scispace - formally typeset
Search or ask a question

Showing papers in "arXiv: Soft Condensed Matter in 2021"


Journal ArticleDOI
TL;DR: In this paper, the authors demonstrate that the extent of hydrogel swelling is determined by the competition between the force exerted by hydrogels due to osmotic swelling and the confining force transmitted by the surrounding grains.
Abstract: Hydrogels hold promise in agriculture as reservoirs of water in dry soil, potentially alleviating the burden of irrigation. However, confinement in soil can markedly reduce the ability of hydrogels to absorb water and swell, limiting their widespread adoption. Unfortunately, the underlying reason remains unknown. By directly visualizing the swelling of hydrogels confined in three-dimensional granular media, we demonstrate that the extent of hydrogel swelling is determined by the competition between the force exerted by the hydrogel due to osmotic swelling and the confining force transmitted by the surrounding grains. Furthermore, the medium can itself be restructured by hydrogel swelling, as set by the balance between the osmotic swelling force, the confining force, and intergrain friction. Together, our results provide quantitative principles to predict how hydrogels behave in confinement, potentially improving their use in agriculture as well as informing other applications such as oil recovery, construction, mechanobiology, and filtration.

35 citations


Journal ArticleDOI
TL;DR: In this paper, a chiral liquid matter state, dubbed chiral ferronematic, was proposed, which is stabilized by the local ferroelectric ordering coupled to the chiral helicity.
Abstract: About a century ago, Born proposed a possible matter of state, ferroelectric fluid, might exist if the dipole moment is strong enough. The experimental realisation of such states needs magnifying molecular polar nature to macroscopic scales in liquids. Here, we report on the discovery of a novel chiral liquid matter state, dubbed chiral ferronematic, stabilized by the local ferroelectric ordering coupled to the chiral helicity. It carries the polar vector rotating helically, corresponding to a helieletric structure, analogous to the magnetic counterpart of helimagnet. The state can be retained down to room-temperature and demonstrates gigantic dielectric and nonlinear optical responses. The novel matter state opens a new chapter for exploring the material space of the diverse ferroelectric liquids.

32 citations


Posted Content
TL;DR: In this article, the authors used shape metrology to track morphological changes induced by ultrasonication, enabling quantitative comparison of individual particle morphology and ensemble behavior both in suspensions and cast films.
Abstract: Cellulose nanocrystals (CNCs) are bio-sourced colloidal particles able to self-assemble into chiral photonic structures, but the origin of their mesophase chirality remains unclear. Moreover, the lack of statistically significant characterisation of the particle size and shape make it challenging to apply predictive models. In this work, nanoparticle shape metrology was implemented to track morphological changes induced by ultrasonication, enabling quantitative comparison of individual particle morphology and ensemble behaviour both in suspensions and cast films. The chiral nematic pitch was found to rely on the presence of crystallite bundles, a ubiquitous feature of CNC suspensions not previously associated with their chiral self-assembly. The bundles have an effective helical twisting power of $\beta = 4 \mu\mbox{m}^{-1}$ when modelled as chiral dopants, analogous to those used in molecular liquid crystals. These results indicate that CNC crystallites bundles are the missing link in the hierarchical transfer of chirality from the molecular to colloidal level.

31 citations


Posted Content
TL;DR: In this paper, a comprehensive experimental investigation of hydrogen peroxide formation in water microdroplets produced via pneumatic spraying or capillary condensation has been conducted, where the authors assessed the contributions of the evaporative concentration and shock waves in sprays and the effects of trace O$_3$(g) on the H$2$O$_2$(2) formation.
Abstract: Recent reports on the formation of hydrogen peroxide (H$_2$O$_2$) in water microdroplets produced via pneumatic spraying or capillary condensation have garnered significant attention. How covalent bonds in water could break under such conditions challenges our textbook understanding of physical chemistry and the water substance. While there is no definitive answer, it has been speculated that ultrahigh electric fields at the air-water interface are responsible for this chemical transformation. Here, we resolve this mystery via a comprehensive experimental investigation of H$_2$O$_2$ formation in (i) water microdroplets sprayed over a range of liquid flow-rates, the (shearing) air flow rates, and the air composition (ii) water microdroplets condensed on hydrophobic substrates formed via hot water or humidifier under controlled air composition. Specifically, we assessed the contributions of the evaporative concentration and shock waves in sprays and the effects of trace O$_3$(g) on the H$_2$O$_2$ formation. Glovebox experiments revealed that the H$_2$O$_2$ formation in water microdroplets was most sensitive to the air-borne ozone (O$_3$) concentration. In the absence of O$_3$(g), we could not detect H$_2$O$_2$(aq) in sprays or condensates (detection limit: 250 nM. In contrast, microdroplets exposed to atmospherically relevant O$_3$(g) concentration (10-100 ppb) formed 2-30 $\mu$M H$_2$O$_2$(aq); increasing the gas-liquid surface area, mixing, and contact duration increased H$_2$O$_2$(aq) concentration. Thus, the mystery is resolved - the water surface facilitates the O$_3$(g) mass transfer, which is followed by the chemical transformation of O$_3$(aq) into H$_2$O$_2$(aq). These findings should also help us understand the implications of this chemistry in natural and applied contexts.

