Showing papers by "Adolfo Comerón published in 2014"

EARLINET: towards an advanced sustainable European aerosol lidar network

Abstract: The European Aerosol Research Lidar Network, EARLINET, was founded in 2000 as a research project for establishing a quantitative, comprehensive, and statistically significant database for the horizontal, vertical, and tempo- ral distribution of aerosols on a continental scale. Since then EARLINET has continued to provide the most extensive col- lection of ground-based data for the aerosol vertical distribu- tion over Europe. This paper gives an overview of the network's main de- velopments since 2000 and introduces the dedicated EAR- LINET special issue, which reports on the present innova- tive and comprehensive technical solutions and scientific re- sults related to the use of advanced lidar remote sensing tech- niques for the study of aerosol properties as developed within the network in the last 13 years. Since 2000, EARLINET has developed greatly in terms of number of stations and spatial distribution: from 17 sta- tions in 10 countries in 2000 to 27 stations in 16 countries in 2013. EARLINET has developed greatly also in terms of technological advances with the spread of advanced multi- wavelength Raman lidar stations in Europe. The develop- ments for the quality assurance strategy, the optimization of instruments and data processing, and the dissemination of data have contributed to a significant improvement of the net- work towards a more sustainable observing system, with an increase in the observing capability and a reduction of oper- ational costs. Consequently, EARLINET data have already been ex- tensively used for many climatological studies, long-range transport events, Saharan dust outbreaks, plumes from vol- canic eruptions, and for model evaluation and satellite data validation and integration. Future plans are aimed at continuous measurements and near-real-time data delivery in close cooperation with other ground-based networks, such as in the ACTRIS (Aerosols, Clouds, and Trace gases Research InfraStructure Network) www.actris.net, and with the modeling and satellite commu- nity, linking the research community with the operational world, with the aim of establishing of the atmospheric part of the European component of the integrated global observ- ing system.

Estimation of mineral dust long-wave radiative forcing: sensitivity study to particle properties and application to real cases in the region of Barcelona

Abstract: . The aerosol radiative effect in the long-wave (LW) spectral range is sometimes not taken into account in atmospheric aerosol forcing studies at local scale because the LW aerosol effect is assumed to be negligible. At regional and global scale this effect is partially taken into account: aerosol absorption is taken into account but scattering is still neglected. However, aerosols with strong absorbing and scattering properties in the LW region, like mineral dust, can have a non-negligible radiative effect in the LW spectral range (both at surface and top of the atmosphere) which can counteract their cooling effect occurring in the short-wave spectral range. The first objective of this research is to perform a sensitivity study of mineral dust LW radiative forcing (RF) as a function of dust microphysical and optical properties using an accurate radiative transfer model which can compute vertically resolved short-wave and long-wave aerosol RF. Radiative forcing simulations in the LW range have shown an important sensitivity to the following parameters: aerosol load, radius of the coarse mode, refractive index, aerosol vertical distribution, surface temperature and surface albedo. The scattering effect has been estimated to contribute to the LW RF up to 18% at the surface and up to 38% at the top of the atmosphere. The second objective is the estimation of the short-wave and long-wave dust RF for 11 dust outbreaks observed in Barcelona. At the surface, the LW RF varies between +2.8 and +10.2 W m−2, which represents between 11 and 26% (with opposite sign) of the SW component, while at the top of the atmosphere the LW RF varies between +0.6 and +5.8 W m−2, which represents between 6 and 26% (with opposite sign) of the SW component.

Assimilation of lidar signals: application to aerosol forecasting in the western Mediterranean basin

