Showing papers in "Fresenius Journal of Analytical Chemistry in 2000"
TL;DR: An overview of the various types of biosensors and biochips that have been developed for biological and medical applications, along with significant advances over the last several years in these technologies are provided.
Abstract: In the past two decades, the biological and medical fields have seen great advances in the development of biosensors and biochips capable of characterizing and quantifying biomolecules This review is meant to provide an overview of the various types of biosensors and biochips that have been developed for biological and medical applications, along with significant advances over the last several years in these technologies It also attempts to describe various classification schemes that can be used for categorizing the different biosensors and provide relevant examples of these classification schemes from recent literature
542 citations
TL;DR: The effect of membrane biofouling on sensor sensitivity from the standpoint of glucose transport limitations is addressed.
Abstract: The material-tissue interaction that results from sensor implantation is one of the major obstacles in developing viable, long-term implantable biosensors. Strategies useful for the characterization and modification of sensor biocompatibility are widely scattered in the literature, and there are many peripheral studies from which useful information can be gleaned. The current paper reviews strategies suitable for addressing biofouling, one aspect of biosensor biocompatibility. Specifically, this paper addresses the effect of membrane biofouling on sensor sensitivity from the standpoint of glucose transport limitations. Part I discusses the in vivo and in vitro methods used to characterize biofouling and the effects of biofouling on sensor performance, while Part II presents techniques intended to improve biosensor biocompatibility.
352 citations
TL;DR: The basic philosophies, concepts and current advances in the field of μ-TAS development are discussed, with special emphasis on applications in the arena of biosciences.
Abstract: This review article discusses and documents the basic philosophies, concepts and current advances in the field of μ-TAS development, with special emphasis on applications in the arena of biosciences. After a brief overview of miniaturization theory and fabrication techniques, areas of microfluidic component development, detection protocols, biochemical assays, and integrated biological analyses are addressed.
331 citations
TL;DR: Problems and specific features of architectures for amperometric biosensors using different electron-transfer pathways such as mediated electron transfer, electron-hopping in redox polymers, electron transfer using mediator-modified enzymes and carbon-paste electrodes, direct electron transfer by means of self-assembled monolayers or via conducting-polymer chains are discussed.
Abstract: The function of amperometric biosensors is related to electron-transfer processes between the active site of an (immobilized) enzyme and an electrode surface which is poised to an appropriate working potential. Problems and specific features of architectures for amperometric biosensors using different electron-transfer pathways such as mediated electron transfer, electron-hopping in redox polymers, electron transfer using mediator-modified enzymes and carbon-paste electrodes, direct electron transfer by means of self-assembled monolayers or via conducting-polymer chains are discussed.
288 citations
TL;DR: The advent of nano-electrospray ionization (nano-ESI) has considerably extended the usability of ESI in the analytical mass spectrometric laboratory, and the area of E SI-MS applications is significantly enhanced.
Abstract: The advent of nano-electrospray ionization (nano-ESI) has considerably extended the usability of ESI in the analytical mass spectrometric laboratory. One of the remarkable features of nano-ESI is its extremely low sample consumption. Only a few microliters of analyte solution (10–5–10–8 M) are sufficient for molecular weight determination and structural investigations by MS/MS. But nano-ESI is more than just a minimized-flow ESI; the low solvent flow rate also affects the mechanism of ion formation. As a consequence, the area of ESI-MS applications is significantly enhanced. Oligosaccharides, glycosides as well as glycoproteins can be analyzed more easily than with normal ion spray. The same holds for the analysis of non-covalent complexes sprayed directly from aqueous solutions.
269 citations
TL;DR: Results on complexation, solvent extraction and membrane transport with the emphasis on ion and molecular recognition which can be used for analytical purposes are presented, without attempting to cover all available references.
