Showing papers in "Proceedings of The Royal Society A: Mathematical, Physical and Engineering Sciences in 2016"

Submesoscale currents in the ocean.

Abstract: This article is a perspective on the recently discovered realm of submesoscale currents in the ocean. They are intermediate-scale flow structures in the form of density fronts and filaments, topographic wakes and persistent coherent vortices at the surface and throughout the interior. They are created from mesoscale eddies and strong currents, and they provide a dynamical conduit for energy transfer towards microscale dissipation and diapycnal mixing. Consideration is given to their generation mechanisms, instabilities, life cycles, disruption of approximately diagnostic force balance (e.g. geostrophy), turbulent cascades, internal-wave interactions, and transport and dispersion of materials. At a fundamental level, more questions remain than answers, implicating a programme for further research.

Large deformations of planar extensible beams and pantographic lattices: Heuristic homogenization, experimental and numerical examples of equilibrium

Abstract: The aim of this paper is to find a computationally efficient and predictive model for the class of systems that we call ‘pantographic structures’. The interest in these materials was increased by the possibilities opened by the diffusion of technology of three-dimensional printing. They can be regarded, once choosing a suitable length scale, as families of beams (also called fibres) interconnected to each other by pivots and undergoing large displacements and large deformations. There are, however, relatively few ‘ready-to-use’ results in the literature of nonlinear beam theory. In this paper, we consider a discrete spring model for extensible beams and propose a heuristic homogenization technique of the kind first used by Piola to formulate a continuum fully nonlinear beam model. The homogenized energy which we obtain has some peculiar and interesting features which we start to describe by solving numerically some exemplary deformation problems. Furthermore, we consider pantographic structures, find the corresponding homogenized second gradient deformation energies and study some planar problems. Numerical solutions for these two-dimensional problems are obtained via minimization of energy and are compared with some experimental measurements, in which elongation phenomena cannot be neglected.

The mixed coupled nonlinear Schrödinger equation on the half-line via the Fokas method.

Abstract: In this paper, we implement the Fokas method to study initial-boundary value problems of the mixed coupled nonlinear Schrodinger equation formulated on the half-line with Lax pairs involving 3×3 matrices. The solution can be written in terms of the solution to a 3×3 Riemann–Hilbert problem. The relevant jump matrices are explicitly expressed in terms of the matrix-value spectral functions s ( k ) and S ( k ), which are determined by the initial values and boundary values at x =0, respectively. Some of these boundary values are unknown; however, using the fact that these specific functions satisfy a certain global relation , the unknown boundary values can be expressed in terms of the given initial and boundary data.

Buckling of spherical shells revisited

Abstract: A study is presented of the post-buckling behaviour and imperfection sensitivity of complete spherical shells subject to uniform external pressure. The study builds on and extends the major contrib...

Aerodynamics, sensing and control of insect-scale flapping-wing flight

Abstract: There are nearly a million known species of flying insects and 13 000 species of flying warm-blooded vertebrates, including mammals, birds and bats. While in flight, their wings not only move forward relative to the air, they also flap up and down, plunge and sweep, so that both lift and thrust can be generated and balanced, accommodate uncertain surrounding environment, with superior flight stability and dynamics with highly varied speeds and missions. As the size of a flyer is reduced, the wing-to-body mass ratio tends to decrease as well. Furthermore, these flyers use integrated system consisting of wings to generate aerodynamic forces, muscles to move the wings, and sensing and control systems to guide and manoeuvre. In this article, recent advances in insect-scale flapping-wing aerodynamics, flexible wing structures, unsteady flight environment, sensing, stability and control are reviewed with perspective offered. In particular, the special features of the low Reynolds number flyers associated with small sizes, thin and light structures, slow flight with comparable wind gust speeds, bioinspired fabrication of wing structures, neuron-based sensing and adaptive control are highlighted.

Experimental demonstration of information to energy conversion in a quantum system at the Landauer limit.

