scispace - formally typeset
Search or ask a question
Institution

Teesside University

EducationMiddlesbrough, Middlesbrough, United Kingdom
About: Teesside University is a education organization based out in Middlesbrough, Middlesbrough, United Kingdom. It is known for research contribution in the topics: Population & Context (language use). The organization has 2155 authors who have published 5540 publications receiving 118373 citations. The organization is also known as: University of Teesside.


Papers
More filters
Journal ArticleDOI
TL;DR: A low‐cost μBR (microbioreactor) made from PTFE [poly(tetrafluoroethylene)] was used to cultivate a model organism, Pseudomonas aeruginosa DS10‐129, which produced pyocyanin and rhamnolipids that had antimicrobial effects against Bacillus subtilis and Staphylococcus aureus.
Abstract: A low-cost microBR (microbioreactor) made from PTFE [poly(tetrafluoroethylene)] was used to cultivate a model organism, Pseudomonas aeruginosa DS10-129. The progress of bioprocessing was monitored by comparing the growth of the organism in a microBR, a conventional bench scale bioreactor and a shake flask. Under the microBR conditions, the organism produced 23 mg/ml of pyocyanin that had antimicrobial effects against Bacillus subtilis, Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas teessidea and Pseudomonas clemancea. Furthermore, it produced a total of 106 microg/ml of effective biosurfactants consisting of dirhamnolipids (RL2) and monorhamnolipids (RL1). The biosurfactants reduced the surface tension of distilled water from 72 to 27.9 mN/m and emulsified kerosene by 71.30%. The pyocyanin and rhamnolipids were produced during the exponential and stationary phases of growth respectively. The results of the microBR were comparable to those obtained using conventional scale methods.

80 citations

Journal ArticleDOI
TL;DR: Improvement in pain and patient satisfaction with the new design of footwear for patients with RA over the traditional design indicates the importance of patient involvement in the design process and throughout the process of supplying and monitoring the footwear.
Abstract: Objectives. The structural and functional changes in the RA foot often affect the patient’s gait and mobility, impacting on the patient’s quality of life. Successful management of these foot pathologies and resultant problems can involve the provision of specialist therapeutic footwear. The aim of the study was to evaluate the value of a new footwear design based on patients’ opinions compared with a traditional footwear design. Method. A total of 80 patients with RA of 5 yrs or more duration, foot deformity, difficulty in being able to obtain suitable retail footwear and self-reported foot pain were recruited. Patients were randomly assigned to either an intervention group (new design) or the control group (traditional design). Patients completed two specific health-related quality of life scales (Foot Health Status Questionnaire and the Foot Function Index) at baseline and after 12 weeks. Results. Only 36 patients completed the trial. Ten refused the footwear outright and 34 withdrew from the study after the footwear was supplied, due to either non-footwear related problems or reasons related to the footwear. Both the specific health related quality of life scales demonstrated significant improvement from baseline to week 12 with the intervention group (P 0.05). Conclusions. Improvement in pain and patient satisfaction with the new design of footwear for patients with RA over the traditional design indicates the importance of patient involvement in the design process and throughout the process of supplying and monitoring the footwear. The fact that the new-design shoe was based on patients’ involvement in the design process in a previous study may be the most important factor in its success. In order to meet the clinical goals of this footwear the patients need to wear them, and to achieve this the patients’ requirements need to be acknowledged.

79 citations

Journal ArticleDOI
TL;DR: The results indicate that occupational role and sex are both important correlates of individuals' representations of aggression, and though agency showed a significant negative zero-order correlation with expressive aggression, the impact of gendered personality traits was diminished when occupation and sex were taken into account.
Abstract: Previous research suggests that men hold an instrumental social representation of aggression in which aggression is viewed as a functional interpersonal act aimed at imposing control over other people while women view aggression in expressive terms as a breakdown of self-control over anger. The present study examines the relative contribution of gendered personality differences (communality—agency) and occupational role in accounting for these differences. Men and women in the armed forces and nursing profession completed the Personal Attributes Questionnaire (PAQ: Spence & Helmreich, 1976) together with a psychometric measure of their tendency to view aggression as expressive rather than instrumental (Expagg: Campbell, Muncer & Coyle, 1992). The results indicate that occupational role and sex are both important correlates of individuals' representations of aggression. Though agency showed a significant negative zero-order correlation with expressive aggression, the impact of gendered personality traits was diminished when occupation and sex were taken into account. The data strongly support social role theory's emphasis upon contemporaneous occupational factors in explaining sex differences in the understanding of aggression but are less supportive of the role of masculine and feminine personality traits.