Abstract: Discovered in the 1940’s, [1n]metacyclophanes with the common name calix[n]arenes which is derived from for the molecule’s shape enjoyed a remarkable interest in almost all fields of chemistry since the 1980’s, which is highlighted by several books [1–8]. Over 50 reviews concerning their synthesis, properties and applicabilities were published, many of those with emphasis on organic synthesis and structural properties are cited in ¶[P. 5–6 in 2]. Of interest for analytical chemists are reviews on calixarenes and the structurally related resorcin[n]arenes (or calix[n]resorcarenes) and calixpyrroles concerning potentiometric sensors [9–12], chromo- and fluorophores [13, 14], molecular switches [15], metal ion binding in solution [16–19], redox properties [20] and anion binding [21–24]. Other recent reviews deal with thermodynamic aspects [25], organometallic compounds [26], P-containing calixarenes [27–29], as well as molecular dynamics modeling [30–33]. It is a vital field with over 200 publications per year. Therefore, this article presents only selected results on complexation, solvent extraction and membrane transport with the emphasis on ion and molecular recognition which can be used for analytical purposes, without attempting to cover all available references.
257 citations
TL;DR: This article reviews recent advances of carbohydrate analysis by high-performance anion-exchange chromatography with pulsed amperometric detection, and a comprehensive collection of applications to carbohydrates and samples of interest is given.
Abstract: This article reviews recent advances of carbohydrate analysis by high-performance anion-exchange chromatography with pulsed amperometric detection. Starting from the paper of Dennis C. Johnson [1] in which the great analytical promise of such a technique was anticipated, a multitude of exciting new research possibilities have recently emerged. The great attractiveness of high-performance anion-exchange chromatography is largely due to its compatibility with such a sensitive, selective and reliable detection method as pulsed amperometry. This very good match between liquid chromatography and electrochemical detection has allowed the determination of carbohydrates in a variety of complex matrices, for instance, foods, beverages, diary and biotechnological products, vegetal tissues, and also in the area of clinical diagnostics. For this reason, the introduction of HPAEC-PAD into regulated methods is becoming increasingly accepted. A comprehensive collection of applications to carbohydrates and samples of interest is given, with special focus on the separation of closely related sugar compounds using dilute alkaline eluents. Advances in pulsed potential waveforms are also discussed, and a comparison with other liquid chromatographic methods addressed.
243 citations
TL;DR: The systems described in this review, designed to detect different groups of target chemicals, vary greatly in their detection limits, specificity, response times and more, reflecting on their potential applicability which, for most of the constructs described, is presently rather limited.
Abstract: In parallel to the continuous development of increasingly more sophisticated physical and chemical analytical technologies for the detection of environmental pollutants, there is a progressively more urgent need also for bioassays which report not only on the presence of a chemical but also on its bioavailability and its biological effects. As a partial fulfillment of that need, there has been a rapid development of biosensors based on genetically engineered bacteria. Such microorganisms typically combine a promoter-operator, which acts as the sensing element, with reporter gene(s) coding for easily detectable proteins. These sensors have the ability to detect global parameters such as stress conditions, toxicity or DNA-damaging agents as well as specific organic and inorganic compounds. The systems described in this review, designed to detect different groups of target chemicals, vary greatly in their detection limits, specificity, response times and more. These variations reflect on their potential applicability which, for most of the constructs described, is presently rather limited. Nevertheless, present trends promise that additional improvements will make microbial biosensors an important tool for future environmental analysis.
184 citations
TL;DR: The most important hydrazine reagents are critically summarized, and their major applications in different fields, including environmental analysis, food chemistry and industrial analysis are introduced.
Abstract: Hydrazine reagents are a well-known group of derivatizing agents for the determination of aldehydes and ketones in liquid and gaseous samples. Within this article, the most important hydrazine reagents are critically summarized, and their major applications in different fields, including environmental analysis, food chemistry and industrial analysis are introduced. As 2,4-dinitrophenylhydrazine (DNPH) is the basic reagent for several international standard procedures, its properties are discussed in detail. Particular focus is directed on the chemistry of the hydrazine reagents, and chemical interferences are considered. Recent methods for the determination of various oxidants using hydrazine reagents are presented as well. Due to limited space, this review does not cover the related field of carbohydrate analysis, although many chemical aspects are similar.