Abstract: Landauer's principle sets fundamental thermodynamical constraints for classical and quantum information processing, thus affecting not only various branches of physics, but also of computer science and engineering. Despite its importance, this principle was only recently experimentally considered for classical systems. Here we employ a nuclear magnetic resonance set-up to experimentally address the information to energy conversion in a quantum system. Specifically, we consider a three nuclear spins [Formula: see text] (qubits) molecule-the system, the reservoir and the ancilla-to measure the heat dissipated during the implementation of a global system-reservoir unitary interaction that changes the information content of the system. By employing an interferometric technique, we were able to reconstruct the heat distribution associated with the unitary interaction. Then, through quantum state tomography, we measured the relative change in the entropy of the system. In this way, we were able to verify that an operation that changes the information content of the system must necessarily generate heat in the reservoir, exactly as predicted by Landauer's principle. The scheme presented here allows for the detailed study of irreversible entropy production in quantum information processors.

Nonlinear regularization operators as derived from the micromorphic approach to gradient elasticity, viscoplasticity and damage.

Abstract: The construction of regularization operators presented in this work is based on the introduction of strain or damage micromorphic degrees of freedom in addition to the displacement vector and of their gradients into the Helmholtz free energy function of the constitutive material model. The combination of a new balance equation for generalized stresses and of the micromorphic constitutive equations generates the regularization operator. Within the small strain framework, the choice of a quadratic potential w.r.t. the gradient term provides the widely used Helmholtz operator whose regularization properties are well known: smoothing of discontinuities at interfaces and boundary layers in hardening materials, and finite width localization bands in softening materials. The objective is to review and propose nonlinear extensions of micromorphic and strain/damage gradient models along two lines: the first one introducing nonlinear relations between generalized stresses and strains; the second one envisaging several classes of finite deformation model formulations. The generic approach is applicable to a large class of elastoviscoplastic and damage models including anisothermal and multiphysics coupling. Two standard procedures of extension of classical constitutive laws to large strains are combined with the micromorphic approach: additive split of some Lagrangian strain measure or choice of a local objective rotating frame. Three distinct operators are finally derived using the multiplicative decomposition of the deformation gradient. A new feature is that a free energy function depending solely on variables defined in the intermediate isoclinic configuration leads to the existence of additional kinematic hardening induced by the gradient of a scalar micromorphic variable.

Perspectives on magnetic reconnection.

Abstract: Magnetic reconnection is a topological rearrangement of magnetic field that occurs on time scales much faster than the global magnetic diffusion time. Since the field lines break on microscopic scales but energy is stored and the field is driven on macroscopic scales, reconnection is an inherently multi-scale process that often involves both magnetohydrodynamic (MHD) and kinetic phenomena. In this article, we begin with the MHD point of view and then describe the dynamics and energetics of reconnection using a two-fluid formulation. We also focus on the respective roles of global and local processes and how they are coupled. We conclude that the triggers for reconnection are mostly global, that the key energy conversion and dissipation processes are either local or global, and that the presence of a continuum of scales coupled from microscopic to macroscopic may be the most likely path to fast reconnection.

Symmetric waterbomb origami.

Abstract: The traditional waterbomb origami, produced from a pattern consisting of a series of vertices where six creases meet, is one of the most widely used origami patterns. From a rigid origami viewpoint, it generally has multiple degrees of freedom, but when the pattern is folded symmetrically, the mobility reduces to one. This paper presents a thorough kinematic investigation on symmetric folding of the waterbomb pattern. It has been found that the pattern can have two folding paths under certain circumstance. Moreover, the pattern can be used to fold thick panels. Not only do the additional constraints imposed to fold the thick panels lead to single degree of freedom folding, but the folding process is also kinematically equivalent to the origami of zero-thickness sheets. The findings pave the way for the pattern being readily used to fold deployable structures ranging from flat roofs to large solar panels.

Globalization and pollution: tele-connecting local primary PM2.5 emissions to global consumption.