Abstract: . This paper presents a new application of assimilating lidar signals to aerosol forecasting. It aims at investigating the impact of a ground-based lidar network on the analysis and short-term forecasts of aerosols through a case study in the Mediterranean basin. To do so, we employ a data assimilation (DA) algorithm based on the optimal interpolation method developed in the Polair3D chemistry transport model (CTM) of the Polyphemus air quality modelling platform. We assimilate hourly averaged normalised range-corrected lidar signals (PR2) retrieved from a 72 h period of intensive and continuous measurements performed in July 2012 by ground-based lidar systems of the European Aerosol Research Lidar Network (EARLINET) integrated into the Aerosols, Clouds, and Trace gases Research InfraStructure (ACTRIS) network and an additional system in Corsica deployed in the framework of the pre-ChArMEx (Chemistry-Aerosol Mediterranean Experiment)/TRAQA (TRAnsport a longue distance et Qualite de l'Air) campaign. This lidar campaign was dedicated to demonstrating the potential operationality of a research network like EARLINET and the potential usefulness of assimilation of lidar signals to aerosol forecasts. Particles with an aerodynamic diameter lower than 2.5 μm (PM2.5) and those with an aerodynamic diameter higher than 2.5 μm but lower than 10 μm (PM10–2.5) are analysed separately using the lidar observations at each DA step. First, we study the spatial and temporal influences of the assimilation of lidar signals on aerosol forecasting. We conduct sensitivity studies on algorithmic parameters, e.g. the horizontal correlation length (Lh) used in the background error covariance matrix (50 km, 100 km or 200 km), the altitudes at which DA is performed (0.75–3.5 km, 1.0–3.5 km or 1.5–3.5 km a.g.l.) and the assimilation period length (12 h or 24 h). We find that DA with Lh = 100 km and assimilation from 1.0 to 3.5 km a.g.l. during a 12 h assimilation period length leads to the best scores for PM10 and PM2.5 during the forecast period with reference to available measurements from surface networks. Secondly, the aerosol simulation results without and with lidar DA using the optimal parameters (Lh = 100 km, an assimilation altitude range from 1.0 to 3.5 km a.g.l. and a 12 h DA period) are evaluated using the level 2.0 (cloud-screened and quality-assured) aerosol optical depth (AOD) data from AERONET, and mass concentration measurements (PM10 or PM2.5) from the French air quality (BDQA) network and the EMEP-Spain/Portugal network. The results show that the simulation with DA leads to better scores than the one without DA for PM2.5, PM10and AOD. Additionally, the comparison of model results to evaluation data indicates that the temporal impact of assimilating lidar signals is longer than 36 h after the assimilation period.

Effects of sources and meteorology on particulate matter in the Western Mediterranean Basin: An overview of the DAURE campaign

Abstract: DAURE (Determination of the Sources of Atmospheric Aerosols in Urban and Rural Environments in the Western Mediterranean) was a multidisciplinary international field campaign aimed at investigating the sources and meteorological controls of particulate matter in the Western Mediterranean Basin (WMB). Measurements were simultaneously performed at an urban-coastal (Barcelona, BCN) and a rural-elevated (Montseny, MSY) site pair in NE Spain during winter and summer. State-of-the-art methods such as 14C analysis, proton-transfer reaction mass spectrometry, and high-resolution aerosol mass spectrometry were applied for the first time in the WMB as part of DAURE. WMB regional pollution episodes were associated with high concentrations of inorganic and organic species formed during the transport to inland areas and built up at regional scales. Winter pollutants accumulation depended on the degree of regional stagnation of an air mass under anticyclonic conditions and the planetary boundary layer height. In summer, regional recirculation and biogenic secondary organic aerosols (SOA) formation mainly determined the regional pollutant concentrations. The contribution from fossil sources to organic carbon (OC) and elemental carbon (EC) and hydrocarbon-like organic aerosol concentrations were higher at BCN compared with MSY due to traffic emissions. The relative contribution of nonfossil OC was higher at MSY especially in summer due to biogenic emissions. The fossil OC/EC ratio at MSY was twice the corresponding ratio at BCN indicating that a substantial fraction of fossil OC was due to fossil SOA. In winter, BCN cooking emissions were identified as an important source of modern carbon in primary organic aerosol.

Separation of aerosol fine- and coarse-mode radiative properties: Effect on the mineral dust longwave, direct radiative forcing

Abstract: An improvement of the estimation of mineral dust longwave, direct radiative forcing is presented. It is based on recent developments that combine Sun photometer and multiwavelength lidar data to retrieve range-resolved coarse- and fine-mode extinction coefficients. The forcings are calculated separately for each mode, and their sum is compared to the classical approach in which only the total extinction is considered. The results of four cases of mineral dust intrusion in Barcelona, Spain, show that when the coarse mode predominates, the longwave forcings calculated with the classical approach are underestimated up to 20% near the surface. In all cases the strong coarse-mode predominance near the surface has also an effect on the forcing in the upper layers.