27 citations


Journal ArticleDOI
TL;DR: In this paper, the authors discuss recent advances in the self-assembly of self-propelled colloidal particles and highlight some of the most exciting results in this field with a specific focus on dry active matter.
Abstract: In this review we discuss recent advances in the self-assembly of self-propelled colloidal particles and highlight some of the most exciting results in this field with a specific focus on dry active matter. We explore this phenomenology through the lens of the complexity of the colloidal building blocks. We begin by considering the behavior of isotropic spherical particles. We then discuss the case of amphiphilic and dipolar Janus particles. Finally, we show how the geometry of the colloids and/or the directionality of their interactions can be used to control the physical properties of the assembled active aggregates, and suggest possible strategies on how to exploit activity as a tunable driving force for self-assembly. The unique properties of active colloids lend promise for the design of the next generation of functional, environment-sensing microstructures able to perform specific tasks in an autonomous and targeted manner.

27 citations


Posted Content
TL;DR: In this paper, the swap Monte Carlo algorithm was applied to extensive multi-CPU molecular dynamics simulations to explore the first ten decades of the equilibrium dynamics of supercooled liquids near the experimental glass transition.
Abstract: We combine the giant equilibration speedup provided by the swap Monte Carlo algorithm to extensive multi-CPU molecular dynamics simulations to explore the first ten decades of the equilibrium dynamics of supercooled liquids near the experimental glass transition. We demonstrate in particular the emergence of a power law in relaxation spectra, in quantitative agreement with the excess wings observed experimentally. Detailed analysis of particle motion shows that this power law directly originates from broadly distributed processes experienced by rare, localised regions relaxing much before the bulk. We explain why these wings appear in "excess" by constructing an empirical model associating heterogeneous activated dynamics and dynamic facilitation, which appear to be the two minimal physical ingredients revealed by our simulations.

25 citations


Posted Content
TL;DR: In this paper, Brownian dynamics simulations of active stiff polymers undergoing run-reverse dynamics, and so mimicking bacterial swimming, in porous media were performed and it was shown that the effective translational diffusivities of run reverse agents can be enhanced up to two orders in magnitude, compared to their non-reversing counterparts, and exhibit a non-monotonic behavior as a function of the reversal rate.
Abstract: We perform Brownian dynamics simulations of active stiff polymers undergoing run-reverse dynamics, and so mimic bacterial swimming, in porous media. In accord with recent experiments of \emph{Escherichia coli}, the polymer dynamics are characterized by trapping phases interrupted by directed hopping motion through the pores. We find that the effective translational diffusivities of run-reverse agents can be enhanced up to two orders in magnitude, compared to their non-reversing counterparts, and exhibit a non-monotonic behavior as a function of the reversal rate, which we rationalize using a coarse-grained model. Furthermore, we discover a geometric criterion for the optimal spreading, which emerges when their run lengths are comparable to the longest straight path available in the porous medium. More significantly, our criterion unifies results for porous media with disparate pore sizes and shapes and thus provides a fundamental principle for optimal transport of microorganisms and cargo-carriers in densely-packed biological and environmental settings.