Abstract: Globalization pushes production and consumption to geographically diverse locations and generates a variety of sizeable opportunities and challenges. The distribution and associated effects of short-lived primary fine particulate matter (PM2.5), a representative of local pollution, are significantly affected by the consumption through global supply chain. Tele-connection is used here to represent the link between production and consumption activity at large distances. In this study, we develop a global consumption-based primary PM2.5 emission inventory to track primary PM2.5 emissions embodied in the supply chain and evaluate the extent to which local PM2.5 emissions are triggered by international trade. We further adopt consumption-based accounting and identify the global original source that produced the emissions. We find that anthropogenic PM2.5 emissions from industrial sectors accounted for 24 Tg globally in 2007; approximately 30% (7.2 Tg) of these emissions were embodied in export of products principally from Brazil, South Africa, India and China (3.8 Tg) to developed countries. Large differences (up to 10 times) in the embodied emissions intensity between net importers and exporters greatly increased total global PM2.5 emissions. Tele-connecting production and consumption activity provides valuable insights with respect to mitigating long-range transboundary air pollution and prompts concerted efforts aiming at more environmentally conscious globalization.

H2 production by the photocatalytic reforming of cellulose and raw biomass using Ni, Pd, Pt and Au on titania

Abstract: Here, we report a method for sustainable hydrogen production using sunlight and biomass. It is shown that cellulose can be photoreformed to produce hydrogen, even in solid form, by use of metal-loaded titania photocatalysts. The experiments performed verified that the process is enabled by initial hydrolysis via glucose, which itself is shown to be efficiently converted to produce hydrogen by photocatalysis. Importantly, it is shown that not only precious metals such as Pt, Pd and Au can be used as the metal component, but also much more economic and less environmentally damaging Ni is effective. Even more importantly, we show for the first time, to the best our knowledge, that fescue grass as raw biomass can be effective for hydrogen production without significant pre-treatment. This provides additional benefits for the efficiency of biomass hydrogen production, because fewer processing steps for the raw material are required than in the production of purer forms of cellulose, for example.

Dynamics of a susceptible–infected–susceptible epidemic reaction–diffusion model

Abstract: We study a susceptible–infected–susceptible reaction–diffusion model with spatially heterogeneous disease transmission and recovery rates. A basic reproduction number is defined for the model. We first prove that there exists a unique endemic equilibrium if . We then consider the global attractivity of the disease-free equilibrium and the endemic equilibrium for two cases. If the disease transmission and recovery rates are constants or the diffusion rate of the susceptible individuals is equal to the diffusion rate of the infected individuals, we show that the disease-free equilibrium is globally attractive if , while the endemic equilibrium is globally attractive if .

The Hall-Petch effect as a manifestation of the general size effect.

Abstract: The experimental evidence for the Hall-Petch dependence of strength on the inverse square-root of grain size is reviewed critically. Both the classic data and more recent results are considered. While the data are traditionally fitted to the inverse square-root dependence, they also fit well to many other functions, both power law and non-power law. There have been difficulties, recognized for half-a-century, in the inverse square-root expression. It is now explained as an artefact of faulty data analysis. A Bayesian meta-analysis shows that the data strongly support the simple inverse or lnd/d expressions. Since these expressions derive from underlying theory, they are also more readily explicable. It is concluded that the Hall-Petch effect is not to be explained by the variety of theories found in the literature, but is a manifestation of, or to be underlain by the general size effect observed throughout micromechanics, owing to the inverse relationship between the stress required and the space available for dislocation sources to operate.

Origami tubes with reconfigurable polygonal cross-sections.

Abstract: Thin sheets can be assembled into origami tubes to create a variety of deployable, reconfigurable and mechanistically unique three-dimensional structures. We introduce and explore origami tubes with polygonal, translational symmetric cross-sections that can reconfigure into numerous geometries. The tubular structures satisfy the mathematical definitions for flat and rigid foldability, meaning that they can fully unfold from a flattened state with deformations occurring only at the fold lines. The tubes do not need to be straight and can be constructed to follow a non-linear curved line when deployed. The cross-section and kinematics of the tubular structures can be reprogrammed by changing the direction of folding at some folds. We discuss the variety of tubular structures that can be conceived and we show limitations that govern the geometric design. We quantify the global stiffness of the origami tubes through eigenvalue and structural analyses and highlight the mechanical characteristics of these systems. The two-scale nature of this work indicates that, from a local viewpoint, the cross-sections of the polygonal tubes are reconfigurable while, from a global viewpoint, deployable tubes of desired shapes are achieved. This class of tubes has potential applications ranging from pipes and micro-robotics to deployable architecture in buildings.

