Journal ArticleDOI
Soft FerritesߞProperties and Applications
Reads0
Chats0
TLDR
In this paper, the authors discuss the properties and applications of soft and hard ferrites and their applications in search-works, including the application of soft ferrite material from emc to rfid.Abstract:
soft ferrites 1988 inductor sintering scribd, ferrites reference module in materials science and, soft ferrites properties and applications pe1abr, applications soft ferrites philips inductor transformer, soft ferrites properties and applications by e c snelling, soft ferrite materials amp components mmg canada ltd, soft ferrites properties and applications amazon co uk, soft ferrites properties and applications book 2005, soft ferrites and accessories ferroxcube ferroxcube, the international magnetics association, soft ferrites properties and applications eric charles, soft ferrites properties and applications e c snelling, soft ferrites second edition properties and applications, general properties and applications of ferrites, application of soft ferrite material from emc to rfid, soft ferrites properties and applications google books, can anyone tell me about soft and hard ferrites and the, soft ferrites and accessories farnell element14, soft ferrites properties and applications in searchworks, soft ferrites properties and applications nemeco de, soft ferrites specialty ferrites ferroxcube, material processing technology for soft ferrites manufacturing, soft ferrites introduction ferroxcube, soft ferrites abebooks, ferrite magnet wikipedia, history of ferrite fair rite, ferrites their properties and applications sciencedirect, chapterread more
Citations
More filters
Dissertation
Contribution a l'integration des composants passifs d'une alimentation a decoupage
TL;DR: In this article, travaux de modelisation des composants passifs, developpes au LEG, ont permis de caracteriser la structure LCT en prenant en compte tous les aspects utiles de son comportement.
Journal ArticleDOI
Effect of Sintering Temperature on Structural, Electrical and Dielectric Parameters of Mn-Zn Nano Ferrites
Humaira Anwar,Ashari Maqsood +1 more
TL;DR: In this article, the effect of sintering temperature on the crystalline phase formation and dielectric properties were investigated by X-ray diffraction and impedance analyzer respectively.
Journal ArticleDOI
Multiscale modeling of heterogeneous magnetic materials
TL;DR: In this article, the authors analyzed and discussed some computational methods for the simulation of the electric and magnetic behavior versus frequency of heterogeneous soft magnetic materials such as soft magnetic composites, soft ferrites, and polymer composites.
Journal ArticleDOI
Selective Extraction of Iron(III) from Aqueous Nitrate Solution in the Presence of Cobalt(II), Copper(II) and Nickel(II) Ions Using Bis(Δ2-2-imidazolinyl)-5,5′-dioxime
TL;DR: The feasibility of using bis(delta2-2-imidazolinyl)-5,5'-dioxime (H2L) for the selective extraction of iron(III) from aqueous solutions was investigated by employing an solvent-extraction technique and the extraction was found to significantly depend on the aqueously solution pH.
Journal ArticleDOI
Improved Properties of Li-Mn-Ti Ferrites by Microwave Sintering
TL;DR: Substituted Li-ferrites are attractive materials for research due to their important properties like high Curie temperature leading to high thermal stability, high and wide range of saturation magnitudes.
References
More filters
Journal ArticleDOI
Computationally efficient winding loss calculation with multiple windings, arbitrary waveforms, and two-dimensional or three-dimensional field geometry
TL;DR: The squared-field-derivative method for calculating eddy-current (proximity effect) losses in round-wire or litz-wire transformer and inductor windings is derived in this paper.
Journal ArticleDOI
Cost-constrained selection of strand diameter and number in a litz-wire transformer winding
TL;DR: In this article, the relationship between wire size, normalized cost, and normalized loss is shown to have a general form that applies to a wide range of designs, and a practical design procedure is provided, applied to an example design, it leads to less than half the original loss at lower than the original cost, or, alternatively, under one fifth the original costs with the same loss as the original design.
Journal ArticleDOI
Experimental determination of stray capacitances in high frequency transformers
TL;DR: In this paper, the two-port network approach and the step-response approach are used for determining stray capacitances in a two-winding high frequency transformer for circuit simulation and computeraided design purposes.
Journal ArticleDOI
Measurements and performance factor comparisons of magnetic materials at high frequency
TL;DR: In this paper, the design of power magnetic components for operation at high frequency (HF, 3-30 MHz) has been hindered by a lack of magnetic material performance data and by the limited design theory in that frequency range.
Proceedings ArticleDOI
Core losses under DC bias condition based on Steinmetz parameters
TL;DR: In this paper, the Steinmetz premagnetization graph (SPG) is introduced to calculate core losses under DC bias conditions, and a detailed description of the test system is given, as high accuracy is crucial.