25 citations


Posted Content
TL;DR: In this article, power functional theory is used to describe the dynamics of many-body variational variational principle in both overdamped and inertial classical and quantum manybody systems, and the theory operates on the level of time-dependent one-body correlation functions.
Abstract: The rich and diverse dynamics of particle-based systems ultimately originates from the coupling of their degrees of freedom via internal interactions. To arrive at a tractable approximation of such many-body problems, coarse-graining is often an essential step. Power functional theory provides a unique and microscopically sharp formulation of this concept. The approach is based on an exact one-body variational principle to describe the dynamics of both overdamped and inertial classical and quantum many-body systems. In equilibrium, density functional theory is recovered, and hence spatially inhomogeneous systems are described correctly. The dynamical theory operates on the level of time-dependent one-body correlation functions. Two- and higher-body correlation functions are accessible via the dynamical test particle limit and the nonequilibrium Ornstein-Zernike route. We describe the structure of this functional approach to many-body dynamics, including much background as well as applications to a broad range of dynamical situations, such as the van Hove function in liquids, flow in nonequilibrium steady states, motility-induced phase separation of active Brownian particles, lane formation in binary colloidal mixtures, and both steady and transient shear phenomena.

24 citations


Journal ArticleDOI
TL;DR: In this paper, the authors use simulations to investigate the competition between homogeneous and heterogeneous crystallization in hard-sphere model systems and find that the apparent overall nucleation rates coincide with those reported in "homogeneous nucleation" experiments.
Abstract: Hard-sphere model systems are well-suited in both experiment and simulations to investigate fundamental aspects of the crystallization of fluids. In experiments on colloidal models of hard-sphere fluids, the uid is unavoidably at contact with the walls of the sample cell, where heterogeneous crystallization may take place. In this work we use simulations to investigate the competition between homogeneous and heterogeneous crystallization. We report simulations of wall-induced nucleation for different confining walls. Combining the results of these simulations with earlier studies of homogeneous allows us to asses the competition between homogeneous and heterogeneous nucleation as a function of wall type, fluid density and the system size. On at walls, heterogeneous nucleation will typically overwhelm homogeneous nucleation. However, even for surfaces randomly coated with spheres with a diameter that was some three times larger than that of the fluid spheres - as has been used in some experiments - heterogeneous nucleation is likely to be dominant for volume fractions smaller than 0.535. Only for a disordered coating that has the same structure as the liquid holds promise did we find the nucleation was likely to occur in the bulk. Hence, such coatings might be used to suppress heterogeneous nucleation in experiments. Finally, we report the apparent homogeneous nucleation rate taking into account the formation of crystallites both in the bulk and at the walls. We find that the apparent overall nucleation rates coincides with those reported in "homogeneous nucleation" experiments. This suggests that heterogeneous nucleation at the walls could partly explain the large discrepancies found between experimental measurements and simulation estimates of the homogeneous nucleation rate.

24 citations


Journal ArticleDOI
TL;DR: In this paper, the in situ electrokinetic assessment of aqueous particles in conjunction with the addition of anionic adsorbates was developed and examined for the scalable characterization of the specific accessible surface area of particles in water.
Abstract: By means of the in situ electrokinetic assessment of aqueous particles in conjunction with the addition of anionic adsorbates, we develop and examine a new approach to the scalable characterization of the specific accessible surface area of particles in water. For alumina powders of differing morphology in mildly acidic aqueous suspensions, the effective surface charge was modified by carboxylate anion adsorption through the incremental addition of oxalic and citric acids. The observed zeta potential variation as a function of the proportional reagent additive was found to exhibit inverse hyperbolic sine-type behavior predicted to arise from monolayer adsorption following the Grahame-Langmuir model. Through parameter optimization by inverse problem solving, the zeta potential shift with relative adsorbate addition revealed a nearly linear correlation of a defined surface-area-dependent parameter with the conventionally measured surface area values of the powders, demonstrating that the proposed analytical framework is applicable for the in situ surface area characterization of aqueous particulate matter. The investigated methods have advantages over some conventional surface analysis techniques owing to their direct applicability in aqueous environments at ambient temperature and the ability to modify analysis scales by variation of the adsorption cross section.

23 citations


Posted Content
TL;DR: In this article, the authors derived an effective theory for MRE rods under geometrically nonlinear 3D deformation, based on reducing the 3D magneto-elastic energy functional for the hard MREs into a 1D Kirchhoff-like description.
Abstract: Magneto-rheological elastomers (MREs) are functional materials that can be actuated by applying an external magnetic field. MREs comprise a composite of hard magnetic particles dispersed into a nonmagnetic elastomeric matrix. By applying a strong magnetic field, one can magnetize the structure to program its deformation under the subsequent application of an external field. Hard MREs, whose coercivities are large, have been receiving particular attention because the programmed magnetization remains unchanged upon actuation. Hence, once a structure made of a hard MRE is magnetized, it can be regarded as magnetized permanently. Motivated by a new realm of applications, there have been significant theoretical developments in the continuum description of hard MREs. By reducing the 3D description into 1D or 2D via dimensional reduction, several theories of hard magnetic slender structures such as linear beams, elastica, and shells have been recently proposed. In this paper, we derive an effective theory for MRE rods under geometrically nonlinear 3D deformation. Our theory is based on reducing the 3D magneto-elastic energy functional for the hard MREs into a 1D Kirchhoff-like description. Restricting the theory to 2D, we reproduce previous works on planar deformations. For further validation in the general case of 3D deformation, we perform precision experiments with both naturally straight and curved rods under either constant or constant-gradient magnetic fields. Our theoretical predictions are in excellent agreement with both discrete simulations and precision-model experiments. Finally, we discuss some limitations of our framework, as highlighted by the experiments, where long-range dipole interactions, which are neglected in the theory, can play a role.