164 citations
TL;DR: A thorough review of the literature published (1983 – March 1999) on chromium speciation in liquid samples is presented, and analytical techniques used in the 404 articles are summarized.
Abstract: A thorough review of the literature published (1983 - March 1999) on chromium speciation in liquid samples is presented, and analytical techniques used in the 404 articles are summarized. The discussion focuses on atomic spectrometric techniques, which are mainly employed for chromium speciation in liquid matrices (134 articles). Details on the type of pretreatment, species, samples, techniques and analytical features of the methodologies proposed are given.
141 citations
TL;DR: Different classes of cell-based biosensors are introduced, including devices to measure cell-cell contact and set-ups to determine metabolic products, which are able to detect neuro-active compounds.
Abstract: Different classes of cell-based biosensors are introduced. These include devices to measure cell-cell contact and set-ups to determine metabolic products. Main emphasis is put on sensors based on nerve-cell networks which are able to detect neuro-active compounds. The different experimental set-ups are explained and examples for typical applications are given. A main point concerns new achievements and prospects for future developments.
TL;DR: The general problems associated with characterization of these directly from gel separated proteins are described and the current state of art for the determination of phosphorylation, glycosylation and proteolytic processing is illustrated.
Abstract: High-throughput DNA sequencing has resulted in increasing input in protein sequence databases. Today more than 20 genomes have been sequenced and many more will be completed in the near future, including the largest of them all, the human genome. Presently, sequence databases contain entries for more than 425.000 protein sequences. However, the cellular functions are determined by the set of proteins expressed in the cell--the proteome. Two-dimensional gel electrophoresis, mass spectrometry and bioinformatics have become important tools in correlating the proteome with the genome. The current dominant strategies for identification of proteins from gels based on peptide mass spectrometric fingerprinting and partial sequencing by mass spectrometry are described. After identification of the proteins the next challenge in proteome analysis is characterization of their post-translational modifications. The general problems associated with characterization of these directly from gel separated proteins are described and the current state of art for the determination of phosphorylation, glycosylation and proteolytic processing is illustrated.
TL;DR: An optical sensor based on a chloride-quenchable fluorescent probe (lucigenin) immobilized on a Nafion film that was used to determine the salinity in seawater and brackish water of the North Sea.
Abstract: An optical sensor for the measurement of salinity in seawater has been developed. It is based on a chloride-quenchable fluorescent probe (lucigenin) immobilized on a Nafion film. Two approaches for measuring salinity via chloride concentration are presented. In the first, a change in salinity corresponds to a change in the fluorescence intensity of lucigenin. In the second, the fluorescence intensity information is converted into a phase angle information by adding an inert phosphorescent reference luminophore (a ruthenium complex entrapped in poly(acrylonitrile) beads). Under these conditions, the chloride-dependent fluorescence intensity of lucigenin can be converted into a chloride-dependent fluorescence phase shift which serves as the analytical information. This scheme is referred to as dual lifetime referencing (DLR). The sensor was used to determine the salinity in seawater and brackish water of the North Sea.
TL;DR: An analytical method for the determination of the major endogenous and exogenous estrogenic steriods in effluent water samples of sewage treatment plants (STPs) with a LOQ down to 1 ng/L and below has been developed and the exogenous and endogenous estrogen 17α-ethynylestradiol show the highest estrogenic potential.
Abstract: An analytical method for the determination of the major endogenous and exogenous estrogenic steriods in effluent water samples of sewage treatment plants (STPs) with a LOQ down to 1 ng/L and below has been developed. The exogenous estrogen 17α-ethynylestradiol, frequently used as estrogenic component in oral contraceptives, and the endogenous estrogen 17β-estradiol show the highest estrogenic potential, therefore they were part of our target compounds. In addition, the content of the synthetic gestagen levonorgestrel, also often administered in oral contraceptives, was determined. A solid-phase extraction system for high volume sampling of water up to 25 L was implemented. Two types of adsorbent, Amberlite XAD 2 and a mixture of LiChrolut EN/Bondesil C-18, respectively, were tested for their extraction efficiency of these polar analytes. Recovery rates with LiChrolut EN/¶Bondesil C-18 ranged up to 94 %, whereas sampling on XAD 2 led only to poor recoveries below 40 %. After a liquid chromatographic clean-up step on silicagel the steroids were converted into their trimethylsilyl-ethers by the reaction with MSTFA/TMSI (N-methyl-N-trimethylsilyl-2,2,2-trifluoroacetamide, trimethylsilyliodide) and were then determined by HRGC/MS in the selected ion mode. A limit of quantification over the whole procedure of at least 1 ng/L was reached for all analytes. In several effluent samples the input of estrogens by the STP of the cities Ulm and New Ulm into the river Danube was characterised. The concentrations commonly found ranged from 1 ng/L up to 13 ng/L, depending on the respective steroid.
