosensing paper device, and the sensitivity of the device was optimized with an IgG model analyte. Inkjet-printed antibodies on the test line and the control line were immobilized by physical adsorption, resulting in a very simple fabrication method applicable for pure cellulose surfaces. The color intensity in the test line and the control line was determined both by naked eye and by means of a color scanner in combination with a simple computer program. With the resulting paperfluidic immunosensing device, human IgG concentrations at least down to 10 μg/l could be detected within 20 min. Additionally, in order to demonstrate the feasibility of a total multianalyte sensing system, a combined immuno-chemical sensing device was also fabricated by patterning an additional microfluidic channel for a chemical assay onto the same paper substrate. This low-cost multianalyte paperfluidic sensing device thus demonstrates the feasibility of simple, portable, and disposable tools for pathogen detection in the field of medical, environmental, and food analyses, possibly resulting in useful devices in remote settings and less-industrialized countries.

The comet assay in nanotoxicology research.

Abstract: Nanoscale particles can have impressive and useful characteristics, but the same properties may be problematic for human health. From this perspective it is critical to assess the ability of nanoparticles to cause DNA damage. This review focuses on the use of the comet assay in nanotoxicology research. In the alkaline version of the assay, DNA strand breaks and alkali-labile sites are detected and oxidatively damaged DNA can be analyzed using the enzyme formamidopyrimidine glycosylase. The article reviews studies that have used the comet assay to investigate the toxicity of manufactured nanoparticles. It is shown that at least 46 cellular in vitro studies and several in vivo studies have used the comet assay and that the majority of the nanoparticles tested cause DNA strand breaks or oxidative DNA lesions. This is not surprising considering the sensitivity of the method and the reactivity of many nanomaterials. Interactions between the particles and the assay cannot be totally excluded and need further consideration. It is concluded that studies including several particle types, to enable the assessment of their relative potency, are valuable as are studies focusing both on comet assay end points and mutagenicity. Finally, the article discusses the potential future use of the comet assay in human biomonitoring studies, which could provide valuable information for hazard identification of nanoparticles.

Comparison of two derivatization-based methods for solid-phase microextraction–gas chromatography–mass spectrometric determination of bisphenol A, bisphenol S and biphenol migrated from food cans

Abstract: An environmentally friendly sample pretreatment system based on solid-phase microextraction (SPME) for the sensitive determination of bisphenol A (BPA), bisphenol S (BPS) and biphenol (BP) is described. Two derivatisation reactions to obtain volatile derivatives are compared. Derivatisation with acetic anhydride (AA) was performed in situ in a 5-mM Na2CO3/NaHCO3 buffer solution and analytes were extracted by direct immersion (DI) using a PA fibre (85 µm) at 90°C for 40 min with stirring at 1,500 rpm. For derivatisation with bis-(trimethylsilyl)trifluoroacetamide (BSTFA), the analytes were first extracted by DI using the PA fibre at 70°C for 40 min with stirring at 500 rpm. The fibre was then removed, dried in a nitrogen stream for 2 min and introduced into the headspace of BSTFA at 50°C for 30 s. After derivatisation, the analytes were desorbed in the injection port of the GC in the splitless mode at 280°C for 4 min. The separation was carried out by coupling gas chromatography with mass spectrometry in the selected ion monitoring mode, GC-MS(SIM). The method allowed the determination of the migrating levels of bisphenols found in food cans, and it was validated for linearity, detection and quantitation limits, selectivity, accuracy and precision. Detection limits ranged from 3 to 16 pg mL−1, depending on the compound, at a signal-to-noise ratio of 3. Recoveries obtained for spiked samples were satisfactory for all compounds. Levels of BPA were higher than those of BPS and the lowest contents were found for BP.

Chromium speciation in solid matrices and regulation: a review

Abstract: In recent years, the extensive use of chromium in industrial processes has led to the promotion of several directives and recommendations by the European Union, that try to limit and regulate the presence of Cr(VI) in the environment and to protect industrial workers using chromium and end-users of manufactured products As a consequence, new standard methods and analytical procedures have been published at the EU level for Cr(VI) determination in soil, sludge, sediment, and similar waste materials, workplace atmospheres, cement, packaging materials, industrially produced samples, and corrosion-protection layers on some components of vehicles and electrical and electronic equipment The objective of this article is to summarize the different directives and recommendations and to critically review the currently existing standard methods and the methods published in the literature for chromium speciation in the above mentioned solid matrices, putting the emphasis on the different extraction procedures which have been developed for each matrix Particular attention has been paid to Cr(III) and Cr(VI) inter-conversions that can occur during extraction and efforts to minimize these unwanted reactions Although the use of NaOH-Na2CO3 solutions with hot plate extraction seems to be the more widespread procedure, species transformation can still occur and several studies suggest that speciated isotope-dilution mass spectrometry (SIDMS) could be a suitable tool for correction of these interconversions Besides, recent studies have proved the role of Cr(III) in chromium toxicology As a consequence, the authors suggest an update of standard methods in the near future

Recent developments and applications of microextraction techniques in drug analysis

Abstract: Sample preparation is important for isolating desired components from complex matrices and greatly influences their reliable and accurate analysis. Recent trends in sample preparation include miniaturization, automation, high-throughput performance, online coupling with analytical instruments, and low-cost operation through extremely low or no solvent consumption. Microextraction techniques, such as liquid-phase microextraction and solid-phase microextraction, have these advantages over the traditional approaches of liquid-liquid extraction and conventional solid-phase extraction. This review focuses primarily on these microextraction techniques developed over the last decade, and presents a summary of the characteristics of various approaches in drug analysis.

