scispace - formally typeset
Open AccessJournal ArticleDOI

Development of a deep-sea laser-induced breakdown spectrometer for in situ multi-element chemical analysis

TLDR
In this article, a deep-sea laser-induced breakdown spectrometer (ChemiCam) was deployed to perform in situ multi-element analysis of both seawater and mineral deposits at depths of over 1000m.
Abstract
Spectroscopy is emerging as a technique that can expand the envelope of modern oceanographic sensors. The selectivity of spectroscopic techniques enables a single instrument to measure multiple components of the marine environment and can form the basis for versatile tools to perform in situ geochemical analysis. We have developed a deep-sea laser-induced breakdown spectrometer (ChemiCam) and successfully deployed the instrument from a remotely operated vehicle (ROV) to perform in situ multi-element analysis of both seawater and mineral deposits at depths of over 1000 m. The instrument consists of a long-nanosecond duration pulse-laser, a spectrometer and a high-speed camera. Power supply, instrument control and signal telemetry are provided through a ROV tether. The instrument has two modes of operation. In the first mode, the laser is focused directly into seawater and spectroscopic measurements of seawater composition are performed. In the second mode, a fiber-optic cable assembly is used to make spectroscopic measurements of mineral deposits. In this mode the laser is fired through a 4 m long fiber-optic cable and is focused onto the target’s surface using an optical head and a linear stage that can be held by a ROV manipulator. In this paper, we describe the instrument and the methods developed to process its measurements. Exemplary measurements of both seawater and mineral deposits made during deployments of the device at an active hydrothermal vent field in the Okinawa trough are presented. Through integration with platforms such as underwater vehicles, drilling systems and subsea observatories, it is hoped that this technology can contribute to more efficient scientific surveys of the deep-sea environment.

read more

Citations
More filters
Journal ArticleDOI

Atomic spectrometry update – a review of advances in environmental analysis

TL;DR: The 30th annual review of the application of atomic spectrometry to the chemical analysis of environmental samples was published in 2014 as discussed by the authors, which refers to papers published approximately between August 2013 and July 2014 and continues the series of Atomic Spectrometry Updates (ASUs) in environmental analysis.
Journal Article

A first-order model for computation of laser-induced breakdown thresholds in ocular and aqueous media: Part II-Comparison to experiment

TL;DR: In this article, an analytic first-order model was developed to calculate irradiance thresholds for laser-induced breakdown in condensed media, including ocular and aqueous media, and the model has been incorporated into a computer code and code results have been compared to experimentally measured irradiance threshold for breakdown of ocular media, saline, and water by nanosecond, picosecond and femtosecond laser pulses in the visible and near-infrared.

The practical salinity scale 1978: fitting data

R.G. Perkin, +1 more
TL;DR: In this article, three equations have been fitted to new data relating the electrical conductivity of seawater to the Practical Salinity Scale 1978, for the reduction of in-situ measurements of temperature, pressure, and conductivity from anywhere in the world oceans.
Journal ArticleDOI

Quantitative methods for compensation of matrix effects and self-absorption in Laser Induced Breakdown Spectroscopy signals of solids

TL;DR: In this article, a review of methods to compensate for matrix effects and self-absorption during quantitative analysis of compositions of solids measured using LIBS and their applications to in-situ analysis is presented.
References
More filters
Journal ArticleDOI

Interspecimen Comparison of the Refractive Index of Fused Silica

TL;DR: In this paper, the index of refraction of optical quality fused silica (SiO2) was determined for 60 wavelengths from 0.21 to 3.71 μ at 20°C.
Journal ArticleDOI

An optical classification of coastal and oceanic waters based on the specific spectral absorption curves of phytoplankton pigments, dissolved organic matter, and other particulate materials1

TL;DR: Results show that, though the spectral form of absorption by pigments can be considered as more or less invariant, the absorption “efficiency” per unit C depends on the nature of the water, and hence on the type of phytoplankton population considered.
Journal ArticleDOI

New Procedure for Quantitative Elemental Analysis by Laser-Induced Plasma Spectroscopy

TL;DR: In this paper, a new procedure based on the laser-induced plasma spectroscopy (LIPS) technique was proposed for calibration-free quantitative elemental analysis of materials, which allows the matrix effects to be overcome, yielding precise and accurate quantitative results on elemental composition of materials without use of calibration curves.
Related Papers (5)