TL;DR: The goal of the review is to attract the attention of researchers and users to stripping voltammetry in particular, its application in environmental monitoring and analysis of foodstuffs.
Abstract: The review covers over 230 papers published mostly in the last 5 years. The goal of the review is to attract the attention of researchers and users to stripping voltammetry in particular, its application in environmental monitoring and analysis of foodstuffs. The sensors employed are impregnated graphite, carbon paste, thick film carbon/graphite and thin film metallic electrodes modified in-situ or beforehand. Hanging mercury drop electrodes and mercury coated glassy carbon electrodes are also mentioned. Strip and long-lived sensors for portable instruments and flow through systems are discussed as devices for future development and application of stripping voltammetry.
TL;DR: In this paper, the authors highlight some of the successfully applied systems in LA-ICP-MS using 266 nm and 193 nm laser ablation systems and explain the current fields of applications.
Abstract: The increased interest in laser technology (e.g. for micro-machining, for medical applications, light shows, CD-players) is a tremendous driving force for the development of new laser types and optical set-ups. This directly influences their use in analytical chemistry. For direct analysis of the elemental composition of solids, mostly solid state lasers, such as Nd:YAG laser systems operating at 1064 nm (fundamental wavelength), 266 nm (frequency quadrupled) and even 213 nm (frequency quintupled) have been investigated in combination with all available inductively coupled plasma mass spectrometers. The trend towards shorter wavelengths (1064 nm– 157 nm) was initiated by access to high quality optical materials which led to the incorporation of UV gas lasers, such as excimer lasers (XeCl 308 nm, KrF 248 nm, ArF 193 nm, and F2 157 nm) into laser ablation set-ups. The flexibility in laser wavelengths, output energy, repetition rate, and spatial resolution allows qualitative and quantitative local and bulk elemental analysis as well as the determination of isotope ratios. However, the ablation process and the ablation behavior of various solid samples are different and no laser wavelength was found suitable for all types of solid samples. This article highlights some of the successfully applied systems in LA-ICP-MS. The current fields of applications are explained on selected examples using 266 nm and 193 nm laser ablation systems.
TL;DR: This review critically discusses many of the implemented and potential options for such coupled systems or components, which might be useful for such systems, including immunoaffinity extraction, immuno Affinity chromatography, immunochemical detectors, immunoblotting, receptor assays, enzyme inhibition Assays, displacement assays and flow-injection immunoassays.
Abstract: Hyphenated techniques have become very popular during the last decade. Nevertheless, the use of biochemical methods, such as immunoassays, in conjunction with instrumental methods, such as chromatography, have not gained widespread acceptance. This review critically discusses many of the implemented and potential options for such coupled systems or components, which might be useful for such systems, including immunoaffinity extraction, immunoaffinity chromatography, immunochemical detectors, immunoblotting, receptor assays, enzyme inhibition assays, displacement assays, flow-injection immunoassays, miniaturized techniques and stationary phases such as restricted access materials or molecularly imprinted polymers. The performance of immunochromatographic systems is discussed regarding their ability to solve highly complex and demanding analytical problems.
TL;DR: The preconcentration method has been applied to determine the six metal ions in river water samples after destroying the organic matter with concentrated nitric acid and cobalt content of vitamin tablets with RSD of ∼ 3.0%.