Encoding Gaussian curvature in glassy and elastomeric liquid crystal solids

Abstract: We describe shape transitions of thin, solid nematic sheets with smooth, preprogrammed, in-plane director fields patterned across the surface causing spatially inhomogeneous local deformations. A metric description of the local deformations is used to study the intrinsic geometry of the resulting surfaces upon exposure to stimuli such as light and heat. We highlight specific patterns that encode constant Gaussian curvature of prescribed sign and magnitude. We present the first experimental results for such programmed solids, and they qualitatively support theory for both positive and negative Gaussian curvature morphing from flat sheets on stimulation by light or heat. We review logarithmic spiral patterns that generate cone/anti-cone surfaces, and introduce spiral director fields that encode non-localized positive and negative Gaussian curvature on punctured discs, including spherical caps and spherical spindles. Conditions are derived where these cap-like, photomechanically responsive regions can be anchored in inert substrates by designing solutions that ensure compatibility with the geometric constraints imposed by the surrounding media. This integration of such materials is a precondition for their exploitation in new devices. Finally, we consider the radial extension of such director fields to larger sheets using nematic textures defined on annular domains.

Efficient molecular dynamics using geodesic integration and solvent-solute splitting.

Abstract: We present an approach to Langevin dynamics in the presence of holonomic constraints based on decomposition of the system into components representing geodesic flow, constrained impulse and constrained diffusion We show that a particular ordering of the components results in an integrator that is an order of magnitude more accurate for configurational averages than existing alternatives Moreover, by combining the geodesic integration method with a solvent–solute force splitting, we demonstrate that stepsizes of at least 8 fs can be used for solvated biomolecules with high sampling accuracy and without substantially altering diffusion rates, approximately increasing by a factor of two the efficiency of molecular dynamics sampling for such systems The methods described in this article are easily implemented using the standard apparatus of modern simulation codes

Tuned resonant mass or inerter-based absorbers: unified calibration with quasi-dynamic flexibility and inertia correction

Abstract: A common format is developed for a mass and an inerter-based resonant vibration absorber device, operating on the absolute motion and the relative motion at the location of the device, respectively. When using a resonant absorber a specific mode is targeted, but in the calibration of the device it may be important to include the effect of other non-resonant modes. The classic concept of a quasi-static correction term is here generalized to a quasi-dynamic correction with a background inertia term as well as a flexibility term. An explicit design procedure is developed, in which the background effects are included via a flexibility and an inertia coefficient, accounting for the effect of the non-resonant modes. The design procedure starts from a selected level of dynamic amplification and then determines the device parameters for an equivalent dynamic system, in which the background flexibility and inertia effects are introduced subsequently. The inclusion of background effect of the non-resonant modes leads to larger mass, stiffness and damping parameter of the device. Examples illustrate the relation between resonant absorbers based on a tuned mass or a tuned inerter element, and demonstrate the ability to attain balanced calibration of resonant absorbers also for higher modes.

Investigating the multiplicity and concentration behaviour of solutions for a quasi-linear Choquard equation via the penalization method

Abstract: We study the multiplicity and concentration behaviour of positive solutions for a quasi-linear Choquard equation where Δ p is the p-Laplacian operator, 1 < p < N, V is a continuous real function on ℝ N , 0 < μ < N, F(s) is the primitive function of f(s), e is a positive parameter and * represents the convolution between two functions. The question of the existence of semiclassical solutions for the semilinear case p = 2 has recently been posed by Ambrosetti and Malchiodi. We suppose that the potential satisfies the condition introduced by del Pino and Felmer, i.e.V has a local minimum. We prove the existence, multiplicity and concentration of solutions for the equation by the penalization method and Lyusternik–Schnirelmann theory and even show novel results for the semilinear case p = 2.

