Open AccessJournal Article
Condensation on Slippery Asymmetric Bumps
TLDR
A conceptually different design approach is presented—based on principles derived from Namib desert beetles, cacti, and pitcher plants—that synergistically combines these aspects of condensation and substantially outperforms other synthetic surfaces.Abstract:
Controlling dropwise condensation is fundamental to water-harvesting systems, desalination, thermal power generation, air conditioning, distillation towers, and numerous other applications. For any of these, it is essential to design surfaces that enable droplets to grow rapidly and to be shed as quickly as possible. However, approaches based on microscale, nanoscale or molecular-scale textures suffer from intrinsic trade-offs that make it difficult to optimize both growth and transport at once. Here we present a conceptually different design approach—based on principles derived from Namib desert beetles, cacti, and pitcher plants—that synergistically combines these aspects of condensation and substantially outperforms other synthetic surfaces. Inspired by an unconventional interpretation of the role of the beetle’s bumpy surface geometry in promoting condensation, and using theoretical modelling, we show how to maximize vapour diffusion fluxat the apex of convex millimetric bumps by optimizing the radius of curvature and cross-sectional shape. Integrating this apex geometry with a widening slope, analogous to cactus spines, directly couples facilitated droplet growth with fast directional transport, by creating a free-energy profile that drives the droplet down the slope before its growth rate can decrease. This coupling is further enhanced by a slippery, pitcher-plant-inspired nanocoating that facilitates feedback between coalescence-driven growth and capillary-driven motion on the way down. Bumps that are rationally designed to integrate these mechanisms are able to grow and transport large droplets even against gravity and overcome the effect of an unfavourable temperature gradient. We further observe an unprecedented sixfold-higher exponent of growth rate, faster onset, higher steady-state turnover rate, and a greater volume of water collected compared to other surfaces. We envision that this fundamental understanding and rational design strategy can be applied to a wide range of water-harvesting and phase-change heat-transfer applications.read more
Citations
More filters
Journal Article
Tuning Superhydrophobic Nanostructures to Enhance Jumping-Droplet Condensation
TL;DR: It is revealed that properly designed nanostructures should enable nanometric jumping droplets, which would further enhance jumping-droplet condensers for heat transfer, antifogging, and antifrosting applications.
Journal ArticleDOI
Bioinspired asymmetric amphiphilic surface for triboelectric enhanced efficient water harvesting
Song Zhang,Mingchao Chi,Jilong Mo,Tao Liu,Yanhua Liu,Qiu Fu,Jinlong Wang,Bin Luo,Ying Qin,Shuangfei Wang,Shuangxi Nie +10 more
TL;DR: In this article , an asymmetric amphiphilic surface incorporating self-driven triboelectric adsorption was developed to obtain clean water from the atmosphere, inspired by cactus spines and beetle elytra.
Journal ArticleDOI
Wetting Ridge‐Guided Directional Water Self‐Transport
TL;DR: In this paper , a lubricant-infused heterogeneous superwettability surface (LIHSS) for directional water self-transport is proposed on polyimide (PI) film through femtosecond laser direct writing and lubricant infusion.
Journal ArticleDOI
Fog Harvesting Devices Inspired from Single to Multiple Creatures: Current Progress and Future Perspective
TL;DR: The fundamental and specific mechanisms of fog harvesting involving the Namib Desert beetle, spider silk, cactus, and Nepenthes alata are described in detail, and a critical analysis of current challenges and future development is presented.
Journal ArticleDOI
A new one-step approach for the fabrication of microgrooves on Inconel 718 surface with microporous structure and nanoparticles having ultrahigh adhesion and anisotropic wettability: Laser belt processing
TL;DR: In this article , a laser belt processing method was proposed for the preparation of Inconel 718 surfaces with ultra-high adhesion and anisotropic wettability, and the results showed that the width and depth of the microgroove increased with increasing laser power and processing times, whereas the depth decreased when the processing times was increased by eight times.
References
More filters
Journal ArticleDOI
Laser Direct Structuring of Bioinspired Spine with Backward Microbarbs and Hierarchical Microchannels for Ultrafast Water Transport and Efficient Fog Harvesting.
TL;DR: This bio-inspired SBHC exhibited the fastest water transport ability and the highest fog harvesting efficiency in comparison with spine with hierarchical channels (SHC), spine with barbs and grooves (SBG) and spine withbarbs (SB).
Journal ArticleDOI
Depletion of Lubricant from Nanostructured Oil-Infused Surfaces by Pendant Condensate Droplets.
Solomon Adera,Solomon Adera,Jack Alvarenga,Anna V. Shneidman,Cathy T. Zhang,Alana Davitt,Joanna Aizenberg,Joanna Aizenberg +7 more
TL;DR: This study characterize oil depletion caused by pendant droplets during condensation using nanostructured, chemically functionalized and lubricated horizontal copper tubes that are widely used in shell-and-tube heat exchangers in power plants and process industries.
Journal ArticleDOI
Robust platform for water harvesting and directional transport
Hu Luo,Yao Lu,Shaohui Yin,Shuai Huang,Jinlong Song,Faze Chen,Fengjun Chen,Claire J. Carmalt,Ivan P. Parkin +8 more
TL;DR: In this article, a new water harvesting platform for dropwise condensation and dropwise transportation is developed to realize both water collection and spontaneously directional transport over long-distance at low temperatures, which can directly and continuously capture moisture from the air in a low temperature environment.
Journal ArticleDOI
Exploring the Role of Habitat on the Wettability of Cicada Wings
Junho Oh,Catherine E. Dana,Sungmin Hong,Jessica K. Román,Kyoo D. Jo,Je Won Hong,Jonah Nguyen,Donald M. Cropek,Marianne Alleyne,Nenad Miljkovic,Nenad Miljkovic +10 more
TL;DR: This work elucidates the differences between inter- and intraspecies cicada wing topology, wettability, and water shedding behavior but also enables the development of rational design tools for the manufacture of artificial surfaces for energy and water applications.
Journal ArticleDOI
Controlled droplet transport to target on a high adhesion surface with multi-gradients.
TL;DR: When Laplace pressure gradient is introduced on a V-shaped wettable gradient surface, two droplets can move toward one another as designed and the droplet motion can be predicted and the movement distances can be controlled by simply adjusting the wedge angle and droplet volume.