Posted Content
TL;DR: In this article, the authors propose the notion of "energetic rigidity", in which all non-trivial deformations raise the energy of a structure, which is a more useful notion of rigidity in practice than two more commonly used rigidity tests: first-order rigidity and second-order rigidness.
Abstract: Rigidity regulates the integrity and function of many physical and biological systems. This is the first of two papers on the origin of rigidity, wherein we propose that "energetic rigidity," in which all non-trivial deformations raise the energy of a structure, is a more useful notion of rigidity in practice than two more commonly used rigidity tests: Maxwell-Calladine constraint counting (first-order rigidity) and second-order rigidity. We find that constraint counting robustly predicts energetic rigidity only when the system has no states of self stress. When the system has states of self stress, we show that second-order rigidity can imply energetic rigidity in systems that are not considered rigid based on constraint counting, and is even more reliable than shear modulus. We also show that there may be systems for which neither first nor second-order rigidity imply energetic rigidity. The formalism of energetic rigidity unifies our understanding of mechanical stability and also suggests new avenues for material design.

Posted ContentDOI
TL;DR: A facile method to determine the viscosity of bilayer membranes from the transient deformation of giant unilamellar vesicles induced by a uniform electric field is described, enabling fast and consistent collection of data that will advance understanding of biomembrane dynamics.
Abstract: Viscosity is a key mechanical property of cell membranes that controls time-dependent processes such as membrane deformation and diffusion of embedded inclusions. Despite its importance, membrane viscosity remains poorly characterized because existing methods rely on complex experimental designs and/or analyses. Here, we describe a facile method to determine the viscosity of bilayer membranes from the transient deformation of giant unilamellar vesicles induced by a uniform electric field. The method is non-invasive, easy to implement, probe-independent, high-throughput, and sensitive enough to discern membrane viscosity of different lipid types, lipid phases, and polymers in a wide range, from 10$^{-8}$ to 10$^{-4}$ Pa.s.m. It enables fast and consistent collection of data that will advance understanding of biomembrane dynamics.

Posted Content
TL;DR: In this paper, the role of macromolecular elastic networks in liquid-liquid phase separation is investigated and it is shown that pore size-limited droplets may emerge in chromatin networks, with implications for structure and function of nucleoplasmic condensates.
Abstract: Demixing of multicomponent biomolecular systems via liquid-liquid phase separation (LLPS) has emerged as a potentially unifying mechanism governing the formation of several membrane-less intracellular organelles ("condensates"), both in the cytoplasm (e.g., stress granules) and in the nucleoplasm (e.g., nucleoli). While both in vivo experiments and studies of synthetic systems demonstrate that LLPS is strongly affected by the presence of a macromolecular elastic network, a fundamental understanding of the role of such networks on LLPS is still lacking. Here we show that, upon accounting for capillary forces responsible for network expulsion, small-scale heterogeneity of the network, and its nonlinear mechanical properties, an intriguing picture of LLPS emerges. Specifically, we predict that, in addition to the experimentally observed cavitated droplets which fully exclude the network, two other phases are thermodynamically possible: elastically arrested, size-limited droplets at the network pore scale, and network-including macroscopic droplets. In particular, pore size-limited droplets may emerge in chromatin networks, with implications for structure and function of nucleoplasmic condensates.