Physical modelling of tsunamis generated by three-dimensional deformable granular landslides on planar and conical island slopes

Abstract: Tsunamis generated by landslides and volcanic island collapses account for some of the most catastrophic events recorded, yet critically important field data related to the landslide motion and tsunami evolution remain lacking. Landslide-generated tsunami source and propagation scenarios are physically modelled in a three-dimensional tsunami wave basin. A unique pneumatic landslide tsunami generator was deployed to simulate landslides with varying geometry and kinematics. The landslides were generated on a planar hill slope and divergent convex conical hill slope to study lateral hill slope effects on the wave characteristics. The leading wave crest amplitude generated on a planar hill slope is larger on average than the leading wave crest generated on a convex conical hill slope, whereas the leading wave trough and second wave crest amplitudes are smaller. Between 1% and 24% of the landslide kinetic energy is transferred into the wave train. Cobble landslides transfer on average 43% more kinetic energy into the wave train than corresponding gravel landslides. Predictive equations for the offshore propagating wave amplitudes, periods, celerities and lengths generated by landslides on planar and divergent convex conical hill slopes are derived, which allow an initial rapid tsunami hazard assessment.

Mixed finite-element formulations in piezoelectricity and flexoelectricity.

Abstract: Flexoelectricity, the linear coupling of strain gradient and electric polarization, is inherently a size-dependent phenomenon. The energy storage function for a flexoelectric material depends not only on polarization and strain, but also strain-gradient. Thus, conventional finite-element methods formulated solely on displacement are inadequate to treat flexoelectric solids since gradients raise the order of the governing differential equations. Here, we introduce a computational framework based on a mixed formulation developed previously by one of the present authors and a colleague. This formulation uses displacement and displacement-gradient as separate variables which are constrained in a 'weighted integral sense' to enforce their known relation. We derive a variational formulation for boundary-value problems for piezo- and/or flexoelectric solids. We validate this computational framework against available exact solutions. Our new computational method is applied to more complex problems, including a plate with an elliptical hole, stationary cracks, as well as tension and shear of solids with a repeating unit cell. Our results address several issues of theoretical interest, generate predictions of experimental merit and reveal interesting flexoelectric phenomena with potential for application.

Universal recovery map for approximate Markov chains

Abstract: A central question in quantum information theory is to determine how well lost information can be reconstructed. Crucially, the corresponding recovery operation should perform well without knowing the information to be reconstructed. In this work, we show that the quantum conditional mutual information measures the performance of such recovery operations. More precisely, we prove that the conditional mutual information I(A:C|B) of a tripartite quantum state ρABC can be bounded from below by its distance to the closest recovered state RB→BC(ρAB), where the C-part is reconstructed from the B-part only and the recovery map RB→BC merely depends on ρBC. One particular application of this result implies the equivalence between two different approaches to define topological order in quantum systems.

Generalized statistical mechanics approaches to earthquakes and tectonics.

Abstract: Despite the extreme complexity that characterizes the mechanism of the earthquake generation process, simple empirical scaling relations apply to the collective properties of earthquakes and faults in a variety of tectonic environments and scales. The physical characterization of those properties and the scaling relations that describe them attract a wide scientific interest and are incorporated in the probabilistic forecasting of seismicity in local, regional and planetary scales. Considerable progress has been made in the analysis of the statistical mechanics of earthquakes, which, based on the principle of entropy, can provide a physical rationale to the macroscopic properties frequently observed. The scale-invariant properties, the (multi) fractal structures and the long-range interactions that have been found to characterize fault and earthquake populations have recently led to the consideration of non-extensive statistical mechanics (NESM) as a consistent statistical mechanics framework for the description of seismicity. The consistency between NESM and observations has been demonstrated in a series of publications on seismicity, faulting, rock physics and other fields of geosciences. The aim of this review is to present in a concise manner the fundamental macroscopic properties of earthquakes and faulting and how these can be derived by using the notions of statistical mechanics and NESM, providing further insights into earthquake physics and fault growth processes.

