Journal ArticleDOI
Effect of titanium diboride ceramic particles on mechanical and wear behaviour of Cu-10 wt% W alloy composites processed by P/M route
B. Stalin,M. Ravichandran,G.T. Sudha,Alagar Karthick,K. Soorya Prakash,A. Benjamin Asirdason,S. Saravanan +6 more
TLDR
In this paper, the impact of wear test input parameters on the wear rate is identified and the optimized parameter to attain low wear rate was determined through Taguchi and ANOVA analysis by using L16 orthogonal array.About:
This article is published in Vacuum.The article was published on 2021-02-01. It has received 32 citations till now. The article focuses on the topics: Titanium diboride & Powder metallurgy.read more
Citations
More filters
Journal ArticleDOI
Agro Waste Sugarcane Bagasse as a Cementitious Material for Reactive Powder Concrete
TL;DR: In this paper, it is inferred from the findings obtained from the energy dispersive study of X-ray (EDAX) that the presence of reactive silica in bagasse ash could be substituted by RPC ingredients due to heat treatment.
Journal ArticleDOI
Microstructural and Mechanical Behaviors of Friction Stir Welded Dissimilar AA6082-AA7075 Joints
M. Vetrivel Sezhian,K. Giridharan,D. Peter Pushpanathan,G. Chakravarthi,B. Stalin,Alagar Karthick,P. Manoj Kumar,Murugesan Bharani +7 more
TL;DR: In this paper, microstructural events and mechanical behaviors in dissimilar friction stir welding (FSW) of aluminium alloy AA6082-AA7075 joints have been evaluated to apply aerospace, defense, and military sectors.
Journal ArticleDOI
Comprehensive review on recycling of spent lithium-ion batteries
V. Chandran,Aritra Ghosh,Chandrashekhar K. Patil,Vinayagam Mohanavel,A.K. Priya,Robbi Rahim,R. Madavan,U. Muthuraman,Alagar Karthick +8 more
TL;DR: In this article, the degradation mechanisms of lithium-ion secondary batteries are divided into three degradation modes: loss of conductivity, a deficit of active material, and decline of lithium production.
Journal ArticleDOI
Performance assessment of free standing and building integrated grid connected photovoltaic system for southern part of India
V. S. Chandrika,M. Mohamed Thalib,Alagar Karthick,Ravishankar Sathyamurthy,A. Muthu Manokar,Umashankar Subramaniam,B. Stalin +6 more
TL;DR: This study will assist architects and wider community to design buildings roofs with GPV system which are more aesthetic and account for noise protection and thermal insulation in the region of equatorial climate zones.
Journal ArticleDOI
Application of r-GO-MMT Hybrid Nanofillers for Improving Strength and Flame Retardancy of Epoxy/Glass Fibre Composites
TL;DR: In this paper, reduced graphene oxide (r-GO) and montmorillonite (MMT) nanoclay were used as filler materials to fabricate hybrid epoxy-based nanocomposites.
References
More filters
Journal ArticleDOI
P/M aluminum matrix composites: an overview
TL;DR: In this paper, the state-of-the-art concerning powder metallurgy (P/M) aluminum matrix composites is reviewed and compared with other alternatives, and it is remarked that P/M could be remarked as a highly effective and economic method compared to other alternatives.
Journal ArticleDOI
Strengthening mechanisms in particulate metal matrix composites
W.S Miller,F.J Humphreys +1 more
Journal ArticleDOI
Effects of graphene content on the microstructure and properties of copper matrix composites
TL;DR: In this article, the impacts of graphene nanoplatelets on microstructure, mechanical performance, thermal diffusivity, electrical conductivity and tribological properties of the composites were investigated.
Journal ArticleDOI
Friction and wear of copper–graphite composites made with Cu-coated and uncoated graphite powders
TL;DR: In this article, a pin-on-ring tribometer was used to test the wear properties of graphite composites of 8, 15, and 20% graphite powders.
Journal ArticleDOI
Interfacial design of Cu-based composites prepared by powder metallurgy for heat sink applications
TL;DR: In this article, a vapour deposited molybdenum coating on SiC powders has been used to improve the bonding strength and thermo-physical properties of the composites, using atomized Cu(X) alloys with minor additions of carbide formers.