Posted Content
TL;DR: In this article, the viscosity of bilayer membranes can be obtained from the transient deformation of giant unilamellar vesicles, which enables a non-invasive, probe-independent and high-throughput measurement of the bilayers made of lipids or polymers with a wide range of compositions and phase state.
Abstract: Viscosity is a key property of cell membranes that controls mobility of embedded proteins and membrane remodeling. Measuring it is challenging because existing approaches involve complex experimental designs and/or models, and the applicability of some is limited to specific systems and membrane compositions. As a result there is scarcity of data and the reported values for membrane viscosity vary by orders of magnitude for the same system. Here, we show how viscosity of bilayer membranes can be obtained from the transient deformation of giant unilamellar vesicles. The approach enables a non-invasive, probe-independent and high-throughput measurement of the viscosity of bilayers made of lipids or polymers with a wide range of compositions and phase state. Pure lipid and single-phase mixed bilayers are found to behave as Newtonian fluids with strain-rate independent viscosity, while phase-separated and diblock-copolymers systems exhibit shear-thinning in the explored range of strain rates 1-2000 $s^{-1}$. The results also reveal that electrically polarized bilayers can be significantly more viscous than charge-neutral bilayers. These findings suggest that biomembrane viscosity is a dynamic property that can be actively modulated not only by composition but also by membrane polarization, e.g., as in action potentials.

Posted Content
TL;DR: In this paper, the authors introduce compression of corrugated elastic sheets to precisely observe and manipulate their full, multi-step pathways, which are reproducible, robust, and controlled by geometry.
Abstract: The nonlinear response of driven complex materials, disordered magnets, amorphous media, crumpled sheets, features intricate transition pathways where the system repeatedly hops between metastable states. Such pathways encode memory effects and may allow information processing, yet tools are lacking to experimentally observe and control these pathways, and their full breadth has not been explored. Here we introduce compression of corrugated elastic sheets to precisely observe and manipulate their full, multi-step pathways, which are reproducible, robust, and controlled by geometry. We show how manipulation of the boundaries allows to elicit multiple targeted pathways from a single sample. In all cases, each state in the pathway can be encoded by the binary state of material 'bits' called hysterons, and the strength of their interactions plays a crucial role. In particular, as function of increasing interaction strength, we observe Preisach pathways, expected in systems of independently switching hysterons, 'scrambled' pathways that evidence hitherto unexplored interactions between these material bits, and 'accumulator' pathways which leverage these interactions to perform an elementary computation. Our work opens a route to probe, manipulate and understand complex pathways, impacting future applications in soft robotics and information processing in materials.

Journal ArticleDOI
TL;DR: In this article, the authors employ the on-the-fly probability enhanced sampling method that is a recent evolution of metadynamics for crystallization simulations and apply it to the study of crystallization of a multicomponent system, Sodium Chloride and a molecular system, Carbon Dioxide.
Abstract: The phenomenon of solidification of a substance from its liquid phase is of the greatest practical and theoretical importance, and atomistic simulations can provide precious information towards its understanding and control. Unfortunately, the time scale for crystallization is much larger than what can be explored in standard simulations. Enhanced sampling methods can overcome this time scale hurdle. Here we employ the on-the-fly probability enhanced sampling method that is a recent evolution of metadynamics. This method, like many others, relies on the definition of appropriate collective variables able to capture the slow degrees of freedom. To this effect we introduce collective coordinates of general applicability to crystallization simulations. They are based on the peaks of the three-dimensional structure factor that are combined non-linearly via the Deep Linear Discriminant Analysis machine learning method. We apply the method to the study of crystallization of a multicomponent system, Sodium Chloride and a molecular system, Carbon Dioxide.

Posted Content
TL;DR: In this paper, the interfacial buckling of a kinetically arrested cellulose nanocrystal (CNC) suspension within an emulsified microdroplet is exploited to produce cellulosic photonic pigments using a scalable methodology.
Abstract: When pursuing sustainable approaches to fabricate photonic structures, nature can be used as a source of inspiration for both the nanoarchitecture and the constituent materials. Although several biomaterials have been promised as suitable candidates for photonic materials and pigments, their fabrication processes have been limited to the small to medium-scale production of films. Here, the interfacial buckling of a kinetically arrested cellulose nanocrystal (CNC) suspension within an emulsified microdroplet is exploited to produce cellulosic photonic pigments using a scalable methodology. The controlled removal of water from the buckled microparticles allows for the inherent limitations of CNC self-assembly under spherical confinement to be overcome, resulting in vibrant red, green, and blue dispersions of photonic CNC pigments. The hierarchical structure of these pigments enables the production of coatings with angular independent colour, offering a consistent visual appearance across a wide range of viewing angles.