Abstract: A new chelating resin, Xylenol Orange coated Amberlite XAD-7, was prepared and used for preconcentration of Cd(II), Co(II), Cu(II), Fe(III), Ni(II) and Zn(II) prior to their determination by flame atomic absorption spectrophotometry. The optimum pH values for quantitative sorption of Cd(II), Co(II), Cu(II), Fe(III), Ni(II) and Zn(II) are 4.5–5.0, 4.5, 4.0–5.0, 4.0, 5.0 and 5.0–7.0, respectively, and their desorptions by 2 mol L–1 HCl are instantaneous. The sorption capacity of the resin has been found to be 2.0, 2.6, 1.6, 1.6, 2.6 and 1.8 mg g–1 of resin for Cd, Co, Cu, Fe, Ni and Zn, respectively. The tolerance limits of electrolytes, NaCl, NaF, NaI, NaNO3, Na2SO4 and of cations, Mg2+ and Ca2+ in the sorption of the six metal ions are reported. The preconcentration factor was between 50 and 200. The t1/2 values for sorption are found to be 5.3, 2.9, 3.2, 3.3, 2.5 and 2.6 min for the six metals, respectively. The recoveries are between 96.0 and 100.0% for the different metals at preconcentration limits between 10 to 40 ng mL–1. The preconcentration method has been applied to determine the six metal ions in river water samples after destroying the organic matter (if present in very large amount) with concentrated nitric acid (RSD ≤ 8%, except for Cd for which it is upto 12.6%) and cobalt content of vitamin tablets with RSD of ∼ 3.0%.
TL;DR: Small electrolyte droplets are positioned on the sample surface and enable a spatially resolved surface analysis or modification and, therefore, no surface pretreatment is necessary.
Abstract: A new electrochemical device, the scanning droplet cell, is presented. Small electrolyte droplets are positioned on the sample surface and enable a spatially resolved surface analysis or modification. The droplet is simply held by its surface tension and, therefore, no surface pretreatment is necessary. According to the conventional 3-electrode arrangement all common potentiostatic and galvanostatic techniques, e.g. impedance spectroscopy, cyclic voltammetry, or current transients of potentiostatic steps, are possible.
TL;DR: Infrared radiation provides a wealth of information without a priori knowledge of either the spectral data or the composition of the sample and requires multivariate analysis methodologies in order to effectively mine the chemical and spatial information contained within the data.
Abstract: Established methods for imaging of biological or biomimetic samples, such as fluorescence and optical microscopy, magnetic resonance imaging (MRI), X-ray tomography or positron emission tomography (PET) are currently complemented by infrared (both near-IR and mid-IR) as well as Raman spectroscopic imaging, whether it be on a microscopic or macroscopic scale. These vibrational spectroscopic techniques provide a wealth of information without a priori knowledge of either the spectral data or the composition of the sample. Infrared radiation does not harm the organism, no electric potential needs to be applied, and the measurements are not influenced by electromagnetic fields. In addition, no extrinsic labeling or staining, which may perturb the system under investigation, has to be added. The immense volume of information contained in spectroscopic images requires multivariate analysis methodologies in order to effectively mine the chemical and spatial information contained within the data as well as to analyze a time-series of images in order to reveal the origin of a chemical or biochemical process. The promise and limitations of this new analytical tool are surveyed in this review.
TL;DR: The high detectability and rapidity of bio- and chemiluminescent detection make it suitable for the development of microarray-based high throughput screening assays, in which simultaneous, multianalyte detection is performed on multiple samples.
