Journal ArticleDOI
Preparation of Al-Cu-Fe thin films by vapor deposition technique from a single source
Reads0
Chats0
TLDR
In this paper, the formation of stable icosahedral Al-Cu-Fe quasicrystalline thin films by thermal vapor deposition techniques (indirect heating and e-beam heating) from a single source was reported.About:
This article is published in Materials Research Bulletin.The article was published on 2002-02-01. It has received 17 citations till now. The article focuses on the topics: Thin film & Deposition (phase transition).read more
Citations
More filters
Journal ArticleDOI
Preparation and characterisation of melt-spun Al–Cu–Fe quasicrystals
TL;DR: In this article, three Al-Cu-Fe alloys with compositions of Al60-65Cu20-27.5Fe12.5-15 were prepared by conventional casting and further processed by melt-spinning, and the structures formed were examined to get an insight into the interrelated effects of synthesis, processing and microstructure of alloys.
Journal ArticleDOI
Microstructural characterisation of thermally sprayed quasicrystalline Al–Co–Fe–Cr coatings
TL;DR: In this article, a microstructural analysis was carried out for AlCo-Fe-Cr feed powder and the coatings sprayed with a high velocity oxy-fuel method using different operation conditions.
Journal ArticleDOI
Deposition and characterisation of Al–Cu–Fe thin films
TL;DR: In this article, multilayer thin films Al/Cu/Fe were deposited in different sequences by sputtering in a triode system and after the deposition the samples were annealed in an inert atmosphere at temperatures up to 600 °C in order to obtain a homogeneous film with the desirable composition Al 62 Cu 25 Fe 13.
Journal ArticleDOI
Microstructural evolution in Al–Cu–Fe quasicrystalline thin films
E. J. Widjaja,Laurence D. Marks +1 more
TL;DR: In this article, the authors performed transmission electron microscopy (TEM) to study the microstructural evolution in Al-Cu-Fe quasicrystalline thin films.
Journal ArticleDOI
Modification of copper surfaces with cathodic arc aluminum plasma
Beril Çorlu,Mustafa Ürgen +1 more
TL;DR: In this paper, surfaces of copper substrates were modified with aluminum plasma using cathodic vacuum arc (CVA) physical vapor deposition based technique, and the effect of long and short durations of ion bombardment on the resulting microstructural features of the treated surfaces were studied and discussed.
References
More filters
Journal ArticleDOI
Electrical Resistivity of Thin Film Samples of Al-Cu-Fe Icosahedral Quasicrystal
TL;DR: In this paper, a film sample of icosahedral Al-Cu-Fe alloy was further thinned by ion milling, and the electrical resistivity was measured for the thinned samples.
Journal ArticleDOI
Conduction Mechanisms in Some Icosahedral and Amorphous Phases
TL;DR: In this paper, a quasi-perfect icosahedral Al-Pd-Re bulk sample was used to investigate the temperature dependence of conductance and thermopower, in the range between 10 and 300 K.
Related Papers (5)
Fabrication by magnetron sputtering of Al-Cu-Fe quasicrystalline films for tribological applications
Investigation on diffusion barrier properties of reactive sputter deposited TiAlxNyOz thin films for Cu metallization
H. C. Kim,Terry Alford +1 more