Journal ArticleDOI
TL;DR: In this paper, the authors numerically study the multi-scale properties of a 2D active gel to address the energy transfer mechanism and find that activity is able to excite long-ranged distortions of the nematic pattern giving rise to spontaneous laminar flows and to a chaotic regime by further increasing the rate of active energy injection.
Abstract: We numerically study the multi-scale properties of a 2d active gel to address the energy transfer mechanism. We find that activity is able to excite long-ranged distortions of the nematic pattern giving rise to spontaneous laminar flows and to a chaotic regime by further increasing the rate of active energy injection. By means of a scale-to-scale spectral analysis we find that the gel is basically driven by the local balancing between active injection and viscous dissipation, without any signal of non-linear hydrodynamical transfer and turbulent cascades. Furthermore, elasticity may qualitatively play an important role by transferring energy from small to larger scales through nemato-hydrodynamic interactions.

Posted Content
TL;DR: In this paper, the authors provide a strategy for the quantitative analysis of a large class of non-equilibrium systems in a steady state using the short-time Thermodynamic Uncertainty Relation (TUR).
Abstract: We provide a \textit{minimal} strategy for the quantitative analysis of a large class of non-equilibrium systems in a steady state using the short-time Thermodynamic Uncertainty Relation (TUR). From short-time trajectory data obtained from experiments, we demonstrate how we can simultaneously infer quantitatively, both the \textit{thermodynamic force field} acting on the system, as well as the exact rate of entropy production. We benchmark this scheme first for an experimental study of a colloidal particle system where exact analytical results are known, before applying it to the case of a colloidal particle in a hydrodynamical flow field, where neither analytical nor numerical results are available. Our scheme hence provides a means, potentially exact for a large class of systems, to get a quantitative estimate of the entropy produced in maintaining a non-equilibrium system in a steady state, directly from experimental data.

Posted ContentDOI
TL;DR: In this article, particle-based simulations of an elastic vesicle containing a collection of polar active filaments are performed to study a minimal model of such a system, and simple scaling models reveal the mechanisms underlying these emergent behaviors and yield design principles for engineering active materials with targeted shape dynamics.
Abstract: In active matter systems, deformable boundaries provide a mechanism to organize internal active stresses and perform work on the external environment To study a minimal model of such a system, we perform particle-based simulations of an elastic vesicle containing a collection of polar active filaments The interplay between the active stress organization due to interparticle interactions and that due to the deformability of the confinement leads to a variety of filament spatiotemporal organizations that have not been observed in bulk systems or under rigid confinement, including highly-aligned rings and caps In turn, these filament assemblies drive dramatic and tunable transformations of the vesicle shape and its dynamics We present simple scaling models that reveal the mechanisms underlying these emergent behaviors and yield design principles for engineering active materials with targeted shape dynamics

Journal ArticleDOI
TL;DR: In this paper, the authors revisited these measurements and analyzed the interface profiles of very diluted polyethylene oxide solutions at high temporal and spatial resolution, showing that they are very well described by the model.
Abstract: When pushed out of a syringe, polymer solutions form droplets attached by long and slender cylindrical filaments whose diameter decreases exponentially with time before eventually breaking. In the last stages of this process, a striking feature is the self-similarity of the solution shape near the end of the filament. This means that shapes at different times, if properly rescaled, collapse onto one universal shape. A theoretical description inspired by this similarity observation and based on the Oldroyd-B model was recently shown to disagree with existing experimental results. By revisiting these measurements and analysing the interface profiles of very diluted polyethylene oxide solutions at high temporal and spatial resolution, we show that they are very well described by the model.

Journal ArticleDOI
TL;DR: In this article, the authors extend the generality of these non-classical nucleation processes, showing that layered and onion-like structures can emerge solely based on structural fluctuations even in absence of free-energy differences.
Abstract: The nucleation of crystals from the liquid melt is often characterized by a competition between different crystalline structures or polymorphs, and can result in nuclei with heterogeneous compositions. These mixed-phase nuclei can display nontrivial spatial arrangements, such as layered and onion-like structures, whose composition varies according to the radial distance, and which so far have been explained on the basis of bulk and surface free-energy differences between the competing phases. Here we extend the generality of these non-classical nucleation processes, showing that layered and onion-like structures can emerge solely based on structural fluctuations even in absence of free-energy differences. We consider two examples of competing crystalline structures, hcp and fcc forming in hard spheres, relevant for repulsive colloids and dense liquids, and the cubic and hexagonal diamond forming in water, relevant also for other group 14 elements such as carbon and silicon. We introduce a novel structural order parameter that combined with a neural network classification scheme allows us to study the properties of the growing nucleus from the early stages of nucleation. We find that small nuclei have distinct size fluctuations and compositions from the nuclei that emerge from the growth stage. The transition between these two regimes is characterized by the formation of onion-like structures, in which the composition changes with the distance from the center of the nucleus, similarly to what seen in two-step nucleation process.