Abstract: Analytical chemiluminescence and bioluminescence represent a versatile, ultrasensitive tool with a wide range of applications in diverse fields such as biotechnology, pharmacology, molecular biology, clinical and environmental chemistry. Enzyme activities and enzyme substrates and inhibitors can be efficiently determined when directly involved in luminescent reactions, and also when they take part in a reaction suitable for coupling to a final light-emitting reaction. Chemiluminescence detection has been exploited in the fields of flow-injection analysis and column-liquid chromatographic and capillary-electrophoretic separative systems, due to its high sensitivity when compared with colorimetric detection. It has widely been used as an indicator of reactive oxygen species formation in cells and whole organs, thus allowing the study of a number of pathophysiological conditions related to oxidative stress. Chemiluminescence represents a sensitive and rapid alternative to radioactivity as a detection principle in immunoassays for the determination of a wide range of molecules (hormones, food additives, environmental pollutants) and in filter membrane biospecific reactions (Southern, Northern, Western, dot blot) for the determination of nucleic acids and proteins. Chemiluminescence has also been used for the sensitive and specific localization and quantitation of target analytes in tissue sections and single cells by immunohistochemistry and in situ hybridization techniques. A relatively recent application regards the use of luminescent reporter genes for the development of bioassays based on genetically engineered microorganisms or mammalian cells able to emit visible light in response to specific inorganic and organic compounds. Finally, the high detectability and rapidity of bio- and chemiluminescent detection make it suitable for the development of microarray-based high throughput screening assays, in which simultaneous, multianalyte detection is performed on multiple samples.
TL;DR: The stability of arsenic, selenium, antimony and tellurium species in water and urine as well as in extracts of fish and soil certified reference materials has been investigated and losses and species transformations during extraction processes were investigated.
Abstract: The stability of arsenic, selenium, antimony and tellurium species in water and urine (NIST SRM 2670n) as well as in extracts of fish and soil certified reference materials (DORM-2 and NIST SRM 2710) has been investigated. Stability studies were carried out with As(III), As(V), arsenobetaine, monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), phenylarsonic acid (PAA), Se(IV), Se(VI), selenomethionine, Sb(III), Sb(V) and Te(VI). Speciation analysis was performed by on-line coupling of anion exchange high-performance liquid chromatography (HPLC) with inductively coupled plasma mass spectrometry (ICP-MS). Best storage of aqueous mixtures of the examined species was achieved at 3 degrees C whereas at -20 degrees C species transformation especially of selenomethionine and Sb(V) took place and a new selenium species appeared within a period of 30 days. Losses and species transformations during extraction processes were investigated. Extraction of the spiked fish material with methanol/water led to partial conversion of Sb(III), Sb(V) and selenomethionine to two new antimony and one new selenium species. The other arsenic, selenium and tellurium species were almost quantitatively extracted. For soil spiked with MMA, PAA, Se(IV) and Sb(III), recoveries after extraction with water and sulfuric acid (0.01 mol/L) were below 20%.
TL;DR: The reliability of the ID-ICP-QMS method was demonstrated by analyzing a Canadian geological reference material and by participating in an interlaboratory study for the determination of platinum and palladium in a homogenized road dust sample.
Abstract: An isotope dilution inductively coupled plasma quadrupole mass spectrometric (ID-ICP-QMS) method was developed for the simultaneous determination of the platinum group elements Pt, Pd, Ru, and Ir in environmental samples. Spike solutions, enriched with the isotopes 194Pt, 108Pd, 99Ru, and 191Ir, were used for the isotope dilution step. Interfering elements were eliminated by chromatographic separation using an anion-exchange resin. Samples were dissolved with aqua regia in a high pressure asher. Additional dissolution of possible silicate portions by hydrofluoric acid was usually not necessary. Detection limits of 0.15 ng g–1, 0.075 ng g–1, and 0.015 ng g–1 were achieved for Pt, Pd, Ru, and Ir, respectively, using sample weights of only 0.2 g. The reliability of the ID-ICP-QMS method was demonstrated by analyzing a Canadian geological reference material and by participating in an interlaboratory study for the determination of platinum and palladium in a homogenized road dust sample. Surface soil, sampled at different distances from a highway, showed concentrations in the range of 0.1–87 ng g–1. An exponential decrease of the platinum and palladium concentration with increasing distance and a small anthropogenic contribution to the natural background concentration of ruthenium and iridium was found in these samples.
