Open AccessBook
Surface Acoustic Wave Devices for Mobile and Wireless Communications
TLDR
In this paper, the authors present a comparison of SAW filter design for Arbitrary Amplitude/Phase Response (AQR) and second-order effects in SAW filters.Abstract:
Fundamentals of Surface Acoustic Waves and Devices: Introduction. Basics of Piezoelectricity and Acoustic Waves. Principles of Linear Phase SAW Filter Design. Equivalent Circuit and Analytic Models for a SAW Filter. SomeMatching and Trade-Off Concepts for SAW Filter Design. Compensation for Second-Order Effects in SAW Filters. Designing SAW Filters for Arbitrary Amplitude/Phase Response. Interdigital Transducers with Chirped or Slanted Fingers. IDT Finger Reflections andRadiation Conductance. Techniques, Devices and Mobile/Wireless Applications: Overview of Systems and Devices. SAW Reflection Gratings and Resonators. Single-Phase Unidirectional Transducers for Low-Loss Filters. RF and Antenna-Duplexer Filters forMobile/Wireless Transceivers. Other RF Front-end and Inter-stage Filters for Mobile/Wireless Transceivers. SAW IF Filters for Mobile Phones and Pagers. Fixed-Code SAW IDTs for Spread-Spectrum Communications. Real-Time SAW Convolvers for Voice and Data Spread-Spectrum Communications. Surface Wave Oscillators and Frequency Synthesizers. SAW Filters for Digital Microwave Radio, Fiber Optic, and Satellite Systems. Postscript. Subject Index.read more
Citations
More filters
Journal ArticleDOI
Application of ZnO nanorods synthesized on 64° Y-cut LiNbO3 to surface acoustic wave ultraviolet photodetector
Walter Water,Ren-Yang Jhao +1 more
TL;DR: In this article, a ZnO sensing layer with nanorod arrays grown on a 64° Y-cut LiNbO 3 substrate was used to fabricate a surface acoustic wave ultraviolet photodetector.
Journal ArticleDOI
Effective and rapid technique for temporal response modeling of surface acoustic wave interdigital transducers.
TL;DR: Simulation tool based on Spatial Impulse Response model based on effective and rapid technique for SAW‐IDT modeling is developed and results obtained show a good concordance and confirm effectiveness of suggested method.
Proceedings ArticleDOI
Actuators Using Piezoelectric Stacks and Displacement Enhancers
Yoseph Bar-Cohen,Stewart Sherrit,Xiaoqi Bao,Mircea Badescu,Hyeong Jae Lee,Phillip Walkenmeyer,Shyh-Shiuh Lih +6 more
TL;DR: The actuators/motors that have been developed and reviewed in this paper are operated by various horn configurations as well as the use of pre-stress flexures that make them thermally stable and increases their coupling efficiency.
Journal ArticleDOI
Magnetoelastic surface acoustic wave attenuation and anisotropic magnetoresistance in Ni3Fe thin films
TL;DR: In this paper, the vector magnetic field, H, dependencies of 0.6 GHz magnetoelastic Rayleigh-mode surface acoustic wave attenuation, A(H), and dc magnetoresistance of polycrystalline Ni3Fe thin films with thicknesses ranging from 5.3 nm to 179.1 nm were measured and correlated with the samples' uniaxial anisotropy fields, HK.
Journal ArticleDOI
Parylene-C microfibrous thin films as phononic crystals
TL;DR: In this paper, the authors determined the bandgaps of Parylene-C microfibrous thin films (muFTFs) by treating them as phononic crystals comprising identical micro-fibers arranged either on a square or a hexagonal lattice.