Showing papers in "Separation Science and Technology in 2021"
••
TL;DR: In this paper, the statistical response surface methodology (RSM) based Box-Behnken design (BBD) was selected for evaluation of the effect of different parameters (solution pH,H2O2 con...
Abstract: In this experimental study, the statistical response surface methodology (RSM) based Box-Behnken design (BBD) was selected for evaluation of the effect of different parameters (solution pH,H2O2 con...
48 citations
••
TL;DR: In this article, the hydrometallurgical separation concepts for the heterogeneous recycling of irradiated nuclear fuel developed in Europe are presented and discussed, most of these concepts were developed within E...
Abstract: The hydrometallurgical separation concepts for the heterogeneous recycling of irradiated nuclear fuel developed in Europe are presented and discussed. Most of these concepts were developed within E...
42 citations
••
TL;DR: In recent times, carbon nanofibers (CNF) have been used extensively for the remediation of environment owing to their hollow layered organization, high specific surface area, and strong electrostat...
Abstract: In recent times, carbon nanofibers (CNF) have been used extensively for the remediation of environment owing to their hollow layered organization, high specific surface area, and strong electrostat...
38 citations
••
TL;DR: In this paper, aminoterephthalic acid (ATPA) modified oxidized activated carbon (AC) was prepared (AC@ATPA), which was applied for removal of malachite green (MG) from aqueous med...
Abstract: In this study, aminoterephthalic acid (ATPA) modified oxidized activated carbon (AC) was prepared (AC@ATPA). The (AC@ATPA) composite was applied for removal of malachite green (MG) from aqueous med...
38 citations
••
TL;DR: The presence of antibiotic molecules in the natural water sources is currently a huge problem due to the development of bacterial resistance as discussed by the authors and Graphene oxide (GO) has a large potential as a candidat...
Abstract: The presence of antibiotic molecules in the natural water sources is currently a huge problem due to the development of bacterial resistance. Graphene oxide (GO) has a large potential as a candidat...
35 citations
••
TL;DR: In this paper, a few studies on microplastics pollution were carried out in the marine environment, however, there are few studies done on MPs in the agricultural environment. But these studies were conducted in a very small scale.
Abstract: As a persistent pollutant, microplastics (MPs) have an impact on agro-ecosystems. Most studies on MPs pollution were carried out in the marine environment. However, there are few studies on MPs in ...
31 citations
••
TL;DR: Foam fractionation is a well-developed technology used to separate surface-active compounds from solution by exploiting their affinity for the air-water interface as discussed by the authors, which has since evolved into a key technology for treatment of many different pollutants from a variety of different industries such as textiles and dyes, heavy metals, proteins in food processing waste and even per-and polyfluoroalkyl substances (PFAS).
Abstract: Foam fractionation is a well-developed technology used to separate surface-active compounds from solution by exploiting their affinity for the air–water interface. The technology was founded in the 1940s and has since evolved into a key technology for treatment of many different pollutants from a variety of different industries such as textiles and dyes, heavy metals, proteins in food processing waste and even per- and poly-fluoroalkyl substances (PFAS). The technology has even progressed from a standard batch process to a continuous process with an applied reflux to being presently used as an in-situ groundwater remediation and soil remediation process. This review provides a snapshot of the historical evolution of foam fractionation, a discussion of the mechanism behind foam fractionation, the effect of key operating variables on the performance parameters, identification of the key transport processes that take place within a foam fractionation system, a review of the modeling of foam fractionation as a water treatment technology and a review of the applications of foam fractionation as a water treatment technology.
29 citations
••
TL;DR: Optimization of steviol glycosides and polyphenols extraction from stevia leaves for maceration, microwave assisted (MAE) and ultrasound assisted (UAE) techniques were performed by investigating th....
Abstract: Optimization of steviol glycosides and polyphenols extraction from stevia leaves for maceration, microwave-assisted (MAE) and ultrasound-assisted (UAE) techniques were performed by investigating th...
29 citations
••
TL;DR: In this article, cloud point extraction (CPE) process parameters were optimized for efficient separation of polyphenols, antioxidants, pectin, and organic acids in pomegranate peel.