TL;DR: In this article, the authors used an ion exchange and anion exchange liquid chromatography (ICP-MS) for the separation of 13 different arsenic species in body fluids (arsenite, arsenate, dimethylarsinic acid (DMAA), monomethylarsonic acid (MMAA), trimethylarsine oxide (TMAO), tetramethylarsonium ion (TMT), arsenobetaine (AsB), arsenocholine (AsC), dimethylaroyl ethanol (DMAE) and four common Dimethylarsin
Abstract: Cation exchange and anion exchange liquid chromatography were coupled to an ICP-MS and optimised for the separation of 13 different arsenic species in body fluids (arsenite, arsenate, dimethylarsinic acid (DMAA), monomethylarsonic acid (MMAA), trimethylarsine oxide (TMAO), tetramethylarsonium ion (TMA), arsenobetaine (AsB), arsenocholine (AsC), dimethylarsinoyl ethanol (DMAE) and four common dimethylarsinoylribosides (arsenosugars). The arsenic species were determined in seaweed extracts and in the urine and blood serum of seaweed-eating sheep from Northern Scotland. The sheep eat 2–4 kg of seaweed daily which is washed ashore on the most northern Island of Orkney. The urine, blood and wool of 20 North Ronaldsay sheep and kidney, liver and muscle from 11 sheep were sampled and analysed for their arsenic species. In addition five Dorset Finn sheep, which lived entirely on grass, were used as a control group. The sheep have a body burden of approximately 45–90 mg arsenic daily. Since the metabolism of arsenic species varies with the arsenite and arsenate being the most toxic, and organoarsenic compounds such as arsenobetaine the least toxic compounds, the determination of the arsenic species in the diet and their body fluids are important. The major arsenic species in their diet are arsenoribosides. The major metabolite excreted into urine and blood is DMAA (95 ± 4.1%) with minor amounts of MMAA, riboside X, TMA and an unidentified species. The occurrence of MMAA is assumed to be a precursor of the exposure to inorganic arsenic, since demethylation of dimethylated or trimethylated organoarsenic compounds is not known (max. MMAA concentration 259 μg/L). The concentrations in the urine (3179 ± 2667 μg/L) and blood (44 ± 19 μg/kg) are at least two orders of magnitude higher than the level of arsenic in the urine of the control sheep or literature levels of blood for the unexposed sheep. The tissue samples (liver: 292 ± 99 μg/kg, kidney: 565 ± 193 μg/kg, muscle: 680 ± 224 μg/kg) and wool samples (10 470 ± 5690 μg/kg) show elevated levels which are also 100 times higher than the levels for the unexposed sheep.
TL;DR: A critical review of off-line and on-line coupling of matrix-assisted laser desorption/ ionization (MALDI) mass spectrometry to liquid column separations and planar separations is presented.
Abstract: This paper presents a critical review of off-line and on-line coupling of matrix-assisted laser desorption/ionization (MALDI) mass spectrometry to liquid column separations (e.g. HPLC, GPC and CE) and planar separations (e.g. PAGE and TLC). Off-line MALDI analysis of fractions collected from HPLC, GPC and CE or spots scraped and extracted from TLC and PAGE has already become a routine practice for many laboratories. MALDI has also been used to obtain mass spectra directly from TLC plates and PAGE. The direct analysis methods range from dot-blotted samples to two-dimensional scanning of the entire gels/plates. Various combinations of on-line coupling of MALDI with column separations are also reviewed. The review discusses the strengths and limitations associated with different off-line and on-line coupling approaches.
TL;DR: The results show that the mobilization of arsenic depended on the pH value of the extraction solution and the kind of extracted soil, and the highest amount of extracted arsenic was found at the highest pH.
