scispace - formally typeset
Journal ArticleDOI

Hydration heat of slag or fly ash in the composite binder at different temperatures

Reads0
Chats0
TLDR
In this article, the authors investigated the hydration heat of slag or fly ash in the composite binder at 25°C, 45°C and 60°C in order to determine the effect of elevated temperature on the reaction of slags and fly ash.
About
This article is published in Thermochimica Acta.The article was published on 2017-09-10. It has received 75 citations till now. The article focuses on the topics: Fly ash & Slag.

read more

Citations
More filters
Journal ArticleDOI

Solidification/stabilization of lead-zinc smelting slag in composite based geopolymer

TL;DR: In this paper, a composite based geopolymer (Pulverized Fuel Ash (PFA) and Blast Furnace Slag (BFS)) was used to solidify lead-zinc smelting slag (LZSS).
Journal ArticleDOI

Performance comparison of cement replacing materials in concrete: Limestone fillers and supplementary cementing materials – A review

TL;DR: In this article, the authors provide a comprehensive review on the properties and performance of supplementary cementing materials (SCMs) as a substitute for conventional Portland Cement concrete, including early age hydration, mechanical properties, permeability, durability and environmental impacts.
Journal ArticleDOI

Activation of Portland cement blended with high volume of fly ash using Na2SO4

TL;DR: In this paper, the effect of sodium sulphate (Na2SO4) on the activation of Portland cement blended with 50wt-% class F fly ash was studied and the results indicated that mortar workability was improved.
Journal ArticleDOI

Carbonation curing of cement mortars incorporating carbonated fly ash for performance improvement and CO2 sequestration

TL;DR: In this paper, the authors investigated the performance of cement mortar incorporating carbonated fly ash (FA) and the synergistic effect with carbonation curing and showed that the content of free CaO and the hydration heat were reduced apparently by carbonation treatment.
Journal ArticleDOI

Comparing the pozzolanic activity properties of obsidian to those of fly ash and blast furnace slag

TL;DR: The use of pozzolanic materials in cement provides economic advantages and improves the physico-mechanical properties of cement as mentioned in this paper, which is a pozzolana in cement.
References
More filters
Journal ArticleDOI

Supplementary cementitious materials

TL;DR: The use of silica-rich SCMs influences the amount and kind of hydrates formed and thus the volume, the porosity and finally the durability of these materials.
Book

Structure and Performance of Cements

Paul Barnes, +1 more
TL;DR: The use of Synchroton sources in the study of Cement Materials as discussed by the authors has been shown to be useful in the analysis of Cements and their applications in many applications.
Journal ArticleDOI

Recent advances in understanding the role of supplementary cementitious materials in concrete

TL;DR: A review of the advances in knowledge provided by research in these areas can be found in this paper, emphasizing the impact of the research on the field and emphasizing the benefits of these advances.
Journal ArticleDOI

Hydration of Portland cement with high replacement by siliceous fly ash

TL;DR: In this article, the effects of fly ash on the hydration of ordinary Portland cement pastes were investigated over a hydration time of 550 days and the results were compared with a reference blend of OPC containing 50% of inert quartz powder allowing the distinction between "filler effect" and pozzolanic reaction.
Journal ArticleDOI

Methods for determination of degree of reaction of slag in blended cement pastes

TL;DR: In this article, the degree of reaction of slag in blended pastes is measured using a combination of Selective dissolution and differential scanning calorimetry, but the absolute heat of hydration or contribution to chemical shrinkage of any particular slag is not known.
Related Papers (5)