Abstract: Pomegranate peel is a potential source of polyphenols, antioxidants, pectin, organic acids. Cloud point extraction (CPE) process parameters were optimized for efficient separation of polyphenols. M...
27 citations
••
TL;DR: In this paper, a chemical modification of chitosan was successfully carried out using 2,3-dihydroxy-benzaldehyde by a chemical condensation reaction.
Abstract: Chemical modification of chitosanwas successfully carried out using 2,3-dihydroxy-benzaldehyde by a chemical condensation reaction. Fourier transform infrared (FTIR), Scanning electron microscopy (...
26 citations
••
TL;DR: In this paper, the authors proposed that discharge of untreated wastewater from the textile industry due to the use of toxic compounds in it causes pollution in aquatic environments and major environmental and health problems.
Abstract: Drainage of untreated wastewater from the textile industry due to the use of toxic compounds in it causes pollution in aquatic environments and major environmental and health problems. Therefore, t...
••
TL;DR: In this article, CaO/Fe2O3 nanocomposite was studied as an efficient and novel adsorbent for the sorption of chromium (III) from aqueous media.
Abstract: In this study, CaO/Fe2O3 nanocomposite was studied as an efficient and novel adsorbent for the sorption of chromium (III) from aqueous media Different analyses including FTIR, XRD, TGA-DTG, SEM/ED
••
TL;DR: In this paper, the photo-degradation of Methylene Blue (MB), Reactive Black 5 (RB), and Acid Blue 80 (AB) dyes were investigated.
Abstract: Characterization and test a magnetic graphene oxide (GO) nanocomposite (Fe3O4-GO) in the photo-degradation of Methylene Blue (MB), Reactive Black 5 (RB), and Acid Blue 80 (AB) dyes were inv...
••
TL;DR: In this article, the liquid-liquid extraction process is numerically studied based on two modeling approaches of artificial neural network (ANN) and response surface methodology (RSM), and four influential parameters a...
Abstract: The liquid-liquid extraction process is numerically studied based on two modeling approaches of artificial neural network (ANN) and response surface methodology (RSM). Four influential parameters a...
••
TL;DR: Arsenite removal by aerated iron electrocoagulation process was investigated in this paper, where the experiments were executed in a 5L capacity rectangular tank equipped with 14 generators and 14 generators.
Abstract: Arsenite removal by aerated iron electrocoagulation process was investigated in this present study. Electrocoagulation experiments were executed in a 5L capacity rectangular tank equipped with 14 i...
••
TL;DR: In this article, the biosorption of methylene blue (MB) dye using the wild macrofungus (Lactarius piperatus) (LP) was studied.
Abstract: In this study, the biosorption of methylene blue (MB) dye using the wild macrofungus (Lactarius piperatus) (LP) was studied. To determine the optimum conditions, the effects of contact time, initia...
••
TL;DR: In this article, the electrocoagulation process using hybrid aluminum-iron electrode was used for the removal of arsenic and fluoride from water, the operation parameters; current density, initial pH, treatment tim...
Abstract: The electrocoagulation process using hybrid aluminum-iron electrode was used for the removal of arsenic and fluoride from water. The operation parameters; current density, initial pH, treatment tim...
••
TL;DR: In this paper, a 2-hydroxyterephthalic acid modified hypercrosslinked polymer (2-HTA-HCP) was successfully used for removal of pollutants from wastewater.
Abstract: Adsorption is an effective strategy for the removal of pollutants from the wastewater. Herein, a 2-hydroxyterephthalic acid (2-HTA) modified hypercrosslinked polymer (2-HTA-HCP) is successfully syn...
••
TL;DR: A macroporous copolymer of styrene and divinylbenzene resin (TVEX-PHOR) was examined for adsorption of terbium (III) and gadolinium(III) from nitrate medium as mentioned in this paper.
Abstract: A macroporous copolymer of styrene and divinylbenzene resin (TVEX-PHOR) was examined for adsorption of terbium(III) and gadolinium(III) from nitrate medium. Characterization of TVEX-PHOR before and...