Dimensionless parameterization of lidar for laser remote sensing of the atmosphere and its application to systems with SiPM and PMT detectors

Abstract: In this paper, we show a renewed approach to the generalized methodology for atmospheric lidar assessment, which uses the dimensionless parameterization as a core component. It is based on a series of our previous works where the problem of universal parameterization over many lidar technologies were described and analyzed from different points of view. The modernized dimensionless parameterization concept applied to relatively new silicon photomultiplier detectors (SiPMs) and traditional photomultiplier (PMT) detectors for remote-sensing instruments allowed predicting the lidar receiver performance with sky background available. The renewed approach can be widely used to evaluate a broad range of lidar system capabilities for a variety of lidar remote-sensing applications as well as to serve as a basis for selection of appropriate lidar system parameters for a specific application. Such a modernized methodology provides a generalized, uniform, and objective approach for evaluation of a broad range of lidar types and systems (aerosol, Raman, DIAL) operating on different targets (backscatter or topographic) and under intense sky background conditions. It can be used within the lidar community to compare different lidar instruments.

Variability of Mediterranean aerosols properties at three regional background sites in the western Mediterranean Basin

Abstract: In the framework of the project ChArMEx (the Chemistry-Aerosol Mediterranean Experiment, http://charmex.lsce.ipsl.fr/), the variability of aerosol optical, microphysical and radiative properties is examined in three regional background sites on a southwest – northeast (SW–NE) straight line in the middle of the western Mediterranean Basin (WMB). The three sites are on the northward transport pathway of African dust:  Ersa, Corsica Island, France (43.00oN, 9.36oW, 80 m a.s.l),  Palma de Mallorca, Mallorca Island, Spain (39.55oN, 2.62oE, 10 m a.s.l) and  Alboran, Alboran Island, Spain (35.94oN, 3.04oW, 15 m a.s.l). AERONET (AErosol RObotic NETwork) sun-photometer products are mainly used. A preliminary analysis shows that at Ersa and Palma sites the annual aerosol optical depth (AOD) has a similar trend with a peak around 0.2 in July. The winter/spring AOD is lower in Palma than in Ersa, while it is reverse in summer/autumn. The aerosol particle size distribution (and the coarse mode fraction) shows clearly the SW–NE gradient with a decreasing coarse mode peak (and a decreasing coarse mode fraction from 0.5 - 0.35 - 0.2 in July) along the axis Alboran - Palma de Mallorca - Ersa. In addition to the seasonal and annual variability analysis, the analysis of AERONET products is completed with a large variety of ground-based and sounding balloons remote sensing and in situ instruments during the Special Observation Period (SOP) of the ADRIMED campaign in June 2013. The second part of the presentation will focus on the comparison of the observations at Palma de Mallorca and Ersa of the same long-range transported airmasses. The observations include lidar vertical profiles, balloon borne OPC (Optical Particle Counter) and MSG/SEVIRI AOD, among others.

Dimensionless parameters for lidar performance characterization

Abstract: A set of three dimensionless parameters is proposed to characterize lidar systems. Two of them are based on an asymptotic approximation of the output signal-to-noise ratio as a function of the input optical power reaching the photoreceiver when there is no background radiation. Of these, one is defined as the ratio between the input signal power level coming from a reference range in a reference atmosphere (reference power level) and the input power level that would produce a reference output signal-to-noise ratio if the photoreceiver operated always in signal-shot noise limited regime. The other is defined as the ratio between the reference power level and the input power level for which the signal-induced shot noise power equals the receiver noise power. A third parameter, defined as the ratio between the background optical power at the photoreceiver input and the reference power level, quantifies the effect of background radiation. With these three parameters a good approximation to the output signal-to-noise ratio of the lidar can be calculated as a function of the power reduction with respect to the power reaching the photodetector in the reference situation. These parameters can also be used to compare and rank the performance of different systems.