Journal ArticleDOI
Hardfacing technologies for improvement of wear characteristics of hot working tools: A Review
Reads0
Chats0
TLDR
In this paper, a review of the application of hardfacing technology to hot working tools is presented, and the key technology and the state-of-the-art of the hardface technology related to improvement of the wear characteristics of hot tools are discussed.Abstract:
The severe operation conditions of the hot working process lead to premature failure of the hot working tools. The dominant failure of hot working tools is wear of the tool surfaces induced by the thermal softening phenomenon. Several researchers related to the service life extension technology of hot working tools paid attention to the protective overlay coating technology, so called hardfacing, for preventing premature wear of the hot working tool. This paper reviewed recent research on the application of hardfacing technology to hot working tools. In addition, the key technology and the state-of-the art of the hardfacing technology related to improvement of the wear characteristics of hot working tools were discussed. Finally, future research issues of the hardfacing technology to enhance the service life and wear characteristics of the hot working tools were described.read more
Citations
More filters
Journal ArticleDOI
Direct metal additive manufacturing processes and their sustainable applications for green technology: A review
TL;DR: In this paper, a review of the DMAM processes and their sustainable applications for green technology is presented, where the state-of-the-art and important issues related to sustainable applications of DMAM process are discussed.
Journal ArticleDOI
Directed Energy Deposition (DED) Process: State of the Art
TL;DR: Directed energy deposition (DED) is one of the promising flexible manufacturing technologies due to direct fabrication characteristics of a metallic freeform with a three-dimensional shape from computer aided design data as mentioned in this paper.
Journal ArticleDOI
Directed Energy Deposition versus Wrought Ti-6Al-4V: A Comparison of Microstructure, Fatigue Behavior, and Notch Sensitivity
Journal ArticleDOI
Investigations on quality characteristics in gas tungsten arc welding process using artificial neural network integrated with genetic algorithm
Italo Tomaz,Fernando Henrique Gruber Colaço,Shoaib Sarfraz,Danil Yu. Pimenov,Munish Kumar Gupta,Munish Kumar Gupta,Giuseppe Pintaude +6 more
TL;DR: In this paper, an Artificial Neural Network (ANN) was used to simulate the GTAW process and then combined with a genetic algorithm (GA) to determine welding parameters that can provide an optimal weld.
Journal ArticleDOI
High-temperature abrasive wear characteristics of H13 steel modified by laser remelting and cladded with Stellite 6 and Stellite 6/30% WC
TL;DR: In this article, a comparative study of the high-temperature abrasive wear of H13 steel surfaces modified by laser melting and cladding with Stellite 6 and 30% WC was performed.
References
More filters
Journal ArticleDOI
The machinability of nickel-based alloys: a review
TL;DR: A detailed review of the various types of nickel-based alloys available on a commercial basis and their development including alloying additions as well as processing techniques employed to achieve specific mechanical and/or chemical properties is presented in this article.
Journal ArticleDOI
Temperature and wear of cutting tools in high-speed machining of Inconel 718 and Ti6Al6V2Sn
TL;DR: In this article, the authors investigated the thermal properties of high-speed machining of Inconel 718 and Ti 6Al 6V 2Sn alloys from a thermal point of view.
Journal ArticleDOI
High-temperature sliding wear of metals
TL;DR: In this paper, the authors reviewed the main findings of extensive research programs into the development of wear-protective layers, including a model that accounts closely for the observed effects of temperature on wear rates during like-on-like sliding, and showed that at low temperatures, the layers generally consist of loosely-compacted particles; at higher temperatures, there is an increase in the rates of generation and retention of particles while compaction, sintering and oxidation of the particles in the layers are facilitated.
BookDOI
Metallurgical and ceramic protective coatings
TL;DR: In this article, the authors present a survey of sol-gel derived ceramic films: fundamentals and applications, as well as their application in the following: Electroplating of refractory metals from molten salts.