Proceedings ArticleDOI
Effect of convex curvature on the mean flow characteristics of a three-dimensional wall jet
Karan Sharma,D.V.S. Bhagavanulu +1 more
- Vol. 7375
TLDR
In this article, the authors present the results of effect of conformal curvature on the mean flow characteristics of wall jets, including mean velocity profiles, maximum velocity decay and the growth of half width.Abstract:
Several studies of jets impinging on a plane surface have already been made. This paper presents the results of effect of
convex curvature on the mean flow characteristics of wall jets. Measurements were performed up to an axial distance of
60 times the slot widths of the orifice selected in the present work. The flow properties considered in the present paper
are the mean velocity profiles, maximum velocity decay and the growth of half width. Comparisons have been made
with the two-dimensional wall jet. It is observed that the longitudinal mean velocity profiles exhibit similarity for the
convex wall jet when compare to plane wall jet. All the mean velocity profiles are self-similar at all the longitudinal
distances measured in the present study. It is shown that the decay of the maximum velocity is higher for a three-dimensional
wall jet on convex surface compare to plane wall jet. It is also found that the growth of half width is higher
on curved surface when compared to plane wall jet.read more
Citations
More filters
Journal Article
Turbulent wall jets with cylinderical streamwise surface curvature.
Journal Article
A comparative study of the influence of curvature on the boundary layers and on the inner region of wall jets
TL;DR: In this paper, the differences in the curvature effects on turbulent boundary layers and on the in-fer region of turbulent wall jets are discussed, and both convex and concave curvatures effects are con- sidered.
References
More filters
Journal ArticleDOI
The wall jet
TL;DR: In this article, the authors considered the flow due to a jet spreading out over a plane surface, either radially or in two dimensions, and obtained a similarity solution for laminar flow.
Journal ArticleDOI
The turbulent wall jet
Brian Launder,Wolfgang Rodi +1 more
TL;DR: There have been well over two hundred experimental studies published on the turbulent wall jet as mentioned in this paper, of which about one half have been prompted by heat transfer considerations and in most of these cases the flow field has been insufficiently well documented to merit close attention for the present purpose.
Journal ArticleDOI
A study of three-dimensional, incompressible turbulent wall jets
Pasquale M. Sforza,Gary Herbst +1 more
TL;DR: In this article, the mean properties of wall jet flow fields were investigated and it was shown that the maximum velocity in the flow in the near field exhibits a decay rate dependent on orifice geometry, while far downstream of the jet exit it decays at the same rate as that in a radial jet flow field.
Journal ArticleDOI
Turbulent wall jets with cylindrical streamwise surface curvature
Journal ArticleDOI
Mean and Turbulence Characteristics of a Class of Three-Dimensional Wall Jets—Part 1: Mean Flow Characteristics
TL;DR: In this article, the mean and turbulence characteristics of wall jets generated from orifices having the shapes of various segments of a circle are investigated and the influence of the geometry of the orifice on the various wall jet properties is presented and discussed.