79 citations

Journal ArticleDOI
TL;DR: In this paper, the authors proposed a PVM comprising CdTe cell, back contacts and back-to-back interconnection technologies as the technology with latent capacity to produce improved performance in tropical climates.
Abstract: The global adoption and use of photovoltaic modules (PVMs) as the main source of energy is the key to realising the UN Millennium Development Goals on Green Energy. The technology – projected to contribute about 20% of world energy supply by 2050, over 60% by 2100 and leading to 50% reduction in global CO2 emissions – is threatened by its poor performance in tropical climate. Such performance discourages its regional acceptance. The magnitude of crucial module performance influencing factors (cell temperature, wind speed and relative humidity) reach critical values of 90 °C, 0.2 m/s and 85%, respectively in tropical climates which negatively impact module performance indices which include power output (PO), power conversion efficiency (PCE) and energy payback time (EPBT). This investigation reviews PVM technologies which include cell, contact and interconnection technologies. It identifies critical technology route(s) with potential to increase operational reliability of PVMs in the tropics when adopted. The cell performance is measured by PO, PCE and EPBT while contacts and interconnections performance is measured by the degree of recombination, shading losses and also the rate of thermo-mechanical degradation. It is found that the mono-crystalline cell has the best PCE of 25% while the Cadmium Telluride (CdTe) cell has the lowest EPBT of 8-months. Results show that the poly-crystalline cell has the largest market share amounting to 54%. The CdTe cell exhibits 0% drop in PCE at high-temperatures and low irradiance operations – demonstrating least affected PO by the conditions. Further results establish that back contacts and back-to-back interconnection technologies produce the least recombination losses and demonstrate absence of shading in addition to possessing longest interconnection fatigue life. Based on these findings, the authors propose a PVM comprising CdTe cell, back contacts and back-to-back interconnection technologies as the technology with latent capacity to produce improved performance in tropical climates.

79 citations

Journal ArticleDOI
TL;DR: A 4-factor solution was discovered that incorporates Catastrophizing, Diversion, Cognitive Coping, and Reinterpreting factors and is a valid utilitarian version of the CSQ that is easy to score and is appropriate for clinical use.
Abstract: Objective: To use principal-components analysis to obtain a shorter and therefore more clinically useful version of the Coping Strategies Questionnaire (CSQ). Subjects: A British sample of 214 chronic back pain patients attending outpatient spinal assessment. Results: A 4-factor solution was discovered that incorporates Catastrophizing, Diversion, Cognitive Coping, and Reinterpreting factors. Apart from the absence of a Praying and Hoping factor, this solution is similar to those previously found by researchers in this field. Conclusions: The new questionnaire (the CSQ24) is a valid utilitarian version of the CSQ that is easy to score and is appropriate for clinical use. In recent years, the effective management of chronic musculoskeletal pain, especially chronic low back pain (CLBP), has become a topical area of research. This is primarily because of a significant increase in the number of people seeking treatment for this condition (Clinical Standards Advisory Group, 1994) and a realization that the majority of common treatment options are unsuccessful (Barton, 2000; Clinical Standards Advisory Group, 1994; Evans & Richards, 1996). Specifically, the observation that physically and pathologically similar patients may react very differently to their condition has led to great interest in the cognitive and behavioral coping mechanisms such patients demonstrate. It was through the work of authors such as Lazarus and Folkman

79 citations


Authors

Showing all 2207 results

NameH-indexPapersCitations
Martin White1962038232387
John Dixon9654336929
Derek K. Jones7637533916
Andrew T. Campbell7534728175
Greg Atkinson7430021725
Alan Burns6342419870
Carolyn Summerbell6319918987
Falko F. Sniehotta6026016194
Roland Lang5914812907
Barry Drust5520910888
Pietro Liò5461320137
Chimay J. Anumba533829445
Mark Taylor5132015426
Victor Chang5039110184
Alan M. Batterham4818313841
Network Information
Related Institutions (5)
Loughborough University
45.1K papers, 1.2M citations

91% related

Deakin University
46.4K papers, 1.1M citations

91% related

RMIT University
82.9K papers, 1.7M citations

91% related

University of Technology, Sydney
46.4K papers, 1M citations

90% related

University of York
56.9K papers, 2.4M citations

89% related

Performance
Metrics
No. of papers from the Institution in previous years
YearPapers
202333
202254
2021460
2020439
2019336
2018311