Posted ContentDOI
TL;DR: In this article, it was shown that an initially random distribution of either ideal vortices in an inviscid fluid, or driven rotors in a viscous membrane, spontaneously self assembles.
Abstract: Ensembles of particles rotating in a two-dimensional fluid can exhibit chaotic dynamics yet develop signatures of hidden order. Such "rotors" are found in the natural world spanning vastly disparate length scales - from the rotor proteins in cellular membranes to models of atmospheric dynamics. Here we show that an initially random distribution of either ideal vortices in an inviscid fluid, or driven rotors in a viscous membrane, spontaneously self assembles. Despite arising from drastically different physics, these systems share a Hamiltonian structure that sets geometrical conservation laws resulting in distinct structural states. We find that the rotationally invariant interactions isotropically suppress long wavelength fluctuations - a hallmark of a disordered hyperuniform material. With increasing area fraction, the system orders into a hexagonal lattice. In mixtures of two co-rotating populations, the stronger population will gain order from the other and both will become phase enriched. Finally, we show that classical 2D point vortex systems arise as exact limits of the experimentally accessible microscopic membrane rotors, yielding a new system through which to study topological defects.

Journal ArticleDOI
TL;DR: In this article, the FENE-P constitutive equation and a viscoelastic aging model are used to distinguish thixotropy from visco-elasticity.
Abstract: Owing to nonlinear viscoelasticity, materials often show characteristic features that resemble those of thixotropy. This issue has been debated in the literature over the past several decades, and several experimental protocols have been proposed to distinguish thixotropy from viscoelasticity. In this work, we assess these protocols by carrying out experiments using polymer solutions, thixotropic clay dispersions, and modeling their behavior, respectively, using the FENE-P constitutive equation and a viscoelastic aging model. We find that the criteria proposed in the literature, such as a step down jump in the shear rate and shear startup at different waiting times elapsed since preshear, are inadequate to distinguish thixotropy from viscoelasticity. In marked contrast, we show that the application of step-strain or step-stress after cessation of the preshear serves as a useful discriminant between thixotropy and viscoelasticity. In thixotropic materials, we observe that the application of step strain (or step stress) after cessation of the preshear eventually leads to slowing down of relaxation dynamics as a function of waiting time. However, for viscoelastic materials, the relaxation modulus (creep compliance) curve shifts to lower modulus (higher compliance) values as a function of waiting time until equilibrium is reached. While the proposed criterion offers a robust distinction between viscoelasticity and thixotropy for the systems studied here, further experimental investigations based on other systems are needed to establish its versatility and will lead to a greater insight into this long-standing issue in rheological categorization.

Journal ArticleDOI
TL;DR: In this paper, the topological properties of the H-bond network change across the liquid-liquid transition and the structure of the high-density liquid, characterised by the existence of interstitial molecules and commonly explained in terms of the collapse of the second neighbour shell, actually originates from the folding back of long rings, bringing pairs of molecules separated by several hydrogen-bonds close by in space.
Abstract: It has recently been shown that the TIP4P/Ice model of water can be studied numerically in metastable equilibrium at and below its liquid-liquid critical temperature. We report here simulations along a subcritical isotherm, for which two liquid states with the same pressure and temperature, but different density, can be equilibrated. This allows for a clear visualisation of the structural changes taking place across the transition. We specifically focus on how the topological properties of the H-bond network change across the liquid-liquid transition. Our results demonstrate that the structure of the high-density liquid, characterised by the existence of interstitial molecules and commonly explained in terms of the collapse of the second neighbour shell, actually originates from the folding back of long rings, bringing pairs of molecules separated by several hydrogen-bonds close by in space.