••
TL;DR: In this paper, the coagulation-flocculation process was optimized for the clarification of leachate from the Technical Center of Souk-Ahras city in Egypt.
Abstract: The aim of this study was to optimize the operational conditions of the coagulation-flocculation process for the clarification of leachate from the landfill Technical Center of Souk-Ahras city. Thr...
••
TL;DR: The main objective of as discussed by the authors is the application of a series of Purolite commercial resins: sulfonic cationic exchanger (MTC1600H), amino phosphonic-chelating resin (MTS9500), and phosph
Abstract: The main objective of this research work is the application of a series of Purolite commercial resins: sulfonic cationic exchanger (MTC1600H), amino phosphonic-chelating resin (MTS9500), and phosph
••
TL;DR: Pulsatile crossflow has been suggested as a fouling mitigation concept for microfiltration as mentioned in this paper, but little is known about its effect on flux flux in the filtration of model suspensions.
Abstract: Pulsatile crossflow has often been suggested as a fouling mitigation concept for microfiltration. Besides beneficial effects regarding flux in the filtration of model suspensions, little is known a...
••
TL;DR: In this article, RSM and ANN were evaluated for prediction of physical and chemical properties of industrial hemp extracts prepared using MAE and the effects of liquid to solid ratio, ethanol content, extraction time, etc.
Abstract: RSM and ANN were evaluated for prediction of physical and chemical properties of industrial hemp extracts prepared using MAE. The effects of liquid to solid ratio, ethanol content, extraction time,...
••
TL;DR: In this paper, classical electrocoagulation and indirect electro-collagulation were applied to an artificial dairy effluent, by imposing a 0.2 A current intensity and varying the treatment time.
Abstract: Classical electrocoagulation and indirect electrocoagulation were applied to an artificial dairy effluent, by imposing a 0.2 A current intensity and varying the treatment time. The influence of the...
••
TL;DR: In this article, the authors investigated the biokinetic model of Botryococcus sp. in removing NH4+ and PO43- from meat processing wastewater, and the removal efficiency ranged from 89.7...
Abstract: The current study was carried out to investigate the biokinetic model of Botryococcus sp. in removing NH4+ and PO43- from meat processing wastewater. The removal efficiency of NH4+ ranged from 89.7...
••
TL;DR: The presence of ammonia in wastewater from industry activities is an important environmental issue; therefore, an adsorption process is one viable alternative process that can be used to reduce con... as mentioned in this paper.
Abstract: The presence of ammonia in wastewater from industry activities is an important environmental issue; therefore, an adsorption process is one viable alternative process that can be used to reduce con...
••
TL;DR: Magnetic max phase composite (MNPs-Ti3AlC2) was synthesized in the laboratory and used for the adsorption and recovery of hexavalent chromium from Tannery wastewater as mentioned in this paper.
Abstract: Magnetic max phase composite (MNPs- Ti3AlC2) was synthesized in the laboratory and used for the adsorption and recovery of hexavalent chromium from Tannery wastewater. Maximum adsorption of Cr (IV)...
••
TL;DR: In this paper, a hydrodynamic performance by the variation in the droplet size and distribution was also considered in the recording of experimental data for the extraction of rare-earth ions.
Abstract: A hydrodynamic performance by the variation in the droplet size and distribution was moreover considered in the recording of experimental data for the extraction of rare-earth ions. The percentage ...
••
TL;DR: In this article, the adsorptive removal of RY-18, RR-2, RB-13, and RB-171 dyes from wastewater samples using p-diethylaminomethylcalix[4]arene silica appended (DSA) resin was demonstrated.
Abstract: The current research demonstrates the adsorptive removal of RY-18, RR-2, RB-13, and RB-171 dyes from wastewater samples using p-diethylaminomethylcalix[4]arene silica appended (DSA) resin The DSA
••
TL;DR: In this article, the harvesting of Nannochloropsis oceanica was studied using magnetic separation with naked iron oxide particles, where emphasis was given to the effect of pH on harvesting efficiency.
Abstract: The harvesting of Nannochloropsis oceanica was studied using magnetic separation with naked iron oxide particles. Emphasis was given to the effect of pH on harvesting efficiency, while mixing time ...