Molecularly imprinted polymers: synthetic receptors in bioanalysis

Abstract: Molecularly imprinted polymers (MIPs) are tailor-made synthetic materials possessing specific cavities designed for a target molecule. Since they recognise their target analyte with affinities and selectivities comparable to those of antibody-antigen, enzyme-substrate and ligand-receptor interactions, they are often referred to as synthetic receptors or plastic antibodies. In this review, we describe the great potential and recent developments of MIPs in affinity separations, with emphasis on their application to the solid-phase extraction (SPE) of analytes from complex matrices. Research efforts made in this field to obtain water-compatible polymers for their applicability in aqueous environments are described. We particularly discuss problems encountered in the use of MIPs in SPE and the attempts carried out to improve their efficiency.

Profiling of the reactive oxygen species-related ecotoxicity of CuO, ZnO, TiO2, silver and fullerene nanoparticles using a set of recombinant luminescent Escherichia coli strains: differentiating the impact of particles and solubilised metals.

Abstract: We propose a novel combination of high-throughput luminescent bacterial tests for the evaluation of the reactive oxygen species (ROS)-generating potential of engineered nanoparticles (eNPs) and the role of solubilised metal ions in this process. The set of tests consists of differently engineered recombinant Escherichia coli strains: (1) a new sensor strain, which bioluminescence is induced by superoxide anions; (2) six recombinant E. coli strains (superoxide dismutase (sod) single, double and triple mutants and a respective wild-type strain), transformed with luxCDABE genes responding to toxic compounds by decreasing their luminescence; and (3) three strains in which bioluminescence is specifically induced by bioavailable metals (Cu, Zn and Ag). The applicability of this battery of tests in profiling oxidative potential of eNPs was evaluated on nTiO2, nCuO, nZnO and nAg (25, 30, 70 and 4,000 mg l−1) although nTiO2 (but not bTiO2) induced the bioluminescence of the superoxide anion sensing bacteria starting from 100 mg l−1. Thus, our innovative combined approach is expected to provide more consistent and informative data concerning the general toxicity, ROS-production potential and also solubilisation of metals in the case of metallic NPs.

Effect of food processing on plant DNA degradation and PCR-based GMO analysis: a review

Abstract: The applicability of a DNA-based method for GMO detection and quantification depends on the quality and quantity of the DNA. Important food-processing conditions, for example temperature and pH, may lead to degradation of the DNA, rendering PCR analysis impossible or GMO quantification unreliable. This review discusses the effect of several food processes on DNA degradation and subsequent GMO detection and quantification. The data show that, although many of these processes do indeed lead to the fragmentation of DNA, amplification of the DNA may still be possible. Length and composition of the amplicon may, however, affect the result, as also may the method of extraction used. Also, many techniques are used to describe the behaviour of DNA in food processing, which occasionally makes it difficult to compare research results. Further research should be aimed at defining ingredients in terms of their DNA quality and PCR amplification ability, and elaboration of matrix-specific certified reference materials.

Comparative toxicity study of Ag, Au, and Ag–Au bimetallic nanoparticles on Daphnia magna

Abstract: A comparative assessment of the 48-h acute toxicity of aqueous nanoparticles synthesized using the same methodology, including Au, Ag, and Ag–Au bimetallic nanoparticles, was conducted to determine their ecological effect in freshwater environments through the use of Daphnia magna, using their mortality as a toxicological endpoint. D. magna are one of the standard organisms used for ecotoxicity studies due to their sensitivity to chemical toxicants. Particle suspensions used in toxicity testing were well-characterized through a combination of absorbance measurements, atomic force or electron microscopy, flame atomic absorption spectrometry, and dynamic light scattering to determine composition, aggregation state, and particle size. The toxicity of all nanoparticles tested was found to be dose and composition dependent. The concentration of Au nanoparticles that killed 50% of the test organisms (LC50) ranged from 65–75 mg/L. In addition, three different sized Ag nanoparticles (diameters = 36, 52, and 66 nm) were studied to analyze the toxicological effects of particle size on D. magna; however, it was found that toxicity was not a function of size and ranged from 3–4 μg/L for all three sets of Ag nanoparticles tested. This was possibly due to the large degree of aggregation when these nanoparticles were suspended in standard synthetic freshwater. Moreover, the LC50 values for Ag–Au bimetallic nanoparticles were found to be between that of Ag and Au but much closer to that of Ag. The bimetallic particles containing 80% Ag and 20% Au were found to have a significantly lower toxicity to Daphnia (LC50 of 15 μg/L) compared to Ag nanoparticles, while the toxicity of the nanoparticles containing 20% Ag and 80% Au was greater than expected at 12 μg/L. The comparison results confirm that Ag nanoparticles were much more toxic than Au nanoparticles, and that the introduction of gold into silver nanoparticles may lower their environmental impact by lowering the amount of Ag which is bioavailable.

Hydrogen exchange mass spectrometry: what is it and what can it tell us?

Abstract: Proteins are undoubtedly some of the most essential molecules of life. While much is known about many proteins, some aspects still remain mysterious. One particularly important aspect of understanding proteins is determining how structure helps dictate function. Continued development and implementation of biophysical techniques that provide information about protein conformation and dynamics is essential. In this review, we discuss hydrogen exchange mass spectrometry and how this method can be used to learn about protein conformation and dynamics. The basic concepts of the method are described, the workflow illustrated, and a few examples of its application are provided.