Open AccessJournal Article
Condensation on Slippery Asymmetric Bumps
TLDR
A conceptually different design approach is presented—based on principles derived from Namib desert beetles, cacti, and pitcher plants—that synergistically combines these aspects of condensation and substantially outperforms other synthetic surfaces.Abstract:
Controlling dropwise condensation is fundamental to water-harvesting systems, desalination, thermal power generation, air conditioning, distillation towers, and numerous other applications. For any of these, it is essential to design surfaces that enable droplets to grow rapidly and to be shed as quickly as possible. However, approaches based on microscale, nanoscale or molecular-scale textures suffer from intrinsic trade-offs that make it difficult to optimize both growth and transport at once. Here we present a conceptually different design approach—based on principles derived from Namib desert beetles, cacti, and pitcher plants—that synergistically combines these aspects of condensation and substantially outperforms other synthetic surfaces. Inspired by an unconventional interpretation of the role of the beetle’s bumpy surface geometry in promoting condensation, and using theoretical modelling, we show how to maximize vapour diffusion fluxat the apex of convex millimetric bumps by optimizing the radius of curvature and cross-sectional shape. Integrating this apex geometry with a widening slope, analogous to cactus spines, directly couples facilitated droplet growth with fast directional transport, by creating a free-energy profile that drives the droplet down the slope before its growth rate can decrease. This coupling is further enhanced by a slippery, pitcher-plant-inspired nanocoating that facilitates feedback between coalescence-driven growth and capillary-driven motion on the way down. Bumps that are rationally designed to integrate these mechanisms are able to grow and transport large droplets even against gravity and overcome the effect of an unfavourable temperature gradient. We further observe an unprecedented sixfold-higher exponent of growth rate, faster onset, higher steady-state turnover rate, and a greater volume of water collected compared to other surfaces. We envision that this fundamental understanding and rational design strategy can be applied to a wide range of water-harvesting and phase-change heat-transfer applications.read more
Citations
More filters
Journal Article
Tuning Superhydrophobic Nanostructures to Enhance Jumping-Droplet Condensation
TL;DR: It is revealed that properly designed nanostructures should enable nanometric jumping droplets, which would further enhance jumping-droplet condensers for heat transfer, antifogging, and antifrosting applications.
Journal ArticleDOI
Bioinspired asymmetric amphiphilic surface for triboelectric enhanced efficient water harvesting
Song Zhang,Mingchao Chi,Jilong Mo,Tao Liu,Yanhua Liu,Qiu Fu,Jinlong Wang,Bin Luo,Ying Qin,Shuangfei Wang,Shuangxi Nie +10 more
TL;DR: In this article , an asymmetric amphiphilic surface incorporating self-driven triboelectric adsorption was developed to obtain clean water from the atmosphere, inspired by cactus spines and beetle elytra.
Journal ArticleDOI
Wetting Ridge‐Guided Directional Water Self‐Transport
TL;DR: In this paper , a lubricant-infused heterogeneous superwettability surface (LIHSS) for directional water self-transport is proposed on polyimide (PI) film through femtosecond laser direct writing and lubricant infusion.
Journal ArticleDOI
Fog Harvesting Devices Inspired from Single to Multiple Creatures: Current Progress and Future Perspective
TL;DR: The fundamental and specific mechanisms of fog harvesting involving the Namib Desert beetle, spider silk, cactus, and Nepenthes alata are described in detail, and a critical analysis of current challenges and future development is presented.
Journal ArticleDOI
A new one-step approach for the fabrication of microgrooves on Inconel 718 surface with microporous structure and nanoparticles having ultrahigh adhesion and anisotropic wettability: Laser belt processing
TL;DR: In this article , a laser belt processing method was proposed for the preparation of Inconel 718 surfaces with ultra-high adhesion and anisotropic wettability, and the results showed that the width and depth of the microgroove increased with increasing laser power and processing times, whereas the depth decreased when the processing times was increased by eight times.
References
More filters
Journal ArticleDOI
Design of an environment controlled dew tracking setup to emphasize the role of the relative humidity on breath figures dynamics
Nicolas Pionnier,Solmaz Boroomandi Barati,Elise Contraires,Rémi Berger,Matthieu Guibert,Stéphane Benayoun,Stéphane Valette +6 more
TL;DR: In this article, the influence of relative humidity on the growth rate of non-coalescing dropwise condensation has already been observed and the number of droplets to further explain the role of the RH on condensation dynamics has been analyzed.
Journal ArticleDOI
Measurement of liquid surface tension and shape of a droplet on vertical plate by far field scattering technique
TL;DR: In this article, a laser far field scattering method was used to detect droplets efficiently, and the relation between the intensity distributions of scattering and the surface tension, refractive index of the liquid droplet were derived out theoretically.
Journal Article
Tuneable fluidics within graphene nanogaps for water purification and energy storage
Zheng Bo,Yilei Tian,Zhao Jun Han,Shenghao Wu,Shuo Zhang,Jianhua Yan,Kefa Cen,Kostya Ostrikov +7 more
TL;DR: An effective, dry-climate natural plant-inspired approach to guide water into sub-micrometer graphene microwells (Sub-μGWs) and to tune the transition from the hydrophobic to superhydrophilic states is discovered.
Posted Content
Spatial control of frost formation on surfaces with millimetric serrated features
TL;DR: In this paper, the first stage of frosting is enhanced on the peaks and suppressed in the valleys when the serrated surface is exposed to humid air, causing frosting to initiate from the peak.
Posted Content
Liquid Collection on Welwitschia-Inspired Wavy Surfaces
TL;DR: In this article, a robust superhydrophilic (SHPi) surface design which is capable of enhancing both dew condensation and fog capture is presented. But it requires sophisticated wettability and microstructure patterns which suffer from high cost and low durability against severe mechanical and environmental degradations.