Abstract: A method to separate and quantify two inorganic arsenic species As(III) and As(V) and two organic arsenic species, monomethylarsonic acid (MMA) and dimethylarsinic acid (DMA), by HPLC-ICP/MS has been developed. The separation of arsenic species was achieved on the anionic exchange column IonPac®AS11 (Dionex) with NaOH as mobile phase. The technique was successfully applied to analyze extracts of two contaminated soils, sampled at a former tannery site (soil 1) and a former paint production site (soil 2). The soils were extracted at pH values similar to the natural environment. Extractions were performed at different pH values with 0.3 M ammonium oxalate (pH = 3), milli-Q water (pH = 5.8), 0.3 M sodium carbonate (pH = 8) and 0.3 M sodium bicarbonate (pH = 11). No organically bound arsenic was found in the extracts. As(V) was the major component. Only up to 0.04% of the total arsenic contained in soil 1 were mobilized. The highest amount of extracted arsenic was found at the highest pH. In the milli-Q water extract of soil 1 As(III) and As(V) were found. High amounts of As(V) were found in the extracts of soil 2. Up to 20% of the total arsenic bound to soil 2 constituents were released. The results show that the mobilization of arsenic depended on the pH value of the extraction solution and the kind of extracted soil. Dramatic consequences have to be expected for pH changes in the environment especially in cases where soils contain high amounts of mobile arsenic.
TL;DR: In this article, a simple flame atomic absorption spectrometric (FAAS) procedure for the determination of lead, bismuth, gold, palladium and cadmium impurities in Raney nickel and nickel oxide was developed using a preconcentration step on an Amberlite XAD-16 resin packed column.
Abstract: A simple flame atomic absorption spectrometric (FAAS) procedure for the determination of lead, bismuth, gold, palladium and cadmium as impurities in Raney nickel and nickel oxide was developed using a preconcentration step on an Amberlite XAD-16 resin packed column. Lead, bismuth, gold, palladium and cadmium were quantitatively recovered and separated from a solution containing 1 M HCl and 0.3 M NaI by the column system. Effects of the various parameters such as reagent concentrations, sample volume, matrix effects, etc. have been investigated. Under optimized conditions, the relative standard deviation of the combined method of sample treatment, preconcentration and determination with FAAS (n = 7) is generally lower than 12%. The limit of detection (3s, n = 20) was between 10–270 ng/g. The results were used for separation and preconcentration of five trace elements from nickel matrices.
TL;DR: A methodology is described which allows accurately to determine the age of plutonium material by thermal ionisation mass spectrometry using independent parent/daughter relations and has been demonstrated for Reference Materials of known ages as well as for real samples.
Abstract: Age is a key parameter when deducing the history of plutonium material, i.e. the plutonium produced in the nuclear reactors. This is of vital importance, when a smuggled plutonium sample has been seized and the origin has to be determined. A methodology is described which allows accurately to determine the age of plutonium material by thermal ionisation mass spectrometry using independent parent/daughter relations. This has been demonstrated for Reference Materials of known ages as well as for real samples. The already established method using gamma spectrometry is compared to this.
TL;DR: Ion chromatographic separation coupled with ICP-MS was used to determine arsenic species in plant and soil extracts, and arsenic appears to be the major component in plants with good growth.
Abstract: Ion chromatographic separation coupled with ICP-MS was used to determine arsenic species in plant and soil extracts. A scheme for growth, harvesting, sample pre-treatment and analysis was developed for the arsenic species to enable determination. Preliminary results obtained with ten herb plants grown on arsenic-contaminated soil compared to non-contaminated soil show a heterogeneous pattern of accumulation rate, metabolization and detoxification mechanisms in monocots and dicots. Arsenite appears to be the major component in plants with good growth. Organic arsenic species were even detected at very low concentrations (< 150 μg kg–1 (dry mass)).
TL;DR: A good agreement between conventional coulometric and the described ion-chromatographic determination was found and quantitative recoveries of various organic Cl, Br and I containing substances of different polarity and structure were obtained.
Abstract: A method of differential AOX-analysis, i.e. the simultaneous determination of AOCl, AOBr and AOI is described. Individual steps of the method including enrichment at activated carbon, combustion in an oxygen stream and ion-chromatographic detection were optimized. In most cases quantitative recoveries of various organic Cl, Br and I containing substances of different polarity and structure were obtained. The method was applied to the determination of AOX-fractions in municipal and hospital wastewater. A good agreement between conventional coulometric and the described ion-chromatographic determination was found. High concentrations up to 130 microg/L I of organic iodine compounds were measured in the influent and effluent of a municipal treatment plant in Berlin and up to 10 mg/L I in a hospital waste-water.