Modelling density segregation in flowing bidisperse granular materials

Abstract: Preventing segregation in flowing granular mixtures is an ongoing challenge for industrial processes that involve the handling of bulk solids. A recent continuum-based modelling approach accurately predicts spatial concentration fields in a variety of flow geometries for mixtures varying in particle size. This approach captures the interplay between advection, diffusion and segregation using kinematic information obtained from experiments and/or discrete element method (DEM) simulations combined with an empirically determined relation for the segregation velocity. Here, we extend the model to include density-driven segregation, thereby validating the approach for the two important cases of practical interest. DEM simulations of density bidisperse flows of mono-sized particles in a quasi-two-dimensional-bounded heap were performed to determine the dependence of the density-driven segregation velocity on local shear rate and particle concentration. The model yields theoretical predictions of segregation patterns that quantitatively match the DEM simulations over a range of density ratios and flow rates. Matching experiments reproduce the segregation patterns and quantitative segregation profiles obtained in both the simulations and the model, thereby demonstrating that the modelling approach captures the essential physics of density-driven segregation in granular heap flow.

Crack nucleation using combined crystal plasticity modelling, high-resolution digital image correlation and high-resolution electron backscatter diffraction in a superalloy containing non-metallic inclusions under fatigue

Abstract: A crystal plasticity finite-element model, which explicitly and directly represents the complex microstructures of a non-metallic agglomerate inclusion within polycrystal nickel alloy, has been developed to study the mechanistic basis of fatigue crack nucleation. The methodology is to use the crystal plasticity model in conjunction with direct measurement at the microscale using high (angular) resolution-electron backscatter diffraction (HR-EBSD) and high (spatial) resolution-digital image correlation (HR-DIC) strain measurement techniques. Experimentally, this sample has been subjected to heat treatment leading to the establishment of residual (elastic) strains local to the agglomerate and subsequently loaded under conditions of low cyclic fatigue. The full thermal and mechanical loading history was reproduced within the model. HR-EBSD and HR-DIC elastic and total strain measurements demonstrate qualitative and quantitative agreement with crystal plasticity results. Crack nucleation by interfacial decohesion at the nickel matrix/agglomerate inclusion boundaries is observed experimentally, and systematic modelling studies enable the mechanistic basis of the nucleation to be established. A number of fatigue crack nucleation indicators are also assessed against the experimental results. Decohesion was found to be driven by interface tensile normal stress alone, and the interfacial strength was determined to be in the range of 1270–1480 MPa.

Reciprocity, passivity and causality in Willis materials

Abstract: Materials that require coupling between the stress-strain and momentum-velocity constitutive relations were first proposed by Willis (Willis 1981 Wave Motion3, 1-11 (doi:101016/0165-2125(81)90008-1)) and are now known as elastic materials of the Willis type, or simply Willis materials As coupling between these two constitutive equations is a generalization of standard elastodynamic theory, restrictions on the physically admissible material properties for Willis materials should be similarly generalized This paper derives restrictions imposed on the material properties of Willis materials when they are assumed to be reciprocal, passive and causal Considerations of causality and low-order dispersion suggest an alternative formulation of the standard Willis equations The alternative formulation provides improved insight into the subwavelength physical behaviour leading to Willis material properties and is amenable to time-domain analyses Finally, the results initially obtained for a generally elastic material are specialized to the acoustic limit

A computational framework for ptychographic reconstructions

Abstract: Ptychography is now a well-established X-ray microscopy tool for synchrotron end-stations equipped with a scanning stage and a pixelated detector. Ptychographic phasing algorithms use information from coherent diffraction to deliver quantitative images of the specimen at a resolution higher than the scanning resolution. These algorithms have traditionally been implemented in software on a per-instrument basis in various degrees of user-friendliness and sophistication. Here, we present Ptypy, a ptychography software written with the intention to serve as a framework across the diverse sets of available instruments and usage cases. A distinctive feature of the software is its formalism, which provides a convenient abstraction of the physical model, thus allowing for concise algorithmic implementations and portability across set-up geometries. We give an overview of the supported usage cases, explain the abstraction layer and design principles, and provide a step-by-step guide describing how an algorithm may be realized in a concise and readable manner. The software capabilities are illustrated with reconstructions from visible light and X-ray data.