Journal ArticleDOI
TL;DR: In this paper, the authors review progress in understanding colloidal gels made through the use of real space analysis and particle resolved studies and consider the challenges of obtaining a suitable experimental system where the refractive index and density of the colloidal particles is matched to that of the solvent.
Abstract: Colloidal gels constitute an important class of materials found in many contexts and with a wide range of applications. Yet as matter far from equilibrium, gels exhibit a variety of time-dependent behaviours, which can be perplexing, such as an increase in strength prior to catastrophic failure. Remarkably, such complex phenomena are faithfully captured by an extremely simple model - "sticky spheres". Here we review progress in our understanding of colloidal gels made through the use of real space analysis and particle resolved studies. We consider the challenges of obtaining a suitable experimental system where the refractive index and density of the colloidal particles is matched to that of the solvent. We review work to obtain a particle-level mechanism for rigidity in gels and the evolution of our understanding of time-dependent behaviour, from early-time aggregation to ageing, before considering the response of colloidal gels to deformation and then move on to more complex systems of anisotropic particles and mixtures. Finally we note some more exotic materials with similar properties.

Posted Content
TL;DR: In this paper, the authors introduce a minimal realization of an active elastic solid, in which they characterize the emergence of selective and collective actuation and fully map out the interplay between activity, elasticity and geometry.
Abstract: Active solids consist of elastically coupled out-of-equilibrium units performing work. They are central to autonomous processes, such as locomotion, self-oscillations and rectification, in biological systems,designer materials and robotics. Yet, the feedback mechanism between elastic and active forces, and the possible emergence of collective behaviours in a mechanically stable elastic solid remains elusive. Here we introduce a minimal realization of an active elastic solid, in which we characterize the emergence of selective and collective actuation and fully map out the interplay between activity, elasticity and geometry. Polar active agents exert forces on the nodes of a two dimensional elastic lattice. The resulting displacement field nonlinearly reorients the active agents. For large enough coupling, a collective oscillation of the lattice nodes around their equilibrium position emerges. Only a few elastic modes are actuated and, crucially, they are not necessarily the lowest energy ones. Combining experiments with the numerical and theoretical analysis of an agents model, we unveil the bifurcation scenario and the selection mechanism by which the collective actuation takes place. Our findings may provide a new mechanism for oscillatory dynamics in biological tissues and specifically confluent cell monolayers. The present selection mechanism may also be advantageous in providing meta-materials, with bona fide autonomy.

Posted Content
TL;DR: In this paper, the authors investigate the constitutive relation of confluent tissues under simple shear deformation and show that an undeformed fluid-like tissue acquires finite rigidity above a critical applied strain.
Abstract: Biological processes, from morphogenesis to tumor invasion, spontaneously generate shear stresses inside living tissue. The mechanisms that govern the transmission of mechanical forces in epithelia and the collective response of the tissue to bulk shear deformations remain, however, poorly understood. Using a minimal cell-based computational model, we investigate the constitutive relation of confluent tissues under simple shear deformation. We show that an undeformed fluid-like tissue acquires finite rigidity above a critical applied strain. This is akin to the shear-driven rigidity observed in other soft matter systems. Interestingly, shear-driven rigidity in tissue is a first-order transition and can be understood as arising from the second order critical point that governs the liquid-solid transition of the undeformed system. We further show that a solid-like tissue responds linearly only to infinitesimally small strains and rapidly switches to a nonlinear response, with substantial stress stiffening. Finally, we propose a mean-field formulation for cells under shear that offers a simple physical explanation of shear-driven rigidity and nonlinear response in a tissue.

Journal ArticleDOI
TL;DR: In this paper, the authors performed rheological measurements of the typical deep eutectic solvents (DESs) glyceline, ethaline, and reline in a very broad temperature and dynamic range.
Abstract: We performed rheological measurements of the typical deep eutectic solvents (DESs) glyceline, ethaline, and reline in a very broad temperature and dynamic range, extending from the low-viscosity to the high-viscosity supercooled-liquid regime. We find that the mechanical compliance spectra can be well described by the random free-energy barrier hopping model, while the dielectric spectra on the same materials involve significant contributions arising from reorientational dynamics. The temperature-dependent viscosity and structural relaxation time, revealing non-Arrhenius behavior typical for glassy freezing, are compared to the ionic dc conductivity and relaxation times determined by broadband dielectric spectroscopy. For glyceline and ethaline we find essentially identical temperature dependences for all dynamic quantities. These findings point to a close coupling of the ionic and molecular translational and reorientational motions in these systems. However, for reline the ionic charge transport appears decoupled from the structural and reorientational dynamics, following a fractional Walden rule. Especially, at low temperatures the ionic conductivity in this DES is enhanced by about one decade compared to expectations based on the temperature dependence of the viscosity. The results for all three DESs can be understood without invoking a revolving-door mechanism previously considered as a possible charge-transport mechanism in DESs.