scispace - formally typeset
Journal ArticleDOI

Stable and metastable phase equilibria in the chemical interaction between aluminium and silicon carbide

J. C. Viala, +2 more
- 01 Mar 1990 - 
- Vol. 25, Iss: 3, pp 1842-1850
TLDR
In this paper, an experimental investigation was carried out on the Al-C-Si ternary system under atmospheric pressure and at temperatures up to 1900 K. From the results obtained, a thermodynamic model based on stable and metastable phase equilibria was set up in order to provide a general description of the chemical interaction between aluminium and SiC.
Abstract
An experimental investigation was carried out on the Al-C-Si ternary system under atmospheric pressure and at temperatures up to 1900 K. From the results obtained, a thermodynamic model based on stable and metastable phase equilibria in the Al-C-Si ternary system was set up in order to provide a general description of the chemical interaction between aluminium and SiC. According to this model, aluminium and SiC are in thermodynamic equilibrium at every temperature lower than 923 K. At 923±3 K, i.e. at 10 K below the melting point of pure aluminium, a quasiperitectic invariant transformation occurs in the Al-C-Si system. In this transformation, solid aluminium reacts with SiC to give Al4C3 and a ternary (Al-C-Si) liquid phase. The carbon content of this liquid phase is very low; its silicon content is 1.5±0.4 at%. From 923 to about 1620 K, aluminium partially reacts with an excess of SiC, leading to a metastable monovariant equilibrium involving SiC, Al4C3 and an aluminium-rich (Al-C-Si) ternary liquid phase, L. The carbon content of this liquid phase, L, remains very low whereas its silicon content increases with temperature from 1.5±0.4 at% at 923 K to 16.5±1 at% at 1620 K. In the temperature range 1670 to 1900 K, two other three-phased monovariant equilibria can be reached by reacting aluminium and SiC. These equilibria involve on the one hand SiC, Al4SiC4 and a liquid phase, L′, and on the other hand, Al4SiC4, Al4C3 and a liquid phase, L″. The former is a stable equilibrium, the latter is a metastable one. At temperatures higher than about 2200 K, the latter metastable equilibrium is replaced by two monovariant stable phase equilibria including the ternary carbide Al8SiC7.

read more

Citations
More filters
Journal ArticleDOI

Chemical reactivity of aluminium with boron carbide

TL;DR: In this paper, the chemical reactivity of boron carbide (B4C) with metallic aluminium (Al) was studied at temperatures ranging from 900 to 1273 K (627-1000 °C).
Journal ArticleDOI

Thermodynamic calculation of the ternary system Al-Si-C

TL;DR: In this article, the phase diagram of the ternary system Al-C-Si was optimised using experimental data from the literature and the Si-C system was also optimized using the least square method.
Journal ArticleDOI

The influence of silicon carbide reinforcement on the pitting behaviour of aluminium

TL;DR: In this paper, the pitting susceptibility of metal matrix composites based on aluminium (1050) reinforced with particulate silicon carbide has been examined using polarization in neutral 1N NaCl solution at 25 °C.
Journal ArticleDOI

Prediction of Si contents to suppress the formation of Al4C3 in the SiCp/Al composite

TL;DR: In this article, the authors used SEM, DSC, AES, and XRD combined techniques in elucidating detailed interfacial phenomena in the SiC p /Al composite and showed that there exists a transition temperature at which a sudden increase in equilibrium Si contents required to prevent Al 4 C 3 formation occurs.
Journal ArticleDOI

Review Durability of materials in molten aluminum alloys

TL;DR: The durability of metals and ceramics in molten aluminum is a great concern in engineering applications such as die casting, containment of liquid metals, and semi-solid processing as discussed by the authors.
References
More filters
Journal ArticleDOI

The wetting of solids by molten metals and its relation to the preparation of metal-matrix composites composites

TL;DR: In this paper, a review of the literature concerning the preparation of metal-matrix composites by liquid metal infiltration techniques is presented, with particular emphasis on reinforcements made of graphite, alumina or silicon carbide multifilament fibres.
Journal ArticleDOI

Interfacial reactions between SiC and aluminium during joining

TL;DR: In this article, the reaction between SiC and liquid aluminium was studied using transmission electron microscopy (TEM) and X-ray powder diffraction and it was confirmed that Al4C3 and silicon were formed, and that the extent of reaction between silicon and aluminium was decreased by the addition of silicon into aluminium.
Journal ArticleDOI

Wettability of SiC by aluminium and Al-Si alloys

TL;DR: In this article, the variations with time of the contact angle formed by molten pure aluminium or Al-Si alloys with single crystalline SiC were measured by the sessile drop method in a vacuum of 10−4 to 10−5 Pa at temperatures ranging from 933 to 1200 K.
Journal ArticleDOI

Microstructural aspects of aluminium-silicon carbide particulate composites produced by a casting method

TL;DR: In this article, the microstructure of SiC-reinforced aluminium alloys produced by this method are considered and it is shown that the SiC stability in the melt is dependent on the matrix alloy involved and that only alloys with high silicon contents have a low reactivity with this reinforcement.
Journal ArticleDOI

Phase equilibria in the Al-Si-C system

TL;DR: In this paper, an internal sealed liquidus crucibles were used to determine the solubility of C in Al and Si in the range 1700° to 2150°C and isothermal sections for the ternary system at 2000° and 2150 °C.
Related Papers (5)