Sintering of viscous droplets under surface tension

Abstract: We conduct experiments to investigate the sintering of high-viscosity liquid droplets. Free-standing cylinders of spherical glass beads are heated above their glass transition temperature, causing them to densify under surface tension. We determine the evolving volume of the bead pack at high spatial and temporal resolution. We use these data to test a range of existing models. We extend the models to account for the time-dependent droplet viscosity that results from non-isothermal conditions, and to account for non-zero final porosity. We also present a method to account for the initial distribution of radii of the pores interstitial to the liquid spheres, which allows the models to be used with no fitting parameters. We find a good agreement between the models and the data for times less than the capillary relaxation timescale. For longer times, we find an increasing discrepancy between the data and the model as the Darcy outgassing time-scale approaches the sintering timescale. We conclude that the decreasing permeability of the sintering system inhibits late-stage densification. Finally, we determine the residual, trapped gas volume fraction at equilibrium using X-ray computed tomography and compare this with theoretical values for the critical gas volume fraction in systems of overlapping spheres.

Multi-scale modelling of rubber-like materials and soft tissues: an appraisal.

Abstract: We survey, in a partial way, multi-scale approaches for the modelling of rubber-like and soft tissues and compare them with classical macroscopic phenomenological models. Our aim is to show how it is possible to obtain practical mathematical models for the mechanical behaviour of these materials incorporating mesoscopic (network scale) information. Multi-scale approaches are crucial for the theoretical comprehension and prediction of the complex mechanical response of these materials. Moreover, such models are fundamental in the perspective of the design, through manipulation at the micro- and nano-scales, of new polymeric and bioinspired materials with exceptional macroscopic properties.

Are some people suffering as a result of increasing mass exposure of the public to ultrasound in air

Abstract: New measurements indicate that the public are being exposed, without their knowledge, to airborne ultrasound. Existing guidelines are insufficient for such exposures; the vast majority refers to occupational exposure only (where workers are aware of the exposure, can be monitored and can wear protection). Existing guidelines are based on an insufficient evidence base, most of which was collected over 40 years ago by researchers who themselves considered it insufficient to finalize guidelines, but which produced preliminary guidelines. This warning of inadequacy was lost as nations and organizations issued ‘new’ guidelines based on these early guidelines, and through such repetition generated a false impression of consensus. The evidence base is so slim that few reports have progressed far along the sequence from anecdote to case study, to formal scientific controlled trials and epidemiological studies. Early studies reported hearing threshold shifts, nausea, headache, fatigue, migraine and tinnitus, but there is insufficient research on human subjects, and insufficient measurement of fields, to assess what health risk current occupational and public exposures might produce. Furthermore, the assumptions underpinning audiology and physical measurements at high frequencies must be questioned: simple extrapolation of approaches used at lower frequencies does not address current unknowns. Recommendations are provided.

Self-locking degree-4 vertex origami structures.

Abstract: A generic degree-4 vertex (4-vertex) origami possesses one continuous degree-of-freedom for rigid folding, and this folding process can be stopped when two of its facets bind together. Such facet-binding will induce self-locking so that the overall structure stays at a pre-specified configuration without additional locking elements or actuators. Self-locking offers many promising properties, such as programmable deformation ranges and piecewise stiffness jumps, that could significantly advance many adaptive structural systems. However, despite its excellent potential, the origami self-locking features have not been well studied, understood, and used. To advance the state of the art, this research conducts a comprehensive investigation on the principles of achieving and harnessing self-locking in 4-vertex origami structures. Especially, for the first time, this study expands the 4-vertex structure construction from single-component to dual-component designs and investigates their self-locking behaviours. By exploiting various tessellation designs, this research discovers that the dual-component designs offer the origami structures with extraordinary attributes that the single-component structures do not have, which include the existence of flat-folded locking planes, programmable locking points and deformability. Finally, proof-of-concept experiments investigate how self-locking can effectively induce piecewise stiffness jumps. The results of this research provide new scientific knowledge and a systematic framework for the design, analysis and utilization of self-locking origami structures for many potential engineering applications.